Pneumatic system components - Import export

Monitor the quality in your extrusion line, fiber production, polymer production or food and chemical production continuously in real time with the Promix Visco-P inline viscosity meter. Prevent scrap production and reduce raw material costs through active raw material management. Promix Visco-P is a true online rheometer that helps you monitor your production process and save production costs. Ask for a test unit and see for yourself! Advantages Promix Visco-P inline viscosity measurement ,Continuous monitoring of raw material quality and process conditions in real time ,Raw material cost reduction through active raw material management ,Precise inline viscosity measurement in the melt stream – without bypass ,Suitable for all viscous media ,Additional benefit of melt and temperature homogenization in the Promix melt blender, which also serves as a measuring section ,Can be integrated into any extrusion line ,Test units available

Insufficient surface quality, long cooling times, uneven thickness tolerances or other quality problems often limit maximum production output. Promix melt blenders eliminate these limitations sustainably and lead to significant cost savings. Would you like to optimize your extrusion process? Improved melt homogeneity and a more uniform melt temperature create tighter thickness tolerances and better surface quality. And quite often, it can also increase production throughput. Promix offers you highly effective static mixers and melt blenders at low investment costs. They are supplied ready for installation, including heater bands and holes for pressure and temperature sensors. The melt blenders are usually installed downstream of the screen changer & gear pump, and upstream of the die. The very short installation length allows easy retrofitting in existing extrusion lines.

Mixing nozzles and static mixers from Promix ensure excellent melt homogeneity and efficiently prevent color streaks or flow lines. Quality problems in injection molding are often solved by modifying the process parameters. Masterbatch concentration and back pressure must be increased, which makes production costs more expensive. This does not have to be the case! Mixing Nozzles from Promix ensure excellent melt homogeneity. Color streaks or irregularly distributed additives in the component are a thing of the past. The ready-to-connect mixing nozzle is installed on the injection molding machine replacing the standard nozzle. Contact us for a mixing nozzle to test.

Promix specializes in demanding cooling and heat exchanger tasks such as cooling and heating of viscous or decomposition-sensitive media / plastic melts. The Promix P1 heat exchanger is the unique combination of a very efficient static mixer and a powerful cooler. The novel patented technology opens up completely new process engineering possibilities in the cooling and heating of plastic melts and other viscous fluids. The simultaneous mixing and cooling processes in the P1 allow for very efficient cooling and heating without the formation of deposits or the risk of product decomposition. Advantages Promix P1 heat exchanger Very efficient cooling of polymer melts close to the solidification point Precise temperature control and uniform temperature distribution at the outlet Very robust construction Extremely gentle cooling and heating of residence time critical fluids Unique self-cleaning behavior Reliably scalable from laboratory test to production scale Test options

The Procell nucleation additives developed by Promix are specially adapted to the Microcell foam extrusion of plastic melts. They lead to microcellular foam structures, a key factor for high mechanical strength of the foamed product. Homogeneous, very fine-cell foam structures are the key to high mechanical strength. Promix has developed specific Procell nucleation additives. These are specially adapted to the Promix Microcell foam technology and lead to microcellular foam structures. The additives can be used in foam extrusion and light foam extrusion for many polymers such as PP, PET, PE, PS, ABS, PLA and are suitable for food contact applications. Contact us for a test sample.

Microcell foam extrusion systems from Promix are used for a wide variety of applications and for almost all polymers. Thanks to the production of very homogeneous microcellular foam structures, high-quality foam products with very low densities and excellent mechanical properties can be produced. Physical foaming can reduce material consumption and thus costs by an average of 20%. This not only saves money but also has a positive impact on the environment. Promix Foam extrusion systems set standards in the production of microcellular foam products with very homogeneous cell structure and high process consistency. The systems operate with environmentally friendly blowing fluids nitrogen or CO2 and are easy to integrate into existing or new extrusion lines. Depending on the application, density reductions of 5 to over 70 % can be achieved.The technology can be used for packaging films, sheets, foam core and corrugated pipes as wellas profiles, cable sheating, blow molds and blown films.

Manual override and stroke limits for pneumatic piston and diaphragm actuators.

Promix gas dosing stations for physical foaming have been specially designed and developed to meet the needs of foam extrusion. Promix gas metering technology is characterized by high dosing accuracy, reliability and amazingly simple operation. Promix gas dosing stations meet all the requirements of a modern gas metering system for foam extrusion. These include high-precision mass flow control, process visualization by means of trend charts, operator-definable operating limits, data acquisition, and synchronization of the dosing rate with the extruder output. Implementation in the extruder control system via fieldbus system is also possible. •,Mass flow from 1 g/h up to 20'000 g/h •,Dosing pressure up to 680 bar

Promix supplies key components to optimize the production of light foams such as XPS insulation boards, XPET construction boards, XPE foam films, etc. Thanks to the improved cell structure, the foam density can be further reduced, and the throughput of the plant increased, resulting in significant cost savings in production. Replacement of iso-butane for the sake of the environment Iso-butane and other hydrocarbons are excellent blowing agents for high expansion foam production.However, they are also highly harmful to the environment and highly flammable, which increases the production risk. Promix gas dosing stations in combination with other retrofittable process engineering components enable at least a partial switch to the non-flammable and environmentally neutral gases CO2 and nitrogen. Your optimization potential ,Improved mechanical product properties ,Lower foam density ,Replacement of hydrocarbon blowing agents with CO2 and nitrogen ,Increased line throughput

Go-Scan C-view is a light weight ruggedized real time X-ray imaging system specifically designed for hand-held inspection such, among other, Corrosion Under Insulation (CUI) inspection. It includes a high speed and high resolution CMOS imager and a battery-operated 70kV x-ray tube designed for portable field operation. The video imaging system captures images and displays them on a hand held display in real-time.

