Part cleaning - Import export

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

Customized MiJET AC filter for model 30.5 cm Suitable for MiJET 30.5 cm and washing station with MiJET 30.5 cm We have developed the MiJET filter to be able to use it in addition to the oil mist filter. The activated carbon filter is put over the existing air filter. It is fastened with three locking hooks. These keep the active carbon filter in position. The activated carbon filter cannot be used individually. The AC filter helps the user to filter aerosols from the exhaust air. These are increasingly produced by the use of cleaning solutions. MiJET products can be purchased via our Shop.

Custom MiJET activated carbon filter for model 20.3 cm Suitable for MiJET 20.3 cm and washing station with MiJET 20.3 cm We have developed the MiJET filter to be able to use it in addition to the oil mist filter. The activated carbon filter is put over the existing air filter. It is fastened with three locking hooks. These keep the ACF in position. This Filter cannot be used individually. The AC filter helps the user to filter aerosols from the exhaust air. These are increasingly produced by the use of cleaning solutions. MiJET products can be purchased via our Shop.

he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

The ROTIMAT 3U is a universal machine for the cleaning of a wide range of parts. It guarantees maximum technical cleanliness, irrespective of the degree of contamination of the parts. It is equipped with two baths for cleaning, and subsequent iron phosphatising/rinsing, wherby each bath has its own pump cycle. The ROTIMAT 3U can be operated with standard baskets or customised parts carriers. Cleaning with aqueous media (acidic, neutral or alkaline) 660 x 480 x 300 mm 4 x 480 x 320 x 200 mm Spray cleaning for extra demanding applications Catering for wide range of parts Suitable for any cleanliness level from light dirt removal to high technical cleanliness Available as 2bath unit with loading of the unit via Manual loading table Manual charging unit Automatic charging unit

After cleaning, parts are normally dried. Efficient drying keeps cleaning medium consumption low, and thus helps protect the environment. In addition, drying effectively prevents recontamination and corrosion. When drying tightly packed or porous parts, drying at atmospheric pressure might not be effective, so that drying under vacuum is the only option.

The parts are immersed in the wet medium. Dirt is dissolved from the surface by the heated wet medium. By moving the parts while immersed, cleaning is assisted by a mechanical effect. In industrial parts cleaning, the surfaces are then normally rinsed and dried.

The wet medium is sprayed through nozzles onto the surfaces of the parts. Particles are removed from the parts by kinetic energy, and then washed away. The cleaning result is primarily determined by the position and shape of the nozzles, the spray pressure and the volume of media applied to the parts. In industrial parts cleaning, the surfaces are then normally rinsed and dried.

The R0 has been specifically designed for intermediate and final cleaning of small and extra small parts. Thanks to its universal process technology, the R0 offers operators unrivalled cleaning performance in an extra compact machine. The R0 can be transported through door clearances of as little as 1,000 x 2,000 mm. Depending on the model, the cleaning unit can be loaded from the long or from the short side. Cleaning with hydrocarbons or modified alcohols with a flash point > 55°C; halogenated hydrocarbons; other solvents on request Available as UNIVERSAL unit Top quality cleaning in compact unit Short cycle times High throughput Available as 1 and 2bath unit with loading of the unit via Manual charging unit Automatic charging unit

Mobile on floor or in the pit, mounted on a trolley. Grey reinforced fibre glass collector with automatic dirt water recycling incl. drip-off grid with slosh bafflet. Load capacity 80l

Mobile on floor or in the pit, mounted on a trolley. Grey reinforced fibre glass collector with drip-off grid without recycling unit. Load capacity 80l

A professional, payable cleaning and defatting we offer for specially produced Stamping parts Drawing parts Extruded components Turned parts Milled parts Products from electrical engineering and fine mechanics Parts from (electric) motor production Heat exchanging devices An optimal cleanliness of the elements has found its way to become an important quality characteristic. By our professional procedure of cleaning parts your stamping parts will be optimally defatted and residue-free dried. We are sure, that you will love the clean final products. Our cleaning plant is an up-to-date version and works in vacuo with DOWCLENE 1601 (based on modifies alcohol). The pros lower toxicity residue-free drying, non-detergent

Spray washing: automatic cleaning For companies, manual cleaning of parts is a time-consuming activity. The Laborex spray washing machines ensure the automatic cleaning, rinsing, degreasing and drying of industrial parts made of metal or plastic. This way you can carry out other work without any worries while your parts are automatically cleaned. Test our rotating spray washing machines yourself We would like to invite you to come and test our rotating spray washing machines in our showroom. This is completely free and without obligation. Make your appointment now. Ideal solution for external cleaning of parts The Laborex rotating spray washing machines are the ideal solution for the external cleaning of parts. The spray washing principle is simple: you place the parts to be cleaned in the basket and select a washing program.

