Pressure relief valves - Import export

The pressure relief valves GEMÜ N085 and N185 protect the plant and the piping system against gauge pressure and reduces pressure peaks. The third pipe spigot enables the valve to be installed in the main pipe. If the pressure increases, the spring is raised and the valve opens. The pressure is reduced to the preset value and can escape via the third pipe spigot into an adjacent pipe. If the pressure falls, the spring force presses the diaphragm in the direction of the seal seat and it is closed. The spring force can be adjusted as required using a set screw. - Valve adjustments can also be made under working pressure. - The optimization of piston, springs and control face ensures good control characteristics - The actuator is hermetically separated from the medium

As emergency venting device for installation on storage tanks with a VRV to protect against hazardous excess pressure but minimize the loss of gas/vapours. Also suitable as replacement of a manhole. This device does not protect against the hazard of explosion or stabilized burning.

Within the family of pressureregulating valves, a technical distinction is made between series of bypass valves, inline valves and threeway valves.

Pressure relief devices for liquid-immersed transformers open in case of an internal fault and guarantee that the occured overpressure can properly release. Pressure relief devices close with decreasing pressure back to completely closed and leaktight position. Pressure relief devices for transformers can be installed in any position or inclination on the cover or the wall of a transformer. Upon request a transformer can be equipped with several pressure relief valves.

The safety valve is designed to protect the silo from damage caused by high or low pressure encountered during discharge and filling.

Stackable cans К.10, К.05, В.01 are fitted with cap KS.TG46 with pressure relief valve. The cap is designed for discharge of excessive pressure in plastic cans upon storage and transportation of hazardous and poisonous liquids. The cap with pressure relief valve allows usage cans for storage and transportation of gas-forming agents. Caps are fitted with sealing ring from foam polyethylene that ensure sealing, special pressure relief valve and pulling ring.

Stackable can К.20 is equipped with cap KS.TGW 60 with pressure relief valve. The cap is designed for discharge of excessive pressure in plastic cans upon storage and transportation of hazardous and poisonous liquids. The cap with pressure relief valve allows usage cans for storage and transportation of gas-forming agents. Caps are fitted with sealing ring from foam polyethylene that ensure sealing, special pressure relief valve and pulling ring.

Dosing system DB 10: lubrication made easy The dosing system DB 10 uses a pressure vessel with a capacity of 10 litres. This is equipped with a filler ball valve and plastic funnel, a pressure regulator with bleed screw and a safety pressure relief valve. A float switch is fitted to regulate the fill level. There are two dosing valves on the underside. This dosing system is available in the following versions: DB 10 H – with poppet valve DB 40 – with 40 litre reservoir DB 40 H – with 40 litre reservoir and poppet valve

Mini solvent pump | reliable filling of small quantities The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 litres. For reliable filling and dosing of solvents and readily flammable liquids. Simple principle - highly effective Mini solvent pump | reliable filling of small quantities The Mini solvent pump is a high-quality hand pump for small containers such as bottles, canisters and tanks up to about 10 litres. For reliable filling and dosing of solvents and readily flammable liquids. Simple principle - highly effective The hand pump works according to the excess pressure principle. An excess pressure is built up in the container with the pump ball, forcing the liquid outward. In this way only the hose, pumping tube and discharge come in contact with the liquid being filled. To ensure safety, a pressure relief valve protects the solvent pump against excessive pressure build-up, for example due to sunshine.

Waste oil collection/extractor-75 l Venturi-mobile specification Compressed air is pumped into the container via the Venturi block a vacuum is created Manometer/vacuum meter for displaying pressure and negative pressure Oil is extracted via the dipstick opening Level indicator Safety pressure relief valve permanently set to 0.5 bar, with throttle valve Plug nipple for Rectus coupling, type 26, NW 7.2 mm (20 062), ball valve Suction hose, 2 m, with spiral spring Suction probes, Ø 5/6/8 mm With adapter for BMW, Mercedes, VW, Audi and Smart Probe holder Transparent dispensing hose, 2 m, with Steel outlet elbow, ball valve Collection funnel with removable sieve and additional coarse sieve Solid push handle 2 fixed wheels, 2 steering wheels Pressure evacuation Container made of 1.5 mm sheet steel With metal apron to protect against damage Painted with oil-resistant hydrostructure varnish With height-adjustable oil collecting funnel For spare parts see Venturi block (04 426)

KAMAT pressure relief valves for our high pressure pumps ensure optimum working pressure at all times. They can be configured to control pressure either by mechanical pre-adjustment or by remote pneumatic control. We are also able to manufacture many of our pressure relief valves in special materials, making them ideal for the process industry. In addition, our control rods are made from ceramic or stellite, making all our valves highly wear resistant.

