Vertical pumps - Import export

Versatile, turnkey diesel high-pressure pumping units Special applications require customised high-pressure systems, which KAMAT can provide from the initial project idea through to turnkey installation, with 100% of the manufacture taking place in-house. Depending on the application, our customers can choose from a range of drives, power transmission components, PLC controls, measuring systems, data transmission, remote controls, pneumatic and electric valve controls, chassis and sound insulation. However, the units are ready for use on the base frame on which they are delivered. KAMAT diesel-powered units are traditionally used in industrial cleaning and pressure testing, mining and water hydraulics, but special solutions for special fluids or to meet explosion protection requirements are also part of the KAMAT range. It makes no difference whether the customer requires a mobile or stationary unit.

We manufacture rough or fully machined shaft liner and wearing ring for vertical pumps in duplex stainless steel Excellent wearing properties and resistance to corrosion. Very high hardness due to special heat treatment processes.

The main parts of magnetic couplings used in GNVC series vertical pumps are the driving (external) and the driven (internal) half couplings, and a sealing sleeve between the half couplings. The exceptional reliability of Villina magnetic couplings is the result of a high-tech design: the enclosed capsular design of the half couplings (enclosed body) secures the magnetic systems from environmental effects; the use of special adhesives allows for fast fixture of domestically produced permanent magnets based on rare-earth elements on the half coupling ferrules; double protection against overheating and demagnetization is implemented using the temperature sensor of the sealing sleeve, which is triggered when the maximum acceptable operating temperature is exceeded by 20 to 50°C, with the use of magnets with Curie point of more than 100°C higher than the maximum acceptable operating fluid temperature; the sealing sleeve made of high-strength Hastelloy alloys

Villina-VS1-M type pumps are designed for use in oil and gas and chemical industries for transit of explosive and highly flammable liquids as well as corrosive media and natural gas liquids. A distinctive feature of these pumps is the ability to transit contaminated liquids with particle size of 3 to 12 mm (depending on the pump rate). MAIN SPECIFICATIONS - Pump rate ranges: 2 to 108 m3/h; - Head: 11 to 178.5 m; - Temperature of the pumped fluid: -50°С to +440°С.

Vertical semi-submersible pumps are designed to solve the problem of pumping liquid out of a tank when a part of the pump is within the pumped medium. Pump units are used with the engine speed up to 3,000 rpm. Therefore, the temperature conditions for semi-submersible pumping units are up to 250 degrees. Centrifugal semi-submersible pumps are widely used both in petroleum refining (petroleum and drainage pumps) and the chemical industry, and in the food industry. They are used for transit of various liquids and mixtures including explosive and flammable fluids (oil and gas products, etc.). Semi-submersible pumps are in between surface and submersible units and combine all their advantages, nevertheless, a semi-submersible pump is not designed to carry out specialized tasks for which these two types of units were created. Semi-submersible pumps consist of an electric motor, a working section and immersed sections. The engine is placed on a base plate

Vertical End Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with double mechanical seal. This pump series is designed for vertical installations next to a tank and for pumping highly air entrained coolant and cutting oils, as they occur in high speed grinding applications. The SBG pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G ¼. Volumetric delivery: up to 2250 l/min Delivery head: up to 62 m Please contact us for delivery quantity

Mid-frequency magnetron sputtering technology has gradually become the mainstream of sputtering coating technology. Coating: Multi-function metal coating, composite membrane, transparent conductive coating, Increase return to shoot coating, electromagnetic shielding coating, decorative coating, etc. Power supply: DC magnetron sputtering power supply, MF sputtering power supply, high pressure ion bombard power supply. Target: DC magnetron sputtering target, MF twin targets, planner target, cylinder target. Vacuum chamber structure: Vertical signal door, Vertical double doors. Pump system: Molecule pump (diffusion pump)+Roots pump+ Holding pump(optional: turbo pump, poly cold system) Air system: Mass flow controller (1-4road) Ultimate vacuum: 6x10-4pa (no-loading, clean chamber) Pumping time: No-loading from air to 5x10-3pa＜13mins Workplace motion mode: 6 axis/8axis/9axis public and self-rotation

0.55 kW Compact externally ventilated single-phase three-phase motor with capacitor, 5 m connection cable included and shock-proof plug. The motor is designed in a way that acid vapours or aggressive atmosphere cannot damage it. Light and convenient Quiet and durable Quick motor assembly/disassembly by Lutz hand wheel

Suitable for neutral and aggressive liquids as well as liquids containing solids Application: Centrifugal pump for dry-well installation featuring a bearing-less cantilever design with direct-coupled IEC motor. Specially designed for plant engineering and confined spaces. The B80 HME Series can be operated beside the container in a dry-well installation. Liquid flowing up inside the shaft guide tube returns to the container via an overflow line. Pumps in dry-well installations allow an easier access to carry out maintenance and repair work. Features: Directly-coupled in bearing-less cantilever design Radial and axial fixed drive elements in two-piece bearing shell Pump housing in glass-fibre or carbon-fibre reinforced plastic (PP or PVDF) Gas seal for protecting the motor bearing Plastic-coated drive shaft Driven by IEC standardised motors Benefits: Compact dimensions Service-friendly dry-well installation Self-centring alignment in the bearing shell Vibration-free and...

