Pipe connector - Import export

Stainless steel pipe connectors and ball joints are used for quick dismantling of two pipes. The ball joints offer the additional advantage of attaching the pipes at a special angle.

3-way pipe connector, machined, T-Stück, material: cast steel for quenching and tempering, G17Mn5

For the 2N pipe connector, the pipe is placed against the inner edge of the connector and a sealing ring seals off the connection. A cutting ring wedges into the flexible tube or pipe as far as the knurled nut is screwed onto the connector body, thereby fixing the connection in place. This creates a friction-locked and tight pipe connection that can be released at any time, that eliminates dead volume in the design concept and also has no effect on the flow. The inside diameter of the connector does not correspond to the inside diameter of the pipe.

The pipe or tube of the 2T pipe connector is inserted through the connector as required for bead tubes, immersion tubes, thermometers or sensors, etc. It consists of a sealing cone which is pushed into the matching inner cone of the connector and acts as a bushing for the pipe while performing a sealing function. An additional O-ring, which is protected from damage by a pressure disc, holds the pipe in place and prevents it from being pulled out accidentally.

The pipe or tube of the 2D pipe connector is inserted through the connector as required for bead tubes, immersion tubes, thermometers or sensors, etc. The pipe is placed against the inner edge of the connector and a sealing ring seals off the connection. A cutting ring wedges into the flexible tube or pipe as far as the knurled nut is screwed onto the connector body, thereby fixing the connection in place.

Clamping connector / screw connector with fixed support tube for optimum grip and durability. With our flexible all-rounder you can always rely on the right connector in the water, gas, heating and local / district heating sector. Our connectors are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The connector consists of only three components and thus allows quick and easy installation without special tools. The support tube firmly connected to the main body brings the plastic tube into an exactly round shape and supports it towards the outside, meaning it maintains the internal pressure against the brass clamping ring of the connector. Even with negative pressure no pipe deformation occurs. Due to its special contour, the fixed support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 16mm - 75mm Thread sizes: 3/8 "- 2 1/2"

Plug-in connector for drinking water, water and gas. The material-friendly connecting technique enables that the pipe is only stressed as the relations of pression and torsion demand. Premature wear due to overstressing of material and subsequent troublescan be excluded. The metal clamping claw enables a torsion-free assembly by its positioning. The connector can easiliy be dismounted – all components can be reused without problems. For the application in the field of gas the connector has an additional insert pipe to stabilise the pipe. For the application in the field of drinking water the connector has the proven EPDM profile gasket which reliably seals minor damages on the surface. The plug-in connectors for the application in the fields of water and gas additionally have a special o-ring. The sealing and clamping functions are separated and independent which makes the connector extraordinarily safe.

Clamping connector / screw connector with fixed support tube for optimum grip and durability. With our flexible all-rounder you can always rely on the right connector in the water, gas, heating and local / district heating sector. Our connectors are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The connector consists of only three components and thus allows quick and easy installation without special tools. The support tube firmly connected to the main body brings the plastic tube into an exactly round shape and supports it towards the outside, meaning it maintains the internal pressure against the brass clamping ring of the connector. Even with negative pressure no pipe deformation occurs. Due to its special contour, the fixed support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 25mm - 63mm Thread sizes: 1/2 "- 1 1/2"

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 110mm Thread sizes: 2" - 4"

Clamping connector / screw connector without support tube for optimum grip and durability. The product group A3 is just right for anyone who wants to work fast, cost-effective and space-saving. The separate sealing and clamping function results in a clear division of functions. additionally allows the pressure-dependent clamping force that adjust the pressure loads in the application individually. The connector consists of only three components and thus allows a quick and easy Assembly without special tools. The latest state of the art makes it possible to access a support tube without. Thus, only one connector is required for each pipe outside diameter, pipe wall thicknesses are no longer an issue. For use with PVC pipes, a brass clamping set is used.

With BEULCO BlackLine® the next generation of plastic connectors has emerged. Function and material are aligned in a way that highest possible safety and best comfort are given during installation. The connectors are made of extremely resistant high performance material (PP and POM). It is characterized by high strength and hardness in a wide range of temperatures. Additional features as the high heat resistance, a low friction coefficient and a minor water absorption make the material coparable to metal. It is resistant against UV, chemicals and corrosion.

With our fl exible all-rounder you can rely on water, gas, heating and district heating always on the right angle piece. Our elbow handpieces are suitable for drinking water hygiene Material manufactured and are therefore optmal for use in the drinking water sector. Our elbow handpieces are made of thermally relaxed brass. All drinking water-contacting components consist of high quality UBA compliant material. The material is hygienically hygienic suitable and complies with the legal requirements (Drinking Water Ordinance, UBA list). The reliable one brass material ensures a special longevity. The model is available in different versions. Pipe diameter: 16mm - 75mm Thread sizes: 3/8 "- 2 1/2"

