Painting of buildings - Import export

Acrylic copolymer is an emulsion-binding based, matt-looking silicone-doped inner surface topcoat plastic paint. It adheres well to all kinds of wall surfaces, dries early, does not fade, and does not cause cracking and flaking.

Acrylic copolymer is an emulsion-based, matt-looking, economical inner surface topcoat paint. It has dull and smooth appearance. It adheres perfectly to surfaces and does not cause any swelling or flaking. It has high breathing capacity.

Acrylic copolymer is an emulsion-based, textured, thick-grained exterior wall coating material. It adheres very well to surfaces, does not crack and flake, and does not fade. It ensures that the moisture on the wall is expelled with its ability to breathe with its waterproof properties.

Acrylic copolymer is an emulsion-based, silicone-folded, textured, thick-grained exterior wall coating material. It adheres very well to surfaces, does not crack and flake, and does not fade. It ensures that the moisture on the wall is expelled with its ability to breathe with its waterproof properties.

Acrylic copolymer is an emulsion-based, matt-looking, economical inner surface topcoat paint. Spot Plastic Interior Wall Paint, which is matt-looking, adheres well to surfaces, does not crack and flake, has high coverage.

Acrylic copolymer is an emulsion-based, matt-looking, water-based coating material that is applied by spraying methods on inner surfaces and gives decorative texture to ceilings and walls. As it contains high quality additives, it does not crack and flake, and is resistant to water, moisture and impacts. It does not contain substances harmful to the environment and human health and does not contain mold bacteria and germs.

FRONT FACADE is a high-quality facade paint for painting natural and artificial stone, concrete, brick, putty and plastered surfaces when performing facade work. FRONT FACADE can be used to paint plinths (when there are waterproofing, pavement and storm sewers that can minimize long-term static water exposure and capillary effects of moisture rising from the foundation). There is no residual stickiness and low yellowing and dirt retention; Good blocking properties when painting fat-soluble condensates on the surface of the facade. Excellent vapor permeability will ensure rapid transfer of moisture from the base to the environment, which will avoid cracking and destruction of the paintwork in the off-season.

Solvent 0501 PROFI has a soft diluent composition. It does not contain aromatic hydrocarbons. It has a wide range of applications. Dilution of protective and decorative compositions based on natural oils and waxes, as well as dilution of oil, alkyd, bitumen, glyptal, pentaphthalic and phenolic varnishes and enamels (to achieve working viscosity and in case of thickening); Removal of natural oils and oily stains from the working surface and clothes when working with oils; Removing resin stains off the wooden surface; Degreasing various surfaces before painting; Cleaning painting tools for natural oils and waxes application; Dilution of bitumen and silicone rubber mastics; Removal of oil, bitumen and wax smudges; Removal of organic stains off floor coatings (wooden parquet, linoleum, laminate); Removal liquid silicones and silicone oils off various surfaces (household and car polishing compositions).

Solvent 0500 PROFI has a soft diluent composition. It does not contain any aromatic hydrocarbons. It has a wide range of applications. Dilution of protective and decorative compositions based on natural oils and waxes, as well as dilution of oil, alkyd, bitumen, glyptal, pentaphthalic and phenolic varnishes and enamels (to achieve working viscosity and in case of thickening); Removal of natural oils and oily smudges from the working surface and clothes when working with oils; Removing resin stains from the wooden surface; Degreasing various surfaces before painting; Cleaning painting tools for natural oils and waxes application; Dilution of bitumen and silicone rubber mastics; Removal of oil, bitumen and wax smudges; Removing organic stains from floor coatings (wooden parquet, linoleum, laminate); Removing liquid silicones and silicone oils off various surfaces (household and car polishing compositions).

TECHNICAL DEFINITION Extra-fine finishing filler in powder form for all types of interior jobs. The substrate is now ready to be decorated with paint, wallpaper or any wall covering. COMPOSITION AND APPEARANCE Calcium carbonate, redispersible resin, rheological agent and various additives. Produces a white paste. SUITABLE SURFACES • Wallpaper • paint • wall covering • Plasterboards • Concrete • Old paint • Plaster-based high build filler • Plaster blocks • Cement render • Undercoat TECHNICAL CHARACTERISTICS • Setting time : >24hrs (drying filler) • Powder’s density : 0.8 • Grain size : very fine • pH : 7 • Adhesion : complies with standard NFT 30 608 MIXING FACTOR Use approximately 11-12 litres of water for one 25 kg bag. Allow the paste to rest for 15 min before use. APPLICATION Apply either manually with a steel trowel or a putty knife, or mechanically. Allow to harden and scrape off any possible imperfection before sanding down.

