Insulated cables - Import export

The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. Wire bushing, also known as insulating bushing, is a new type of composite pipe with insulating materials. It is made of resin matrix and other reinforced materials. It is used to wear wires and protect wires, so it is called wire bushing. The insulating sleeve has the characteristics of strong pressure resistance, light weight, smooth inner wall and small friction coefficient, so it is easy to wear the wire without damaging the wire. It is easier and more convenient to move and transport than metal steel pipe and cement pipe. The construction and installation are simple and convenient, which saves both trouble and labor. Strong corrosion resistance, insulation, non-magnetic, acid and alkali resistance, flame retardant, antistatic.

FOAM-SKIN-PE-INSULATED SUBSCRIBER CABLE, FILLED WITH SWELLABLE MATERIALS In all kinds of operating premises (excepted locations with special protection demands - like in fire or highly combustible premises). In telecommunication network systems and similar systems, for example as PTT subscriber’s cable.

FOAM-SKIN-PE INSULATED INDOOR CABLE WITH TWO TIGHT BUFFERED SINGLEMODE FIBERS Hybrid-cable for inhouse application in high-speed-access telecommuncation networks in customer premises

PE-INSULATED, JELLY FILLED, LOCAL TELECOMMUNICATION CABLE In all kinds of operating premises (excepted locations with special protection demands - like in fire or highly combustible premises); e.g. for local area networks of the telecom, as station communication cables and for small telephone networks of industry, traffic and public utilities.

For fixed connection on electric appliances, equipment, gathering mounts of electric distribution appliances for rated alternating voltage 1000V. Used for laying in buildings, channels, tunnels if there is no danger of mechanical influence on the cables. During laying in single layer the cable is flame retardantThe structure of conductor core is single-wire and conforms to 1 class flexibility according to the standard 22483-2012. The section of conductor core is 2,5; 4; 6; 10mm2. Number of cores in the cable: 2.5mm2-4, 5, 7, 10, 14, 19; 27; 37 4: 10mm2-4, 7, 10 During laying in single layer the cable is flame retardantIn each bundle by existence of counting pair, which differs in color from other cores. Labeling can be done by means of inscription of separate numbers on insulated cores or distinctive colors of insulation can be used. While numeric labeling the color of figures must be different from the color of the insulation of the core. On the surface of the cover an inscription

For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For stretching in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forcesThe aluminum cores with section 2,5-25mm2 inclusive are produced of single wire of 1 class flexibility according to Gost standard 22483-2012. Number of cores in the cable 2,3.The aluminum cores with section 2,5-25mm2 inclusive are produced of single wire of 1 class flexibility according to Gost standard 22483-2012. Number of cores in the cable 2,3.

All types of fireproof doors. Fireproof shutters. Products for shielding of all types of technical equipment (electrical cables, insulated and non-insulated sanitary heating pipes, PP/PE pipes, fireproof dampers). Fire-protection products for ventilation ducts and cable trays. Fire-protection products to protect my load-bearing structures (fireproof plates, paint, flocking, etc.) Fire-protection products for fireproof compartmentalisation: fireproof partitions and ceilings. Products for decorating elevator cars made of materials that are difficult to ignite. Fireproof valves, grilles, sleeves, seals and hatches. Fireproof compartmentalisation for protecting people and property Fireproof compartmentalisation, the means used Fireproof compartmentalisation is done by means of: Fireproof doors, curtains, shutters Fireproof partitions Fireproof ceilings Fireproof shielding Contact us for a quote or informations.

Mineral insulated thermocouples are pressed thermo wires in fire resistant magnesium oxide which ensure a high pressure resistance. They are suited for the temperature range -200…+1100 °C. The shock resistant contruction guarantees a long life span.

Mineral insulated thermocouples are pressed thermo wires in fire resistant magnesium oxide which ensure a high pressure resistance. They are suited for the temperature range -200…+1100 °C. The shock resistant contruction guarantees a long life span.

Mineral insulated thermocouples are thermo wires compressed in fire resistant magnesium oxide which ensure high pressure resistance. They are suited for the temperature range -200…+1100 °C. Their shock resistant construction assures a long life span.

Mineral insulated thermocouples are pressed thermo wires in fire resistant magnesium oxide which ensure a high pressure resistance. They are suited for the temperature range -200…+1100 °C. The shock resistant contruction guarantees a long life span.

Mineral insulated thermocouples are pressed thermo wires in fire resistant magnesium oxide which ensure a high pressure resistance. They are suited for the temperature range -200…+1100 °C. The shock resistant contruction guarantees a long life span.

Mineral insulated thermocouples are pressed thermo wires in fire resistant magnesium oxide which ensure a high pressure resistance. They are suited for the temperature range -200…+1100 °C. The shock resistant contruction guarantees a long life span.

Mineral insulated thermocouples are pressed thermo wires in fire resistant magnesium oxide which ensure a high pressure resistance. They are suited for the temperature range -200…+1100 °C. The shock resistant contruction guarantees a long life span.

4in1 Piercing connector for model number IPC4116120: IP67 waterproof; UV-resistant; Anti-corrosive; Low voltage; Constant torque nut; Copper tin plated conductor; Inner waterproof silica gel.