With our fl exible all-rounder you can rely on water, gas, heating and district heating always on the right angle piece. Our elbow handpieces are suitable for drinking water hygiene Material manufactured and are therefore optmal for use in the drinking water sector. Our elbow handpieces are made of thermally relaxed brass. All drinking water-contacting components consist of high quality UBA compliant material. The material is hygienically hygienic suitable and complies with the legal requirements (Drinking Water Ordinance, UBA list). The reliable one brass material ensures a special longevity. The model is available in different versions. Pipe diameter: 20mm - 75mm Thread sizes: 1/2 "- 2 1/2"

With our coupling for plastic pipes you can always rely on the right coupling in the water, gas, heating and local / district heating sector. Our couplings are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The coupling consists of only three components and thus enables quick and easy installation without special tools. The model is available in different versions. Pipe diameter: 12mm - 75mm

Clamping connector / screw connector with fixed support tube for optimum grip and durability. With our flexible all-rounder you can always rely on the right connector in the water, gas, heating and local / district heating sector. Our connectors are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The connector consists of only three components and thus allows quick and easy installation without special tools. The support tube firmly connected to the main body brings the plastic tube into an exactly round shape and supports it towards the outside, meaning it maintains the internal pressure against the brass clamping ring of the connector. Even with negative pressure no pipe deformation occurs. Due to its special contour, the fixed support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 13mm - 50mm Thread sizes: 1/2" - 2"

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 110mm Thread sizes: 2" - 4"

Clamping connector / screw connector with welded socket for optimum grip and durability. With our flexible all-rounder you can always rely on the right connector in the water, gas, heating and local / district heating sector. Our connectors are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The connector consists of only three components and thus allows quick and easy installation without special tools. The support tube firmly connected to the main body brings the plastic tube into an exactly round shape and supports it towards the outside, meaning it maintains the internal pressure against the brass clamping ring of the connector. Even with negative pressure no pipe deformation occurs. Due to its special contour, the fixed support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 25mm - 110mm Thread sizes: 3/4" - 4"

Clamping connector / screw connector with fixed support tube for optimum grip and durability. With our flexible all-rounder you can always rely on the right connector in the water, gas, heating and local / district heating sector. Our connectors are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The connector consists of only three components and thus allows quick and easy installation without special tools. The support tube firmly connected to the main body brings the plastic tube into an exactly round shape and supports it towards the outside, meaning it maintains the internal pressure against the brass clamping ring of the connector. Even with negative pressure no pipe deformation occurs. Due to its special contour, the fixed support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 16mm - 75mm Thread sizes: 3/8 "- 2 1/2"

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 75mm Thread sizes: 2 1/2" - 3"

Flange connector with loose insert pipe for optimum grip and durability. Our flange connectors are optimal for higher dimensions. They have an additional seal and a loose insert pipe. With our flange connectors for the application in water systems you are always on the safe side. The connector consists of various components, which can be assembled quick and simple without any special tool. The fixed insert pipe ensures an optimal form of the PE Pipe and stabilizes the pipe inwards, so the insert pipe holds up internal pressure. The additional seals ensure total security. The model is available in different versions. Pipe diameter: 63mm - 110mm Thread sizes: 1 1/2" - 3"

Clamping connector / screw connector with fixed support tube for optimum grip and durability. With our flexible all-rounder you can always rely on the right connector in the water, gas, heating and local / district heating sector. Our connectors are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The connector consists of only three components and thus allows quick and easy installation without special tools. The support tube firmly connected to the main body brings the plastic tube into an exactly round shape and supports it towards the outside, meaning it maintains the internal pressure against the brass clamping ring of the connector. Even with negative pressure no pipe deformation occurs. Due to its special contour, the fixed support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 13mm - 50mm Thread sizes: 1/2" - 2"

Clamping connector / screw connector with fixed support tube for optimum grip and durability. With our flexible all-rounder you can always rely on the right connector in the water, gas, heating and local / district heating sector. Our connectors are made of water-hygienic suitable material and are therefore ideal for use in the drinking water sector. The connector consists of only three components and thus allows quick and easy installation without special tools. The support tube firmly connected to the main body brings the plastic tube into an exactly round shape and supports it towards the outside, meaning it maintains the internal pressure against the brass clamping ring of the connector. Even with negative pressure no pipe deformation occurs. Due to its special contour, the fixed support tube also ensures the sealing function. The model is available in different versions. Pipe diameter: 25mm - 50mm Thread sizes: 3/8" - 1 1/4"

Hose connectors and pipe connectors are used where permanent and fixed connections are required. They are used for extending, diverting or repairing lines and guarantee a tight connection. Here you will find quick-connect fittings, quick screw fittings, hose screwed fittings, hose connection parts and cutting ring fittings. All mentioned hose and pipe connectors are available in various sizes, materials, and pressure and temperature ranges.

Hose connectors and pipe connectors are used where permanent and fixed connections are required. They are used for extending, diverting or repairing lines and guarantee a tight connection. Here you will find quick-connect fittings, quick screw fittings, hose screwed fittings, hose connection parts and cutting ring fittings. All mentioned hose and pipe connectors are available in various sizes, materials, and pressure and temperature ranges.