DOLFİN- KBN2 series parts washing machines are especially used for washing parts that require rinsing, passivation or other processes after washing, as well as large and heavy parts. While it is desired that there is no oil and other impurities on the surface before assembly or packaging in enterprises and factories that produce parts in series, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part depending on the place of use of the part. For this requirement, a 2nd stage rinsing or a similar application is mandatory. Our KBN 2 series part washing devices are a special device containing more than 1 tank and/or bath. The parts placed in the device are rotated on its own axis by means of the washing basket, while pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the part is cleaned.

DOLFİN-KBN1 series parts washing machines are used before and after overhaul in repair and maintenance services, especially for washing large and heavy parts. Apart from revision workshops, it is also used for cleaning the surfaces before assembly or packaging in enterprises and factories that produce parts in series. They are special devices designed for large sized and heavy parts such as engines and parts of construction machines, power plant turbines. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned.

"DOLFİN- LYM2 series parts washing machines are industrial purpose parts cleaning devices used especially in repair and maintenance services before and after overhaul. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned. Since Dolfin parts washing machines work in a closed cycle, new water and new detergent are not used each time. When washing repeatedly with the same tank, all pollution remains in the washing cell. Thanks to this feature, it protects both nature and labour. Thanks to its high efficiency and performance, it saves energy, water and labour. It works automatically in accordance with the temperature and time values set during use.

DOLFİN- LYM1 series parts washing machines are industrial purpose parts cleaning devices used especially in repair and maintenance services before and after overhaul. While the parts placed in the device are rotated on its own axis by means of the washing basket, pressurised detergent hot water is sprayed. Thanks to the pressure, temperature and chemical effect, all oil and dirt on the parts are cleaned. Since Dolfin parts washing machines work in a closed cycle, new water and new detergent are not used each time. When washing repeatedly with the same tank, all pollution remains in the washing cell. Thanks to this feature, it protects both nature and labour. Thanks to its high efficiency and performance, it saves energy, water and labour. It works automatically in line with the temperature and time values set during use.

DOLFİN- VDL series Drum (Spiral) parts washing machines are used especially for cleaning small parts with high production quantities and produced in bulk. The materials poured from the inlet part of the spiralised drum in the device are directed towards the outlet part of the drum by the spirals inside the drum. While the drum moves on its own axis according to the set rotation speed, the parts are subjected to washing (degreasing), rinsing, passivation and drying processes respectively (depending on the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively in a single device. Full penetration is achieved by pressurised spraying and immersion effects in each section. It is a very functional model used especially for washing bolts, nuts, washers, or small parts of this type, and fittings, nipples, couplings and fittings processed in high quantities on cnc and automat machines.

"DOLFİN- VDL series Drum (Spiral) parts washing machines are used especially for cleaning small parts with high production quantities and produced in bulk. The materials poured from the inlet part of the spiralised drum in the device are directed towards the outlet part of the drum by the spirals inside the drum. While the drum moves on its own axis according to the set rotation speed, the parts are subjected to washing (degreasing), rinsing, passivation and drying processes respectively (depending on the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively in a single device. Full penetration is achieved by pressurised spraying and immersion effects in each section. It is a very functional model used especially for washing bolts, nuts, washers, or small parts of this type, and fittings, nipples, couplings and fittings processed in high quantities on cnc and automat machines.

Dolfin RTS series Rotational basket washing machines, washing small and complex surfaces It is a compact parts washing machine used for precise and high-level cleaning of problematic part types. The parts that are placed in the washing basket one by one by positioning and / or in bulk are first sprayed with alkaline chemical washing liquid at high pressure to every point of the parts in the device. Then the washing cell is filled with this liquid and the parts are contacted with ultrasonic sound waves. Therefore, thin section detail points, internal holes and channels are cleaned at a high level. In the process, the basket is rotated on the vertical axis and both spraying and ultrasonic effect is penetrated to every point of the part. At the end of this process, the washing liquid is directed to its own tank, while the same process is applied for rinsing and/or liquids in the other tank.

Dolfin KNV series conveyor belt washing machines are parts washing machines used for washing parts produced in series in large quantities. The parts placed at the entry point are moved towards the exit point of the device by means of the conveyor. The parts guided on the conveyor line are washed with high pressure, pre-washing, washing, rinsing, spraying with passivation liquids. At the end of the cleaning process, these parts are dried with pressurised hot air and discharged at the exit point. If desired, it can be integrated into production processes and robotic loading and unloading options are also available. While the entire device is fully automatic, all washing details are parametric. Cleaning is provided at any desired level by means of spray nozzles specially designed according to the part geometry.

Parts are cleaned, rust removed, rinsed, phosphatized and dryed in conveyor bent tunnel w ashing machines, all these applications are nonmanuel. When the parts are moved into the machine, they exposed all these operations and moved out. These conveyor bants are 304 or 316 quality stanless steel components. Speed of the conveyor is controlled digitally. Circulation pumps are very good degisned parts. Heating system can be optianlly electric, cell cored or burneroperated. Isolation is very sensitively handled for the energy saving. PLC containing systems can be controlled from operation panel. Our all machines contain automatic water feeding and liquid level control systems.