Off-cuts - Import export

Different knives can be manufactured to fit your products and your machine.

BD 400 is the universal portable electric lift for raising heavy loads safely. Thanks to its unique construction, lifting loads as close as possible to a wall is also possible It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use. Mast with aluminum anti-twist rails Only 2 elements: the elevator and the lifting accessory Immediate use on site, activated in a few seconds without tools 230 V single-phase electric motor with speed variator Possible use in the event of a power outage using the crank provided (or battery-powered screwdriver) Integrated torque limiter, cuts off lifting in case of overload Easy transport on site thanks to transport wheels Stabilizer with adjustable length wheels By design, the feet are placed in front of or behind the mast (for facade work)

The new EWS tcJet range Optimal chip transport thanks to EWS tcJet EWS tcJet transports the coolant through the inset directly to the cutter and guarantees optimal chip transport... At the same time, the cutting edges have a significantly longer service life. EWS's interior cooling version is available for normal and high-pressure applications for various tool holder fixtures and cutting insert manufacturers.

When it comes to a high quality IR Cut filter, it is the substrate with the coating applied that affects the performance. Knight Optical provide high quality wafers for precisely this, and the surface quality of our substrates eliminates blotching at the sensor which occurs on lower quality substrates especially where IR Cut filters are concerned. Our wafers are produced as thin as 500μm & provide exceptional surface quality. However, we can manufacture to a fully customised specification with a wafer thickness as little as 10 μm. Our substrates for stock or custom can be manufactured from a great deal of materials including: •Quartz •Borosilicate •BK7 or equivalent •Sapphire •And many more. Depending on your application for the IR Cut Filter, we can help advise on the best achievable optic for your application. Please read PDF for full specification

Sapphire (Al2O3) is one of the hardest minerals and optical materials available for use in the range from UV up to 5µm. Sapphire is birefringent and if its use is for critical optical application then the crystal might have to be cut along the zero degree plane, or C-Cut. Random cut is usually cut along a plane that is 60° off-axis as the growth in this direction is the easiest to grow. Random cut is anything that is not the C-Cut angle. Sapphire can fluoresce depending upon the concentration of other minerals within the lattice, for example Iron (Fe) or Chromium (Cr). Clear Sapphire might fluoresce orange when illuminated by UV light if impurities are in the crystal. Fluorescent free Sapphire has to be grown from 'pure' feedstock and seed and in an environment that cannot place impurities into the lattice. READ MORE ... CLICK LINK

Your foil and processing requirements determine our knife design. Regardless of whether the foil should be impermeable or permeable, vacuumable or sealable, tearable or much more, they will be cut reliably with the best possible knife.

Diacut cutting discs in diamond and CBN are characterised by a high cutting ability and efficiency in the cutting process.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Hydraulic Grinders and Cut-off Saws

We supply you with electrolytically coated diamond and CBN tools in a high quality finish.

The containers are picked up by the in feed star wheel and transferred to the container table. The container rotation begins when they are positioned between container plates and centering bells. The speed of the feed roller is adjusted to the required label length for continuous web tension. A standard threading unit ensures optimal film feed. In the cutting unit, the labels are precisely cut while a PLC command and servo-motor provide an exact cut-off point. Two narrow strips of hot melt glue the labels together, which are applied by a heated glue roller to the leading and trailing label edges. The label with the glue strip on its leading edge is transferred to the container. This glue strip ensures an exact label positioning and a positive bond. As the container is rotated during label transfer, labels are applied tightly. Gluing of the trailing edge ensures proper bonding. Process: In feed bottle → pre-position →label cutting → gluing → labeling → label by press out → finish

The innovative precision-volume-dispenser eco-PEN700 made by ViscoTec offers a wide range of applications for low to medium-viscosity dispensing. preeflow® eco-PEN is a rotating and perfectly pressure-tight displacement system. Self-sealing rotor/stator design. Conveyance action by medium displacement in the stator through controlled rotor rotation. Safe conveyance without any modification of the medium. With its suck back option, preeflow® ensures clean and controlled material or medium cut-off while preventing post-dripping effects.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

Biofilms consist of a wide variety of raw materials or combinations of raw materials. They have very specific material properties. Knives need to be matched to these properties to produce cuts, serrated cuts, tabs, tear-off aids, etc. And all that with the reliability and speed that produces organic and economical joy.

wireless charging simultaneously when placing a smartphone on XCAN. Easy Pick-up : When electricity cut off, XV-320 opens its wing. FOD : Do not respond light or unnecessary moving while driving Dual Coil : Flip-type smartphones can also be charged wirelessly Android iPhone both compatible [Company Information] CNA CO., Ltd CNA Co., Ltd is a provider of innovative smartphone cradles. The product provides free wireless charging for customers in offline stores like cafeterias and beauty shops. Simultaneously, it shows menus and advertisements on the customers’ smartphones and customers can make secure orders. In addition, at airports and tourist attractions, it can recognize the basis language of each smartphone and thereby provides contents in that particular language. http://cnanfc.com

Flexible Intermediate Bulk Container (FIBC) of the product range Quintainer® offer and efficient way of utilization of room space and an excellent stability during transportation and storage of bulk goods. Forming diagonally and crossed placed cut-off walls increase the stability of Quintainer® considerably. The higher form stability in comparison to the conventional container for bulk goods ensures a better utilization of room space while transport and storage. Quintainer®-FIBC are available for various types of pallets. Fields of application: Packaging of fine-grained and flowable powder of the chemical industry and granules of the synthetic and food industry. Main industries: Products for the agriculture industry, construction industry, chemicals, pharmaceuticals, terrestrial and garden products, wood products and synthetic material, food, disposal of waste, cleaning agents

Carpet Racking utilises adjustable Pallet Racking Frames and Beams in a wide range of configurations to accommodate a wide variety of carpet lengths and roll diameters. Rolls are typically loaded end-on into the Racking system via a specially designed attachment on the fork lift or reach truck. Beam levels can be decked with Chipboard, Timber, MDF etc. to allow smaller carpets and off-cuts to be stored.

Carpet Racking utilises adjustable Pallet Racking Frames and Beams in a wide range of configurations to accommodate a wide variety of carpet lengths and roll diameters. Rolls are typically loaded end-on into the Racking system via a specially designed attachment on the fork lift or reach truck. Beam levels can be decked with Chipboard, Timber, MDF etc. to allow smaller carpets and off-cuts to be stored. Each system is designed on a bespoke basis, but there are similarities in many applications which include vinyl roll and artificial turf roll storage racks providing a good basis from which to start the design process. As manufacturers utilising the very latest production equipment, we can meet all requirements on a cost effective basis to suit individual customers’ needs for all pallet racking solutions.

This series machine is designed and manufactured specifically for the switching industry 2 Automatic feed terminal, loaded terminal / screwing / complete 3. Automatic detection,auto start when there is material, auto cut off when no material detected 4. Automatic counting, set output 5 Using the touch screen, intuitive interface, simple and safe operation 6 Reporting irregular operation and giving the relative solutions in the form of message.