Measuring pumps - Import export

Redundant twin measuring system where there is a requirement for increased operational safety for sewage pumping stations (e.g. main pumping station) in building service engineering and for municipal applications. Product features The twin measuring system MWAS-BN uses two mutually independent measuring systems which work in different ways. The analogue sensor AS for integration in the pump control unit is combined with the pneumatic-mechanical contact sensor system MB. If one of the two measuring systems fails, emergency control is automatically triggered by the other measuring system.

The B2 Battery drum pump is suitable for low-viscosity, aqueous to slightly viscous media, such as plasticisers, cold cleaners and lubricants. The set is suitable for dispensing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources. The set is supplied without battery and charger. * Replaceable, powerful rechargeable battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge empties approx. 12 x 200 litre containers Features & benefits * BLDC motor with high efficiency up to 70% * Infinitely variable * Long battery life * Automatic switch-off in case of overload * Sophisticated quick-release fastener * The max. flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20° C. The measurement is taken at the pump's discharge nozzle, without hose, nozzle or flow meter.

Test gas consisting of 95%N and 5% H2 - Robust hand-held unit with integrated suction pump - Measuring range 1ppm to 1000ppm - Fast response time

The AWALIFT 0/1 requires a space of just 1200 mm x 1200 mm or d=1500 mm. Thanks to its unique design, it can be installed in even non-standard installation areas. A variety of available motor power levels make it suitable for use in a wide range of applications. Multi-family homes Facilities that cannot be drained using natural gradient As protection from backwater damage Product features One tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4

The STRATE AWALIFT 74/1 is used primarily for draining floors, multi-family buildings and properties above the backflow level in accordance with DIN 1986-100, e.g. for properties that cannot be drained via a natural slope. DIN EN12056-4 establishes the upper edge of the street at the connection point to the public sewer system as the backflow level. Two-family homes Facilities that cannot be drained using natural gradient As protection from backwater damage Product features One tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4

The STRATE AWALIFT 100 is the system preferred for draining storeys, houses and plots of land below the backwater level in accordance with DIN 1986-100, i.e. for properties that cannot be drained using natural gradient. DIN EN 12056-4 specifies the backwater level here as being the road surface of the connection point to the public sewage system. Single-family homes (e.g. toilet, shower, bath, sink, washing machine) Basement flat Party rooms in the basement Two-family homes Product features One tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4

for foam, lotion or spray pumps Measurements in mm (W x H x D): 85 x 230 x 105 Wall plate for foam pump, black Wall plate for foam pump, white Wall plate for foam pump, silver

Specially developed for the diverse tasks on the construction site, the Schütz Messtechnik company offers tailor-made measuring tools that reliably and comprehensively support the craftsman in all of his work “all around gas”. The complete solution for the load, leak tightness and usability test on gas pipes can be carried out safely and quickly, including documentation. GDPR-compliant as all personal data is protected against unauthorized access by a PIN. The measurement result can be printed out at the test point on site (optional), fully automatically and without interrupting the system. The professional solution for all measurements according to TRGI The prescribed load tests, tightness tests and usability tests, in the interior installation are possible with just one measuring device With integrated pump for pressure generation Very short measuring time through reference leak measurement PC software included

The GM 5 from Schütz Messtechnik always offers the highest accuracy of results even with changing tasks, since it can be adjusted to the different measuring tasks and environments. The device monitors the intake volume flow and can then adapt to the changed measuring environment and set, monitor and adjust the volume flow. In addition to reliable measurement results, optimal stability and constant response times are achieved. The menu navigation in connection with the automatic measuring range selection makes the GM 5 easy and safe to use by any user at any time. All that is required for commissioning is the selection of a task in the main menu and the measuring device independently sets the sensor selection, measuring range, pump output and alarm message according to specified specifications.

The GM 3100 offers even higher accuracy of results even with changing tasks, since it can be set for different measuring tasks and environments. The device monitors the intake volume flow and can adapt to the changed measuring environment, preset, monitor and the volume flow. In addition to reliable measurement results, optimal stability and constant response times are also achieved. Thanks to the menu navigation in connection with the automatic measuring range selection, the measuring system GM 3100 is easy and safe to use even by an inexperienced user. For commissioning, all you have to do is select a task in the main menu, for example gas detection, and the measuring device then automatically sets the sensor, measuring range, pump output and alarm message according to a defined program.