Storage and Transportation: ISO tanks provide a safe and secure means of storing and transporting refrigerant gases. These tanks are designed to handle the specific properties and pressures associated with refrigerants.2. Bulk Quantity Handling: SO tanks allow refrigerant gases to be transported and stored in large quantities, facilitating bulk distribution to meet the demands of various industries.3. Safety Features: ISO tanks for refrigerant gases are equipped with safety features to ensure proper handling and storage. This includes pressure relief valves, emergency vents, and other safety mechanisms to maintain the integrity of the tank and prevent accidents.4. Standardization ISO tanks adhere to international standards, ensuring uniformity in size, design, and handling procedures. This standardization alows for seamless intermodal transportation and handling across different regions.5. Efficient Loading and Unloading ISO tanks are designed for efficient

Two-wheel cart with handle Triplex pump with ceramic pistons and connecting rod system Automatic pressure bypass valve with pressure relief from the pump head Three-phase induction motor with Thermal protector Pressure adjustment Gauge pressure Integrated detergent suction Adjustable detergent injector Electric cable length 5 m

Two-wheel cart with handle Triplex pump with ceramic pistons and connecting rod system Automatic pressure bypass valve with pressure relief from the pump head Three-phase induction motor with Thermal protector Pressure adjustment Gauge pressure Integrated detergent suction Adjustable detergent injector Electric cable length 5 m

Pneumatic two-wheel trolley, handle and anti-vibrating feet High-performance piston pump with connecting rod system Automatic pressure bypass valve with pressure relief from the pump head Automatic bypass valve Pressure adjustment Thermal valve / gearbox Integrated detergent suction Powered by Honda gasoline engine with low oil level sensor Inspectable oil levels for pump and gearbox GX390 1,750 Weight 64 Kg Oil plugs drain and discharge ports for easy maintenance and oil changes Inspectable water filter

Heavy-duty 2-wheel cart with handle Triplex pump with ceramic pistons and Connecting rod system Automatic pressure by-pass valve with pressure relief from pump head Three-phase induction motor with Thermal protector Adjustment Pressure gauge Flanged pressure relief Integrated detergent suction Adjustable detergent injector Built-in detergent tank with 3L capacity Inspectable water filter Electric cable length 5 m General characteristics Standard accessories

Forged components for nuclear reactors, boiler systems, piping Valves are pivotal in various industrial contexts. Forged parts designed for nuclear reactors, boiler assemblies, pipeline construction, and safety valves are crucial elements in various industrial applications. Safety valves, typically pressure relief valves, stand out as paramount safety features within most systems. Their primary function is to safeguard pressurized vessels like steam boilers, reactor vessels, and pipelines from potentially hazardous pressure surges. In the event, that pressure exceeds safe limits, these valves release trapped gases, vapors, or liquids either into the atmosphere or into designated manifold systems. The West German drop forge KB Schmiedetechnik GmbH in Hagen (NRW) boasts decades of proficiency in crafting drop-forged components tailored for pressure applications compliant with the Pressure Equipment Directive (PED) and for nuclear facilities adhering to KTA, AVSD, and RCCM standards.

Lincoln P215 Lubrication system pump 30 Liter 400V Suitable for grease to NLGI 2 Includes two pump elements K7 with an output of maximum 47-189 cc/hour. Can be extended to maximum of 15 pumpelements, see related products. Connection pump element 1/4"G Supply voltage 340-420V/50Hz - 440-480V/60Hz Maximum pressure 350 bar Protection class IP55 Temperature -20 to 70°C The advise is to use a pressure relief valve for every pump element. Click here for an overview.

Lincoln P205 lubrication sytem pump 8 Liter 400V Suitable for grease to NLGI 2 Includes pump element K6 with an output of 172 cc/hour. Can be extended to a maximum of 5 pump elements, see related products. Connection pump element 1/4"G Supply voltage 340-420V/50Hz - 440-480V/60Hz Maximum pressure 350 bar Protection class IP55 Temperature -20 to 70°C The advise is to use a pressure relief valve for every pump element. Click here for an overview.

