• Europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • pipes and tubes - ferrous metal

Results for

Pipes and tubes - ferrous metal - Import export

Germany

Verified by Europages badge

Fewer steps to the finished workpiece With t project you can see all the variables of the bending process before you start the production. Adapted to the material and collisionfree, it makes it possible to plan and execute complex bending geometries. The virtual bending simulation determines exact bending timings and cutting lengths; it also tests tube geometries in advance for feasibility. Tube data and bending results are documented with accuracy and they can then be replicated 100% . All the most common interfaces are available for the import and export of data and connection to BDE or ERP over the network.

Germany

Verified by Europages badge

Labelling systems can be integrated, whether it is laser, needle or inkjet, to mark and identify the tubes. Other options that can be integrated are welding seam detection, length control or measurement of processed tubes. The corresponding sensor and camera technology can be implemented for the specific product. The following step can be carried out without any problems, whether it is cutting, punching, deburring of holes or seal testing with external systems. Smart data evaluation All the systems can be equipped with different control and IPC panels. Interfaces to data caption systems for consumption and operation make the digitalization and evaluation of the data. Marking system, Welding seam detection, Camera control system, Internal and external cleaning processes, Cleaning and suction, Hole punching, Deburring – chamfering

Germany

Verified by Europages badge

The right system for every need There is a great variety of handling systems available, dependent on the length of the workpiece. For short tubes there are systems gripping from below with insertion axis and for long tubes there are systems handling from above. Both options can be used in our combination systems. They guarantee ideal access for the operator, so they can complete the setup and any maintenance operations in the best possible way. Transfer stations, turning modules for processing the tube in both directions within an installation and multiple grippers are available for optimized processes. Handling robots from many different manufacturers can also be integrated. The robots are used to move tubes/workpieces. A preassembly of different workpieces is also feasible in this case. The various components can be sorted using sensors and robots.

Germany

Verified by Europages badge

We offer a great variety of loading systems for all the machines, dependent on the material, tube diameter and tube length. Tubes that have already been formed and with added components can also be loaded without any issues. The appropriate orientation is therefore very important, when loading the tube into the production cell. External workpieces, such as nuts, flanges, supporting sleeves can be added to the system in a controlled manner and included in any subsequent processing steps. A great variety of loading volumes is possible. Step feeder, Conveyor feeder, Chain feeder, Swivel arm feeder, Loading tables, Bowl feeder, Alignment station

Germany

Verified by Europages badge

Clean, efficient, versatile. transfluid's knife cutting method is ideal for postbending cuts. Even with extreme geometries it is possible to have perpendicular cuts with sharp edges. In both cases both chips can easily be detected in the process. Extreme requirements are also not a problem, as up to two blades can be used. An internal mandrel can also optimise the process.

Germany

Verified by Europages badge

Created for precision. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can then be directly processed further and for instance be formed straight afterwards. That saves time and money.

Germany

Verified by Europages badge

In form, double strength. For the optimum processing of your individual requirements we simply combine our transfluid forming techniques, as simple as that, in particular the axial forming and the rollforming. The additional clamping unit makes even extreme forming feasible in one work sequence. The cutting before the axial tube forming is also possible, as well as the rollforming of a preformed geometry. That saves you valuable time. A strong partnership axial forming and rollforming. Our t form combination machines is the perfect union of axial and rolling tube processing, with up to 6 axial forming steps, two rollforming stations, two powered tool holders for flange orientation and an additional clamping unit. The horizontal clamping system makes the processing of bent tube geometries possible.

Germany

Verified by Europages badge

Powerful and fast forming. The type UMR tube forming machine uses smart operating technology with many preset settings that can be retrieved automatically to achieve perfect mirrorlike surfaces. When producing flaring with 20°90° angles, with a clamping length of 1 x D, the machine achieves perfect sealing surfaces. Flaring up to 90° can be produced in a single cycle. Tools can be changed extremely quickly. With the appropriate tools the machine can also close tube ends.

Germany

Verified by Europages badge

All the options in one single machine forming, cutting, postbending cutting, threading. Our rotational technology increase the possibilities of forming on tubes with minimal expenditure on tools. All the drives are servoelectric by design and, if needed, CNCoperated. In our SRM typeforming machines, all the settings are preloaded, so there is no longer any need for costly adjustments. Different tool variants further expand the processing possibilities for chipless cutting or postbending cutting. The machines can produce internal and external profiles and can also roll in synchronicity thanks to a special tool head (inside/outside).

Germany

Verified by Europages badge

Accurate forming with fast tool change. Our type REB axial t form forming machines, with their compression power of up to 1,300 kN are particularly wellsuited to effortlessly master complex geometries. With up to 6 forming steps in combination with an additional clamping unit they will satisfy almost all requirements. The operation is simple and intuitive with a touch panel. The sequence control makes each separate movement of the respective forming step userfriendly and fully programmable individually. We offer the option to equip our systems with electric or hydraulicnumerical drives. These forming processes can be completed stepwise in transfer system to achieve very short cycle times. Simultaneous axis movements ensure fast production processes and an efficient and highly dynamic production.

Germany

Verified by Europages badge

Maximum bending freedom. The robotic bending technology combines the greatest versatility in manufacturing steps and simple handling. The robotic head is equipped with a clockwise and counterclockwise bending head, so that bending can happen in both direction once clamped. The eight synchronized and fully electric axes give maximum versatility when processing tubes. The bending process on tubes, including the processing at the ends and addon component can be done without any problems. The addon components can be positioned automatically, if needed. A radii/plane changer with up to 6 tools per bending system is integrated to give maximum flexibility..