The GMS 4000 offers even higher accuracy of results even with changing tasks, since it can be adjusted to the different measuring tasks and environments. The device monitors the intake volume flow as well. In addition to reliable measurement results, optimal stability and constant response times are also achieved. The easiest maintenance and maximum accessability because the intelligent measuring sensors can be quickly replaced without configuration problems, if necessary. Thanks to the menu navigation in connection with the automatic measuring range selection, the measuring system GMS 4000 is easy and safe to use even by an inexperienced user. All that is required for commissioning is the selection of a task from the main menu, e.g. gas detection. From there the measuring device sets itself automatically according to a defined program, sensor selection, measuring range, pump output and alarm message.

Innovacera ceramic metering pump is widely used for many famous brand filing machines. We can make customized shapes and sizes of the ceramic filling pump according to clients’ design requests. Product size for reference: Similar Series Products Min Filling Volume: 0.5 ml Similar Series Products Max Filling Volume: 1000 ml Filling accuracy : <=0.5% Product Application: Applicable in quantitative subpackage with high level of hygiene requirement like injection oral liquid etc. Widely applied to pharmaceutical equipment of famous enterprises BOSCH, B+S, IMA, GROENINGER, INOVA company and Trucking Technology, Miaxis, Qianshan, etc.

Silicon Nitride Ceramic Balls are widely used on bearings with extreme performance requirements, such as: High-speed bearings, high precision bearings, vacuum bearing, high / low-temperature bearing, non-magnetic bearing, high precision ball screw; it is also used as valve ball, measuring ball for the chemical pump, heat pumps, metering pumps. Its excellent properties including: Good corrosion resistance withstands attacks from harsh chemicals and environments. High-Temperature Hardness is twice that of steel, Silicon nitride ceramic balls retain their strength and hardness up to 1800 degrees F.Lightweight, silicon nitride ceramic balls’ density is 3.20g/cm3 and weighs 45% less than steel which reduces centrifugal force, skidding and wear under high speed and acceleration, so greatly extending the service life. Superior Surface Finish is conducive to improving working speed and reach higher accuracy.

The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc. The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the application. Features: — differential pressure von 1 mbar bis 20 bar — static pressure bis max. 400 bar — turn-down max. 100:1 — accuracy: 0.075 % FSO — HART®-communication — output signal: linear or square root extraction — aluminium housing Optional Features: — IS-version: Ex ia = intrinsically safe Version (group II) EX ia= intrinsically safe Version for firedamp mines (group I) Ex d = flameproof enclosure (group II) — LC-Display — stainless steeel housing

Maintenance Partners offers training courses on various technical subjects to its customers. Trainings allow you to obtain in-depth knowledge about maintenance of mechanical and electrical rotating equipment. Depending on your specific needs and goals, trainings can also be customized to be more effective. Training Courses AC Motors Balancing Compressors DC Motors Gearboxes Generators Material Analysis Mechanical Measurements Pumps Rewinding Steam Turbines Vibration Measurement & Analysis

Maintenance Partners offers training courses on various technical subjects to its customers. Trainings allow you to obtain in-depth knowledge about maintenance of mechanical and electrical rotating equipment. Depending on your specific needs and goals, trainings can also be customized to be more effective. Training Courses AC Motors Balancing Compressors DC Motors Gearboxes Generators Material Analysis Mechanical Measurements Pumps Rewinding Steam Turbines Vibration Measurement &amp; Analysis Contact Want to now more about the trainings above or how Maintenance Partners can provide a customized training for your personnel?

The OPTISONIC 6300 P is a portable, battery-powered ultrasonic clamp-on flowmeter for temporary flow measurement of (non-)conductive liquids. It can be used at virtually any location and without process interruption or need to cut pipes. Due to its flexibility, the meter is equally suited for comparative measurements on stationary measuring equipment (e.g. pumps, flowmeters etc.) or for use as a short-term replacement of faulty devices. The OPTISONIC 6300 P consists of a combination of one or two clamp-on sensors and one handheld electronic signal converter. The robust clamp-on rail can be easily attached to almost any pipe up to DN1500/160". The readings of the meter are shown on the handheld LCD and are stored in the integrated memory for data logging. In addition, all readings can be transferred to a PC via the included USB stick in order to further analyse or store the data.