Lincoln P502 Grease pump 1 Liter 24V with Timer Suitable for grease to NLGI 2 Includes pump element k6 with an output of 1.6cc/min. Can be extended to a maximum of 3 pump elements, see related products. Connection pump element 1/4"G Supply voltage 24VDC Maximum pressure 270 bar Protection class IP65 Temperature -25 to 70°C The advise is to use a pressure relief valve with a maximum pressure of 270 bar for every pump element. Click here for an overview..

This valve protects pumps and pipes from pump startup and shutoff pressure surges due to power failure. Pump off means valve normally closed. If pump starting cause pressure surge, the pilot smoothly opens the valve to limit pressure rising. Quick relief valve opens due to both pressure rises and falls, fully reducing any pressure fluctuation.

Forget constant effort and manual pressurization with the e-foam! With this electric foamer, one push on the button is enough to activate the foam. The product has a 1.8 liter reservoir with a handy scale indicating the contents. The e-foam is highly resistant to a wide range of chemicals and produces a thick, adhesive foam. Work for up to 1 hour with a fully charged battery. Lights indicate the battery level while foaming. - With 3mm nozzle and spray angle up to 110° - Lock the control button for continuous foam - With integrated pressure relief valve - With 7.2V lithium-ion battery

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures.Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity

Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure screw pumps are designed for pumping filtered and lubricating fluids such as coolant oils andwatersoluble coolants. High pressure screw pumps are NOT designed for dry-running. Screw spindle pumps are positive displacement pumps which always require the installation of a pressure relief valve in order to prevent bursting. Volumetric delivery: up to 878 l/min Delivery pressure: up to 200 bar Please contact us for delivery quantity

10,000 PSI (700 BAR) CLASSIC SERIES AIR HYDRAULIC PUMP The original air pump! Features a proven, reliable design. Typically sold to customers that already have a fleet of similar pumps. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Power Team, two-speed high performance, PA55 base pump Retract side internal relief valve protects tool 4-way 2-position air pilot valve standard Use with single or double acting tools. Not for lifting applications. Hand remote standard Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) pressure retract relief valve CAUTION: This pump should not be used for lifting applications.

10,000 PSI (700 BAR) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP The original electric pump! Features a simplified electrical control box and a proven, reliable design. Typically sold to customers that already have a fleet of similar pumps. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Power Team, two-speed high performance, PE55 base pump Retract side internal relief valve protects tool 4-way 2-position solenoid valve standard Use with single or double acting tools, not for lifting applications Hand remote standard Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve Fixed 1,500 psi (103 bar) pressure retract relief valve CAUTION: This pump should not be used for lifting applications.

10,000 PSI (700 BAR) CLASSIC SERIES ELECTRIC HYDRAULIC PUMP The PE55TWP-BS has been the market leading electric pump for over 30 years & is therefore tried & tested. A simple, light-weight design with a recent upgrade that has created a cost-effective workhorse. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 122°F (50°C) ambient Proven design = Proven reliability Enhanced Usability: Two Speed High Performance pump Retract side internal relief valve protects tool Hand remote Four-tool manifold (-4 models only) allow use of up to four tools simultaneously 4" calibration capable gauge Use with single or double acting tools Designed with Safety in Mind: Easily adjusted pressure regulator (relief) valve 1,500 psi (103 bar) pressure retract relief valve CAUTION: This system should not be used for lifting applications.

1,500 BAR (21,750 PSI) SUBSEA & LARGE TENSIONER APPLICATIONS High flow tension pump. Corrosion resistant frame works well for applications near salt water. High flow ideal for subsea applications where compressed air is the required power source. Quality means Lower Life-Cycle Costs: Over 100,000 cycles Continuous duty up to 50°C (122°F) ambient Proven design = Proven reliability Enhanced Usability: Calibrated 150mm (6") Pressure Gauge Dual oil outlets with quick-connect, no spill couplings Pneumatic Filter/Regulator/Lubricator included Stainless Steel carry frame Designed with Safety in Mind: Easily adjusted pressure regulator valve Air pressure safety relief valve