Metal roofing - Import export

The Angastiniotes A10 is a standard-fix corrugated sheet which can be used for building applications as single skin sheeting and cladding, over clad of an existing roof or part of a built up insulated system. It can be installed both horizontally and vertically. The A10 Trapezoidal profile is best suited for wall cladding. The profile is made up of a series of corrugations, each in the shape of a trapezium, which lap together side to side and end to end, making it very easy to cover varying areas of roof and wall quickly. The profile sheets are typically coated steel, but can also be supplied in aluminium. Fixings are located normally through the 'pan' of the profile, rather than through the corrugation. Sheets can be used as a single sheet (single skin) installation or as an external skin to a built-up roof system

The Angastiniotes A34 is a standard-fix trapezoidal sheet which can be used for building applications as single skin sheeting and cladding, over clad of an existing roof or part of a built up insulated system. It can be installed both horizontally and vertically. The A34 Trapezoidal profile is best suited for roof pitches greater than 4 degrees. The profile is made up of a series of corrugations, each in the shape of a trapezium, which lap together side to side and end to end, making it very easy to cover varying areas of roof quickly. The profile sheets are typically coated steel, but can also be supplied in aluminium. Fixings are located normally through the 'pan' of the profile, rather than through the corrugation. Sheets can be used as a single sheet (single skin) installation or as an external skin to a built-up roof system.

The Angastiniotes Corrugated profile is a standard-fix sheet which can be used for building applications as single skin sheeting and cladding, over clad of an existing roof or part of a built up insulated system. It can be installed both horizontally and vertically. ​ Although Angastiniotes Corrugated profile are mainly fitted to industrial and commercial premises, more and more architects, planners and builders are using the elegant profile sheets on administrative buildings and private houses. Thanks to their sinusoidal form, Angastiniotes Corrugated profile produce a soft, smooth surface appearance. The Angastiniotes Corrugated profile cladding gives it a unique versatility for architectural applications.Still favoured for traditional styled applications, it is also the first choice for contemporary steel-roofed homes and it's the best solution for livestock as its shape form avoids creases of material that means it can resist the aggressive environment of ammonia.

Designed to protect joists against moisture and rainwater and thus increase the life of the terrace. 100% waterproof band. Resistance Resistance to temperatures from 40°C to +60°C. Resistances to atmospheric agents UV and freeze. Robust, the band is tearproof and nondeformable. 100% waterproof, protect and extends the service life of the joists structure. Manufacturing Made in France, the RINNO bituminous tape is made with bitumen, aluminium foil and silicone protection. Conformity RINNO bituminous tape comply with current standards DTU 43.1. Self adhesive bituminous tape Place the tape on a dry and clean support. Adheres to most building materials wood, plastic, glass, concrete, metal. Ideal for wood, roof, piping, framing… Robust, the band is tearproof and nondeformable. Reduce resonance when walking on the terrace. Protects and extends the service life of the joist structure.

Available for: Several systems of roofing tiles Available surfaces: Hot dip galvanized Galvanized and powder - coated Solid copper We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Available for: Several systems of roofing tiles Available surfaces: Hot dip galvanized Galvanized and powder - coated Solid copper We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Available for: Several systems of roofing tiles Available surfaces: Hot dip galvanized Galvanized and powder - coated We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Available for: Several systems of roofing tiles Available surfaces: Hot dip galvanized Galvanized and powder - coated We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

Shelter structure is formed by zinc tube 57 mm roof is formed by zinc trapezial metal sheet. Roof supporting frame is made of rolled "U" beam 120. Shelter is delivered dismantled including fasteners. Its mounting to the floor is necessary for the shelter safe operation. Assembly manual forms a part of delivery. Optional equipment. Side frame panel and a bike stand can be ordered additionally to the shelter

Our quality products like benches, seatings, loungers, modular benches, tables and picnic, litter bins, planters, bike racks, bike shelters, pergolas, roofings, barriers, display boards, and many more. All products stand for robustness, durability, functionality, vandalism resistance, and attention to detail. (The goods directly from the manufacturer – excluding brokers – best price and prompt delivery time.)

PVC roof windows are made of white plastic profiles with their 112-mm frame depth and 115-mm casement (leaf) depth. These profiles are reinforced with solid, galvanized steel profiles both in the casement (leaf) and in the frame. The pivot system with increased rotation of the shaft which guarantees the ease of use. Humidity-and-temperature-changes resistant\ Mounting frames for flat and corrugated roofing Sheet metal parts RAL 8019 (brown) or RAL 7043 (grey).

Washer for roofing screws With EPDM rubber gasket, galvanized / has no official standard The washer for the roofing screw is equipped with an EPDM rubber gasket made of ethylene, propylene, diene, methylene. It is not used without a self-tapping screw. The metal part of the washer is coated with white zinc. When painting the roofing screw, the metal part of the washer surface is painted. Coating of the metal part: white zinc. Gasket material: neoprene or EPDM E - ethylene, P - propylene, D - diene, M - methylene. Attention! The thickness of the EPDM rubber gasket on the washer is 2.4-2.8 mm.