When circulating chemicals and pickling baths, reliability, safety and last but not least functionality are important. The submersible centrifugal pump was specially developed as a vertical, wet-installed pump for the rapid emptying of these liquids from tanks and basins. * available in special immersion depths on request * equipped with self-lubricating, liquid-wetted plain bearings. Features & Advantages * High flow rate * High efficiency * Smooth running * Low space requirement * Easy commissioning * Easy to maintain * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

CHAMBER VACUUM PACKAGING MACHINE DZ 410 T - VERTICAL Vacuum packaging machine for packaging in vertical envelopes containing coffee, rice, tea, powder products, fluid products, etc. The machine is built in stainless steel (AISI 304) and equipped with an electronic volumetric sensor with 3 programs digital panel. The compact size chamber and the vacuum pump with a capacity of 20 m3/h. ensure high productivity. Also available with filter for packing powdery products such as hazelnuts flour, milk powder and products with similar characteristics. The filter must be requested at time of order. The packaging machine is equipped with a painted wheeled support. Max thickness bag mm. 0.20 (0.8 total with bellows). By equipping the machine with jigs realized according to the specific dimensions of the product to be packaged, it is possible to obtain squared packs. The templates are not included with the machine.

The horizontal Drum and container pump F 430 TR is ideal for conveying media from IBCs, tanks and other containers with low level outlet. E.g. if a tank is not accessible from the top, or if the spatial conditions do not allow use of a vertical pump. For cleaning, the pump can be easily and quickly taken apart in its two main components. The pump is available in stainless steel or polypropylene. The stainless steel version can also be used in hazardous areas. Benefits: - For containers with floor drain - Provides highest flexibility in installation and mobility - Can also be used at low ceiling heights - Stainless steel version for use in hazardous areas - Can also be integrated into pipe systems - A horizontal centrifugal pump that can be used with different FLUX motors

The pump-kit MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can be used when an IBC is not accessible from the top. It is suitable for applications when gravity draining via the outlet tap is insufficient e.g. rapid dispensing or transfer to another container in a higher location. Power can ideally be provided by a commutator or compressed air motor. Product attributes: - For pumping out of IBCs directly from the outlet (with standard S60 x 6 thread) - Simple connection of the pump to the outlet by union nut - Compact design - Can be dismantled into two parts via clamp - Low overall weight of 1.2 kg - No need to mount pump to top of container - Does not require access to the container from above - Ideally combined with commutator motor or compressed-air motor Benefits: - Can be used where ceilings are low - Allows pumping directly from floor-level outlets, even when containers are stacked

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection

The horizontally installed, compact container pump MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can be used when an IBC is not accessible from the top. It is suitable for applications when gravity draining via the outlet tap is insufficient e.g. rapid dispensing or transfer to another container in a higher location. Power can ideally be provided by a commutator or compressed air motor. Benefits: - Can be used where ceilings are low - Allows pumping directly from floor-level outlets, even when containers are stacked - Significantly higher flow rate and pressure compared to draining by gravity - Minimal space requirement - Simple disconnection from IBC with union nut - Delivery against closed valve (e.g. hand nozzle, flap valve etc.) possible - Suitable for use in hazardous areas zone 1

The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to vertical Drum Pumps. Perfectly suited for the removal of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection on the bottom run of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of the medium when disconnected * Easy installation * Easy to dismantle * Low space requirement * Automatic emergency stop function of the engine in case of leakage detection * The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The horizontal Pump Set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Simple installation * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The horizontal Pump tube is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Perfectly suited for the discharge of concentrated acids and alkalis. * Optionally with leakage detection (Safety Box) * Horizontal connection at the bottom of the container * IBC connection: S60 x 6 Features & Advantages * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Easy to install * Easy to dismantle * Small footprint * Automatic emergency stop function of the motor in case of leakage detection * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The horizontal Pump tube is suitable for emptying highly aggressive, thin-bodied, flammable and explosive liquids from IBC containers or tanks and is the perfect alternative to the vertical Drum Pumps. Depending on the application, different Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. * Horizontal connection at the bottom run of the container * Pump tube equipped with Lutz original hand wheel * Suitable for emptying alternative fuels, oils, flammable liquids * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Explosion-proof versions for applications in hazardous areas (Zone 1 and 2) * Easy to dismantle * Low space requirement

The horizontal pumping unit is suitable for emptying aqueous and fatty foodstuffs from IBC containers or tanks and is the perfect alternative to vertical drum pumps. Depending on the application, various motors are available, which you can combine with the pumping unit at any time. This gives you flexibility at all times and saves important resources. * Horizontal connection at the bottom of the container * Also for alcoholic foodstuffs, cosmetics and pharmaceutical products as well as flammable cleaning agents * Optionally with electric or compressed air drive * Low loss of medium when disconnected * Food-safe connections * Approved in accordance with ATEX Directive 2014/34/EU, category 1/2 * Approved according to FDA and Regulation (EC) 1935/2004 The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

Aldea BLT 8-3 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 8-14 DN40 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-22 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-19 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-16 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 4-12 DN32 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT 2-18 DN25 vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.

Aldea BLT series vertical shaft booster, stainless steel, multistage centrifugal pump, has features such as high efficiency, low noise, stable operation. The pump set adopts vertical multi-stage structure without self-priming, which makes the product compact, easy to install, use and maintain. High-efficiency standard motor, Japanese NSK bearings and cold-rolled 50ww800 silicon steel sheet make the pump high-efficiency, low-noise and maintenance-free. Fully enclosed shaft seal, IP55 protection class, F class insulation class, special “double lock” drive end bearing enable the pump to withstand higher inlet pressure.