In linguistic usage occasionally the terms coil heaters, nozzle heating elements, hot runner heating elements, cable nozzle heaters are used. Our HotMicroCoil heating elements can be used in a wide variety of applications. Their high level of plasticity ideally suits them to the heating of hot runner nozzles and for accurately heating the contours of three-dimensional surfaces. Many of our customers order HotMicroCoil elements in their unformed state of mineral insualted cable heaters and perform the subsequent shaping work themselves, while others commission us to shape and fit the heating cable elements. A large number of ready-to-fit heating solutions are available for plastic injection nozzles with clamping mechanisms, housing bezel, reflection tube or heat conduction sleeve.

Owing to their small cross-sectional dimensions, MicroCoils are most often connected at both ends and do not permit the addition of a thermocouple. We prefer to use nickel as the sheath material here because it combines the best thermal conduction properties, high corrosion resistance and excellent deformation properties. To ensure that the standard 1000 mm PTFE-insulated connection cable can be positioned at one end, despite the standard two-ended connection of the element, in most cases the MicroCoil is formed into a hairpin shape and wound/laid in a bifilar (parallel) format. Our unformed MicroCoils are also supplied in the hairpin bend shape as standard.

Application: Crimp-insert can be fitted in the entrance hole of the connector. Designed for soldering or crimping on mineral insulated metal sheathed cable or crimping on insulated wire. Construction: • Brass machined insert with 0,1 mm tolerance on the cable O.D. The adapter fits in all standard connectors.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Ceramic housing with contacts of original thermocouple materials and 
spring-loaded sockets for reliable contact . • Reverse polarity protection by different contact pin widths. • Oversize screw head for easy wiring. • One-piece housing withstands great stresses. • Housing of high purity alumina oxide.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

it is characterized by high chemical resistance to certain acids, oils and fats. It is easy to weld, but it does not conduct heat, it is nontoxic and harmless to people. It is made of containers for yogurts, bottles, tourist plates, cable insulations, bumpers, gas installation pipes. He also found application in the production of laboratory and medical equipment.

Material: Amorphous, Semi-crystalline and Mineral Filled Semi-crystalline. PEEK (polyetheretherketone) Film Provides: ● High Temperature Performance ● Excellent Tribological Properties ● Broad Chemical Resistance ● High-Strength & Toughness ● Electrical Stability & Radiation Resistance ● Low Smoke & Toxic Gas Emission ● High-Purity, extremely low extractables Appication: ● Micro speaker diaphragm, dome tweeter. ● Presslire exchanger and senior oliaphragin. ● Aerospace high-speed rail insulation and TAB heat insulation components. ● Thrust washers for micro motors, gaskets for automobiles. ● High-temperature resistant label, pressure sensitive tape substrate. ● Insulation layer of electric vehicle battery. ● Flexible film surface heater. ● Wire, cable, insulation and wrcop sheaths.

Based on its specifications, this device can be used in various applications. It is especially suitable for resistance measurement on insulating materials such as e.g. cable insulations, foils, textiles, surfaces, insulating liquids,etc. With a test voltage of 45 V, 100 V, 250 V and 500 V the device fulfi ls most test specifi cations such as e.g. DIN 51953, 53482 and 54345. The guard switching allows single resistance measurements in a triangle wiring. This could be e.g. a two line cable with common shield or the measurement of insulating materials on a guardring measurement cell. The selection of the measurement range is done manually or automatically. Fast subsequent measurements can be realized by the internal limit value indicator. When the measured value exceeds the limit the limit value indicator switches and activates a potential-free relay output. The megohmmeter RESISTOMAT® model 24508 is the right instrument for its use in laboratory as well as in industrial applications.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection

Solar cable management clip Product specifications Solar Cable Clips are smart designs for fixing cables on solar panels shall not lay on roofs or floors with clips which simplify wire management and create a cleaner aesthetic to solar PV arrays. They are made of stainless steel 301 which makes them durable, long lasting and reliable solution for all environments. They are easy to be installed and can be reused. This cable clips can be used in wide variety of mounting configurations for module and rail applications. Customs designs and package available upon request for OEM. Made with corrosion resistant 301 stainless steel or spring grade stainless steel; Dual or four wire compartments; Wide variety of mounting configurations; Accommodation for a broad range of cable combinations and sizes (e.g., PV, AC module and micro inverter cables); Special tab for easy installation & removal without any tool; Coined edges to prevent damage to cable insulation.

Typical application: Thermal insulation material for cables and pipelines for high temperature applications. The products are based on textured special glass and can be identified by their light green colour. Extremely textile properties even at high temperatures are their particular characteristic. isoTHERM® 800 is absolutely harmless to health, withstands high temperatures and has excellent chemical resistance properties. Available dimension: Inner diameter: 6 - 10 mm, 12 - 18 mm, 20 - 25 mm, 28 - 36 mm, 38 - 50 mm, wall thickness: 2 - 6 mm depending on the dimension.

CSN® copper and nickel are temperatureresistant connecting cables for internal wiring of electric household appliances such as hotplates, glass ceramic plates, grill appliances or storage heaters. In industrial applications CSN® Cables are preferably used for the wiring of heating elements, heating cartridges, tubular heaters, panel heaters, and quartz radiators. We manufacture these singlecore cables in cross sections up to 6 mm². Owing to their high temperature resistance up to 250 °C in the case of glass silk insulation and 600 °C in the case of mineral fibre insulation, these connecting cables meet the most demanding requirements.