Germany

Verified by Europages badge

We have developed these t bend machine solutions strong> for fast and efficient processing times. They are specifically tailored to the challenges of individual bends. Whether the system is manual or automated, they will deliver the best possible results. Highly efficient This manufacturing accelerator offers the profitable efficiency of our high performance bending machines for the manufacturing of hydraulics fittings together with Top Speed that is what the "AB" series stands for. For individual bends from 1xD to 1,500 mm bending radius for small and large radii, for demanding materials with thin walls, the high performance (HP) machine series guarantees the perfect bending result.

Germany

Verified by Europages badge

Stable, flexible and economical. This series will win you over with its special stability and performance. Individual pieces and small series can be produced in an extremely economical manner with this machine concept. The use of highvalue components ensure the machine's durability.

Germany

Verified by Europages badge

For better efficiency. The electric axes can be programmed in synchronicity to give optimum cycle times.Tools for bending on multiple levels with automated tool change makes it possible to achieve various radii and the most extreme geometries on tubes. With our clockwise/counterclockwise bending machines – also available with push bending function – the most complex bends become reality with great accuracy.

Germany

Verified by Europages badge

Compact and very efficient. Our fully hydraulic mandrel bending machine delivers outstanding bend quality and very simple handling, with SPS control for preselection and storage of bending angles via a touch panel.

Germany

Verified by Europages badge

The smart companion for many different sites a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality.

Germany

Verified by Europages badge

Caps and stampings we can deliver the most diverse materials. Size, type and form are in this case matched to the customer's wishes and are manufactured according to customer drawings. Sit down just contact us and we will help you in designing a suitable product for your needs. Tubes and tube sections By combining different materials, the applications are widely held. These range from the electrical insulation of components of chemical protection through to thermal protection elements and cables. Depending on customer requirements, our tubes and cores are already manufactured to the desired level and then shipped as cargo.

Do you sell or make similar products?

Sign up to EUROPAGES and have your products listed

Add my business

Austria

Verified by Europages badge

Tubes made of molybdenum are available in the Plansee Online Shop. Tubes are available in different lengths and diameters from 0,381 up to 1,52 mm. Order fast and easily from the producer's online shop: www.plansee.com/shop

Italy

Verified by Europages badge

Brass, zinc-coated and PVC fittings.

Switzerland

Best applicable for use in hygienic or aseptic pipes and containers or tanks even with very small immersion lengths. It meets increased protection requirements of the temperature sensor regarding physical and chemical effects. Ideally suited to all measuring points that require regular recalibration by simply replacing the insert in closed processes.

United Kingdom

Our state-of-the-art fibre laser provides you an unprecedented level of freedom in design. Capable of processing tube and box material in varying aluminium, stainless steel and titanium grades and thicknesses. Our laser service provides you with a wealth of new options to consider. As an All-In-One Solution, our laser can do more than just cut material. The laser can implement multiple functions in a single operation, including: cutting, drilling, notching and etching. What once would have taken hours and multiple operations and personnel, now only takes seconds with the help of our friendly Laser Operators, Adrian and Martin. Opposed to traditional cutting methods, laser machines do not require contact upon cutting, -minimising contamination and unwanted marking to the material. When paired with the internal suction probe (more commonly known as “the spoon”), we can produce a final product to a higher standard of finish both in terms of cleanliness and aesthetically.

Romania

dimensional range: DN 1’’ ÷ 40’’ materials: quality carbon stainless steel (OL37, A105, P285NH, P285QH, W4541, 316L, 304L)

United Kingdom

We offer a comprehensive range of super mirror marine polished stainless steel tube in grade 316 (1.4401). The size range covers tubes from ½” (12.70mm) – 2.1/2” (63.50mm) with a 16 gauge (1.6mm) wall thickness. Suitable for marine environments and high-chloride exposure.

Russia

Without bolts and fully assembled at the factory monolithic carbon-stainless steel adapters installed during the ground-to-air transition and connects pipelines of various steel grades

Russia

NEMS electrical insulation insert is a one-piece pipe product serves to protect the pipeline from electrochemical corrosion in areas affected by stray currents. Installed -at the boundaries of sections of electrochemical protection of pipelines -on the borders of property plots -at the boundaries of pipeline sections with different types and quality of protective coatings or a significant change in the specific electrical resistance of the soil -for electrical separation of aboveground sections of pipelines with a length of more than 1000 m from underground sections -a method for identifying pipeline sections that are affected by stray currents, as well as inductive AC guidance -at integrated gas and oil treatment plants, booster compressor stations or tank farms Advantages -Withstand heavy mechanical loads -The service life corresponds to the service life of the gas pipeline -Installed on all categories of gas pipelines -Operating temperature +150 C and above

Germany

Verified by Europages badge

Elbows and connections made of steel and stainless steel for oil, gasoline and air hose lines. The connections are pressed onto the assembled hose.

Germany

Verified by Europages badge

Super lightweight reusable dash aluminum fittings. Manufactured according to aviation standards, suitable for petrol, oil, methanol, water and air. The first choice when it comes to reliable and flexible hose lines.

France

Verified by Europages badge

Standards : EN 1092-1, DIN, ANSI B16.5 Dimension : DN15-DN600, 1/2"-24" Pression : PN2.5-PN160, 150Lbs-2500Lbs Material :Acier Carbonne, Allié, Inoxydable, Duplex & Super Duplex et autres…

France

Verified by Europages badge

Standards : EN 1092-1, ANSI B16.5, ASME B16.47 Dimension : DN15-DN2000, 1/2"-60" Pression : PN10-PN400, 150Lbs-2500Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…