X-RAY GENERATOR, DETECTOR, AND SOFTWARE IN ONE BUNDLE! Discover our complete range of portable X-ray systems for NDT inspections. Fully developed in-house, these packages combine a detector, an X-ray generator, and Sherlock NDT, a state-of-the-art and user-friendly NDT inspection software. Paired with Teledyne ICM’s X-Ray generators (CP Series or CP Batteries), the GO-SCAN’s detectors deliver a sharp, clear, and detailed image and can reveal a very large majority of defects such as cracks, corrosion and failing welds. Sherlock NDT, Teledyne ICM’s NDT inspection software is fully compatible with Teledyne ICM’s complete range of portable X-ray generators. It is the perfect tool for industrial radiography, allowing compliancy with most quality standards. The intuitive and user-friendly touchscreen software produces high-quality images, allows real-time (video) acquisition, and comes with many different enhancement features.

For light grinding, polishing and milling work. Length: 1.500 mm Shaft core Ø: 6 mm max. Speed: 30.000 rpm Connection to Machine: M10 x 30 threaded Connection Connection to handpiece: square small (5mm)

The Modular Tooling Systems for Transfer Presses consist of arms and pneumatic clamps, these clamps allow the gripping of the sheet metal pieces for their movement to the subsequent work phases. It is also possible to use compensation slides or groups of actuators to realize auxiliary movements on the transfer lines. A simple design, a fast assembly and a rapid development can be achieved by using modular components, such as terminals of various types, extensions, joints and regulation elements. Two types of Brackets can be used for the junctions. The first type consists of friction brackets with open rings that are tightened by appropriate screws. These brackets can move along a tube, hence, the adjustment of the position can be done either along the axis of the tube or angularly. The second type of bracket consists of gear brackets that can fit any requirement thanks to an Exclusive Modular System. With only 8 pieces it is possible to reach unlimited combinations.

Air couplers are essential components in pneumatic systems that provide a safe and reliable connection between various air tools and hoses. They work by allowing compressed air to flow through different components of the system, enabling the tools to function efficiently. Anyone who uses pneumatic tools regularly, such as mechanics, construction workers, or DIY enthusiasts, will undoubtedly need air couplers to keep their system running. Keeping this importance in mind, we have designed and manufactured the Ronix 20SM air coupler with a chrome-coated body and an operating pressure of 10kgf/cm².

Air couplers, also known as air fittings, are essential components in pneumatic systems used to connect various air tools to an air compressor or air hose. They work by using a simple push-and-pull mechanism that allows for quick and easy connection and disconnection of air hoses and tools. Those who work in the automotive, construction, and manufacturing industries, as well as DIY enthusiasts and any other individual that uses compressed air to any extent, may find air couplers beneficial. They are useful for powering various pneumatic tools, such as impact wrenches, spray guns, and sanders. Air couplers are also handy for inflating tires, powering pneumatic nailers, and staplers, and cleaning dusty or dirty surfaces. Featuring a chrome coating and a large body, Ronix 20PP is such an air coupler that can be used in any situation that needs the transfer of compressed air.

Pneumatic gripper with 2 concentric fingers Finger selflocking closed gripper (toggle joint action) Elastic absorption at opening Interest of 180 ° angle grippers Grippers with 180° opening angle are generally used to suppress a clearance movement because the open fingers allow the product to pass laterally, for example during a linear transfer or for maintaining a product on a turntable. Selflocking on closing by toggle effect These grippers use toggle technology that allows selflocking of the jaws in the last degree of closure and a large clamping force. They therefore remain locked even in the absence of air pressure. They can only be used for a grip from outside the piece and for parts with an identical grip dimension. The detection cam mounted on the axis of rotation allows the 2 inductive sensors to detect any desired position. The option « opening screw limitation » allows to adjust the opening stroke if the 180 ° are not sought

— Whitworth pipe thread- Chambered O-ring — Sealing NBR — Material brass nickel-plated — Temperature range -4 to 176 °F (-20 to +80 °C) — Working pressure range -14 to 232 psi (-0.95 to 16 bar)

Winson Pneumatic & Hydraulic Struts is a machinery products solution company specialize in developing & manufacturing various of nitrogen filled gas springs or call it gas struts,hydraulic dampers, shock absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles (bus,car,truck,trailer), motorcycles trunk, machinery, medical exam & treatment table,chair,bed, fitness equipments ,furniture, doors, cabinets, etc. We only produce reliable quality and affordable pneumatuc & hydraulic struts, customer satisfaction is our consistent pursuit!

The TransiTec pneumatic conveyor S-WS is used when, for example, local conditions do not allow the use of a spiral conveyor, for example when the minimum radius of a flexible conveyor can not be met or to overcome larger conveyor lines. Here are some features of the pneumatic conveyor: - Suitable for conveying granules and dry powders - Large filter surface - Filter cleaning by means of compressed air - adjustable interval filter cleaning - High throughput - Ideal for long conveyor lines - Fields of application: plastics and food industry    as well as chemical and environmental sector. - Different filter sizes up to 10 m2

Our Engineers can design and install pneumatic control units suitable for any business.