Prefabrıcated restaurant buıldıngs are the most suitable for worksite areas, schools or hotels.Prefabrıcated restaurant buıldıngs are preferred because of their price, easy and quick installation and the ability to be disassembled and re-assembled when necessary. The roofs of the prefab restaurant buildings are covered with sandwich panels in accordance with the project. In prefabricated restaurant buildings, necessary paint, electrical and plumbing installations are made and delivered to the customer as a project. With the supply of furniture and technical equipment suitable for the project, it supplies the materials and equipment according to the needs of the customer.

Tried and tested release agent, which is qualified for glueing and welding of structural castings Temperature Range 130 °C to 350 °C Alloy Al, Mg, Zn Properties and Advantages • ideally suitable for conventional as well as micro-/minimal spraying • approved for glueing, welding, painting and powder coating • no build-up • die wetting already at lower temperatures

Waterproof protective water repellent solvent-free and VOC-based. Special siloxanic emulsions in aqueous dispersion. Specified for protection from the beating action of water, alkali and atmospheric agents in general on concrete structures or walls, masonry walls, stones, exposed bricks, fibre cement, tuff, plasters, Plastic and mineral coatings , terracotta, water-paints and all the medium-absorbent building materials in general. Color: Colourless Packaging: Tanica 5-20 LT Usage: Indoor/outdoor Dilution: Ready to use Yield: 2/10 sqm/lt by hand, depending on the absorption of the support Water absorption reduction: ≥ 94%

The reclaimed beams are salvaged from old buildings dating back to the 1800’s. Before sorting, the beams are usually a mixture of old oak, pine, spruce and fir in square shape or hand hewn finish on all 4 sides.We offer large quantities of reclaimed beams that presents a variety of appearances ranging from a rough hand hewn surface to sawn or painted texture. Depending on the building we have demolished, the surface of the old beams will have some degree of character marks which result from nails and bolts we remove. These reclaimed beams usually have a gray or brown surface which can be brushed by our professional machines to result in a mellow brown patina while retaining the circular saw marks.

Preparation is always the key to a successful project, take your time to clean, treat any rust, rub down and mask the area. You will need to purchase a grey primer and apply at least two coats of the primer to ensure optimum adhesion and to give the best finish. When you are ready to apply the paint, build up the colour with several thin coats, rubbing down with wet and dry sandpaper in between coats to ensure a professional finish. For metallic and pearlescent colours it is essential to purchase a lacquer, which will give a high gloss finish to solid colours.

Proguard Fire Retardant Premium Carpet Protection Film is perfect for protecting carpets from spillages and debris during building, painting, DIY projects, house moves, parties and other events to help reduce clean up time. The adhesive backing adheres to most carpets and carpet tiles and ensures that the film stays securely in place, making it safer to use than traditional dust sheets and polythene. After use, it can be peeled away without leaving any residue. The rolls are forward wound meaning the adhesive side is on the inside which makes the rolls perfect for application with our Proguard Film Applicator or by hand. As the adhesive is on the inside it is not exposed to dirt. This carpet film has the added benefit of being fire resistant and anti-slip due to its embossed finish. Roll size: 600mm x 100m Thickness: 65 micron Colour: White

These LPS 1207 certified, fire retardant, semi-translucent plastic sleeves fit any standard size doors and provide cost effective protection from dust, dirt, paint and mortar splashes during building and refurbishment work. Each flame resistant sleeve is sealed on two sides to slip over the door quickly and easily, allowing it to remain fully operational once the sleeve is fitted. The cover also provides a surface for fixing any additional protection materials without causing damage to the doors or leaving any adhesive residue. Sleeve Size: 2200mm x 1000mm

Preventive treatment to partially dampen polluting elements in the air The HT-Aren cyclone is used as a preventive treatment to partially dampen pollution in the air, when you want to limit the powder loads arriving to the filter. It is suitable to separate powder separation generated by biomass combustion. Benefits The HT-Aren cyclone can recover most of the inbound powder by taking advantage of the centrifugal force to which the particles in the air are subjected. An easy to move and specific bin with a 200 l capacity enables accumulation of the separate material. Painted for high temperatures and build to resist up to 250°C. Simple to transport and easy to install. Standard equipment 200 l bin legs/support structure Optionals available construction with special steel continuous unloading with rotary valve suitable for high temperatures rockwool insulation and buffers with aluminium sheets

Tebadul International Trading Company provides the trade services of all construction materials and building requirements including cement, reinforcing steel, paint materials, and all building and cladding accessories and materials for kitchens, bathrooms, and gardens.