LOUPES, VISION & ENDOSCOPY MEDICAL LIGHTS DIAGNOSTICS AUDIOMETRY & RESPIRATORY ECG, MONITORS & ULTR ASOUND FIRST AID - PARAMEDICAL - EMERGENCY STERILIZATION VETERINARY HUMAN ANATOMY - MODELs CAUTERY & ELECTROSURGERY MEDICAL BAGS SCALES & MEASURES FURNITURE PHYSIOTHERAPY - NEBULIZERS - SUCTION PUMPS GYNAECOLOGY & PROCTOLOGY DIAGNOSTIC TESTS - LABORATORY OPERATOR’S PROTECTION HOLLOWARE - SURGICAL INSTRUMENTS HEALTH CARE - PATIENT AIDS

The process meter monitors and displays the analog measured values. Pumps can be monitored with the digital status inputs. The RIA452 can provide power directly to two-wire sensors connected. Up to eight freely programmable relays monitor the measured value. Other operating modes for the relays include sensor or device malfunction, batch and pump control functions. Furthermore, the RIA452 can be used as a preset counter and for measuring flow at open channels and measuring weirs.

Major players in the oil and gas extraction industries rely on Fine Tubes for corrosion resistant tubing to protect their control systems and instrumentation. Custom-Made for Corrosive Oil and Gas Environments Thousands of metres beneath the surface of the sea, our high-quality tubes are deployed in control units for hydraulic pumps, measuring devices, subsea manifolds, and templates. Onshore applications include control panels and topside processing facilities. Please note that we have a minimum order value of £10,000.

Ultramax LI75-24, 24v 78Ah Lithium Iron Phosphate, LiFePO4 Battery. Used for Mobility Scooter, Electric Vehicles, Golf Trolley, Wheelchairs, Lawn mowers, Lights, Toy cars, Sprayers, Photovoltaic, Robots, Communications, Electric tools, Pumps, Measuring instruments, AGV (Automatic guided vehicle), Magnetic lifts, Solar Panel, Motor Homes, Leisure, Caravans. A high-end replacement for heavy users of Sealed lead acid batteries. Dimensions: L(mm) W(mm) H(mm) 480 167 240

12v 200Ah Lithium Iron Phosphate LiFePO4 Battery Used for Mobility Scooter, Electric Vehicles, Golf Trolley, Golf Buggy, Mobility Scooter, electric Wheelchairs, Lawn mowers, Lights, Toy cars, Sprayers, Photovoltaic, Robots, Communications, Electric tools, Pumps, Measuring instruments, AGV (Automatic guided vehicle), Magnetic lifts. A high end replacement for heavy users of Sealed lead acid batteries. Dimensions: L(mm) W(mm) H(mm) 500 225 220. Comes with its own charger: Li Iron/Li Polymer 14.4v 20Ah.

12V 126Ah Lithium Iron Phosphate, LiFePO4 Battery With Bluetooth Monitoring Used for Mobility Scooter, Electric Vehicles, Golf Trolley, Golf Buggy, Mobility Scooter, electric Wheelchairs, Lawn mowers, Lights, Toy cars, Sprayers, Photovoltaic, Robots, Communications, Electric tools, Pumps, Measuring instruments, AGV (Automatic guided vehicle), Magnetic lifts. A high end replacement for heavy users of Sealed lead acid batteries. Dimensions: L(mm) W(mm) H(mm) 325 165 211. Comes with its own charger: Li Iron/Li Polymer 14.4v 10Ah. 126 Amps Maximum continuous current.

12v 100Ah Lithium Iron Phosphate LiFePO4 Battery. Used for Mobility Scooter, Electric Vehicles, Golf Trolley, Golf Buggy, Mobility Scooter, electric Wheelchairs, Lawn mowers, Lights, Toy cars, Sprayers, Photovoltaic, Robots, Communications, Electric tools, Pumps, Measuring instruments, AGV (Automatic guided vehicle), Magnetic lifts. High end replacement for heavy users of Sealed lead acid batteries. Dimensions: L(mm) W(mm) H(mm) 325 165 211. Comes with its own charger: Li Iron/Li Polymer 14.4v 10Ah. 100 Amps Maximum continuous current.

The oxygen pump gauge has been designed to generate and control atmospheres containing oxygen Brand : SETNAG ADVANTAGES Continuous measurement of the generated atmosphere between 10 -35 and 0.25atm Use of different kinds of carrier gases, at various concentrations Limited costs as a single gas is required Very high measurement accuracy: use of the MicroPoas® Low gas consumption: necessary flow 1 to 13 l/h Control of the applied voltage and current Maintenance-free MEASUREMENT TECHNIQUE The oxygen pump set uses the principle of ionic conduction of zirconia. When a continuous voltage is applied across the zirconia tube terminals an oxygen flow is created. The quantity of oxygen in the gas circulating inside the zirconia tube will increase, or decrease, according to how the voltage is applied. The partial pressure is measured by the MicroPoas™. EXAMPLES OF APPLICATIONS Study of reactional mixtures Gen'Air