Garden gazebo. Garden table with benches and canopy. The best solution for a countryhouse. Own development of the company "RUD E.S." The production uses the best materials from the world's leading manufacturers: industrial varnishes "Renner" (Italy) and thermoplastic paints "Pullron" (Turkey) The canopy roof fabric is Navigator with UV protection and water-repellent properties. Full set. L*W*H - 2200 mm * 2500 mm * 2000 mm Can be equipped with an anti-mosquito tent. Peculiarities: the benches and the table are made of Carpathian spruce boards, treated with Renner antiseptic, coated with Renner varnish (Italy). Industrial furniture varnish with water-repellent additives, resistance to ultraviolet radiation and various weather conditions guarantees durability in harsh operating conditions. The color of the awning is in perfect harmony with the color of the frame and roof. Metal parts are painted with special polyethylene powder paint Pullron, which is anti-vandal, anti-graffiti.

We manufactre glass and metal roof hatches for the buses and coaches. We have many different measures and dimensions. You are always welcomed to contact.

You can use this stainless steel anchor on trapezoidal sheeting (positive or negative) either as an anchorage point or for attaching a safety net. The special toggle bolt included in the package comes with its own integrated seal. EN 795:2012, A + EN 1263-2:2014 Sandwich and trapezoidal sheeting (positive/ negative) Steel ≥ 0.75 mm Aluminium ≥ 2.00 mm

This stainless steel, type B roof safety hook for metal seam roofs is suitable for all directions of load (apart from axial loads). It is simply clamped onto a seam without needing to penetrate the roof surface. Our roof hook is installed quickly and easily using the 4 nuts and bolts supplied. Roof safety hook in accordance with EN 517:2006, type B Anchorage point for PPE + ladder hooks For stainless steel ≥ 0.5mm; copper and titanium zinc ≥ 0.6mm; aluminium ≥ 0.7mm Simple, penetration-free installation using just 4 bolts Designed for rounded-edge and standing edge roofs Incl. stainless steel installation set

Depending on the subsurface (steel, copper, aluminium or titanium zinc), this stainless steel anchorage point can be installed on a metal roof using either aluminium or brass clamps. It is simply attached to a standing or copper standing seam using the specially-designed clamps supplied - completely penetration-free. EN 795:2012, A + CEN/TS 16415:2013 Freely-rotating anchor eyelet Clamped onto a seam without penetrating your roof surface Mounted on a single seam For steel and stainless steel ≥ 0.5 mm; copper ≥ 0.6 mm; titanium zinc and aluminium ≥ 0.7 mm For Rheinzink and similar systems Incl. installation set

Thanks to its robust aluminium clamps, this stainless steel anchorage point can be attached to a metal seam roof with special profiles (KlipTec, Snapfalz etc.) without needing to penetrate the roof surface. The device can be flexibly attached to two seams spaced 300-660 mm apart. EN 795:2012, A + CEN/TS 16415:2017 Clamped onto two adjacent seams - completely penetration-free Seam intervals: 300 - 450 mm / 420 - 660 mm Sheet thickness ≥ 0.75mm e.g. KlipTec, Snapfalz or similar Incl. installation set We also supply a protruding model for use in a lifeline system

The stationary clinching unit DFG 400/50 PH is our cheapest model with which you can enter into a stationary and reliable production. A compressed air connection with a maximum inlet pressure of 16 bar is necessary and the operating pressure is adjustable. Designed for use cases in ventilation and ducting industry, sound proofing, steel and metal working industry, sign manufacturing, roof building, plumbing, computers, electronics and lighting industry. • Favourable stationary solution • Processing of bulky or hollow components • Large horizontal and vertical throat • High-value joining result due to adjustable path restriction • Reproducible results • Suitable for use under permanent load • Low-noise Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

SIZE Width : 2.3 m Length : 2.3 m h. 2.5 m Metal construction with wooden roof Covered with Shingle

Product is designed for direct painting of galvanized, aluminum and steel surfaces and for renovation of old paint coatings coated on galvanized metal sheets, e.g. covering roofs, windowsills, gates and fences. The paint can be also used to cover concrete and wooden elements, providing very good coverage and uniform colouring of the surface. High resistant to atmospheric agents in industrial and marine environments. The paint will find many applications in the household.

Common nails are used for installation of a wooden covering of facades and gables and at other construction works. And also at construction of frameworks of houses, fastening of rafters, lattices for a metal tile or a professional flooring, a metal professional flooring and other roofing materials.

The exquisite curved pattern is contemporary and elegant, which makes a timeless statement and the finest finishing touches.