Production of electrical cables - Import export

Copper wire rod has high technological characteristics. It is used for the production of cables and wires, electrical products. Oxygen -free copper wire rod is used for the production of a wire without breakages and at higher velocity. It can reduce the production cost.

Copper wire rod has high technological characteristics. It is used for the production of cables and wires, electrical products. Oxygen -free copper wire rod is used for the production of a wire without breakages and at higher velocity. It can reduce the production cost.

Cartridge cradle 7515 Suitable for 900ml 5:1 side-by-side cartridges Application example: Using 900ml 5:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 900ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7515-10.8V Li-Ion 1 cartridge press for 900ml 5:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with c

Cartridge cradle 7508 Suitable for 825ml 10:1 side-by-side cartridges Application example: Using 825ml 10:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 825ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7508-10.8V Li-Ion 1 cartridge press for 825ml 10:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger wit

Cartridge cradle 4515 Suitable for 385ml and 585ml 3:1 side-by-side cartridges Application example: Using 385ml and 585ml 3:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 585ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-4515-10.8V Li-ion 1 cartridge press for 385ml and 585ml 3:1 side-by-side cartridges 1 battery pack 10.8V L

Cartridge cradle 3030 Suitable for 600ml 1:1 side-by-side cartridges Application example: Using 600ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3030-14.4V Li-ion 1 cartridge press for 600ml 1:1 side-by-side cartridges 1 battery pack, 14.4V Li-ion 1 rapid charger with charge indicator and Euro plug 1 plastic case Additional battery pack available on

Cartridge cradle 3030 Suitable for 600ml 1:1 side-by-side cartridges Application example: Using 600ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 600ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3030-10.8V Li-Ion 1 cartridge press for 600ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with c

Cartridge cradle 3015 Suitable for 450ml 2:1 side-by-side cartridges Application example: Using 450ml 2:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack, 10.8V // 1.5AH with LED charge indicator Rapid charger with charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 28 450ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using highly viscous products No annoying air tubes or electrical cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3015-10.8V Li-Ion 1 cartridge press for 450ml 2:1 side-by-side cartridges 1 10.8V li-ion battery pack 1 rapid charger with charge indica

Cartridge cradle 3003 suitable for 345ml 10:1 side-by-side cartridges. Also suitable for 310ml 1K cartridges Application example: using 345ml 10:1 side-by-side cartridges, e.g. composite mortar for securing anchors. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 35 345ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tube or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-3003-10.8V Li-ion 1 cartridge press for 345ml 10:1 side-by-side cartridges 1 b

Cartridge cradle 2020 Suitable for 400ml 1:1 side-by-side cartridges Application example: Using 400ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 28 400ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Packaging PowerMax type HPD-2020-10.8V Li-ion 1 cartridge press for 400ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge indicator and Euro

Cradle 10535 Steel cradle, open Suitable for 1400ml (3:1) 2K side-by-side cartridges Application example: auto windscreen adhesive, hybrid adhesive... Lithium-ion battery pack with 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 40 minutes Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits LED charge indicator on the battery pack Clean, even working Less fatigue, particularly when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: 100 – 240 V ~ 50/60Hz 90W Output: 14.4V A 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-10535-14.4V / Li-Ion 1 battery pack 14.4V // 3.0AH // Li-ion (lithium-ion) 1 rapid charger with charge indicator and Euro plug Additional battery pack available on request Weight: complete set in transport case

Cartridge cradle 7508 Suitable for 825ml 10:1 side-by-side cartridges Application example: Using 825ml 10:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack, 14.4V // 3.0AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 40 minutes Supplied in transport case Drive Extrusion force up to 6500N (650kg) Extrusion rate adjustable from 120 to 240mm/min Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using highly viscous products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7508-14.4V Li-ion 1 cartridge press for 825ml 10:1 side-by-side cartridges 1 14.4V Li-ion battery pack 1 rapid charger with charge indicator and Euro plug 1 plastic case Additional battery pack available on re

Cartridge cradle 6030 Suitable for 900ml 2:1 side-by-side cartridges Application example: Using 900ml 2:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 900ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-6030-10.8V Li-Ion 1 cartridge press for 900ml 2:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge

Cartridge cradle Suitable for 380ml to 410ml 5:1 coaxial cartridges Application example: using 380ml to 410ml 5:1 coaxial cartridges such as 5:1 fire-extinguishing foam cartridges. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 380ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-4C2-10.8V Li-Ion 1 cartridge press for 380ml to 410ml 5:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rap

Cartridge cradle 4C Suitable for 380ml to 410ml 10:1 coaxial cartridges Application example: Using 380ml to 410ml 10:1 coaxial cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack, 10.8V // 1.5AH with LED charge indicator Rapid charger with charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 380ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using highly viscous products No annoying air tubes or electric cables in the working area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-4C-10.8V Li-Ion 1 cartridge press for 380ml to 410ml 10:1 coaxial cartridges 1 10.8V Li-ion battery pack 1 rapid charger

Cartridge cradle with position indicator (consumption indicator) Suitable for 310ml coaxial cartridges as well as 310ml 1K cartridges Application example: composite mortar for fixing purposes, silicon cartridges or sealants Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 310ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-3 CS-10.8V Li-Ion with position indicator 1 cartridge press for 310ml coax

Cartridge cradle, suitable for 310ml 1:1 coaxial cartridges as well as 310ml 1K cartridges Application example: Using 310ml 1:1 coaxial cartridges of e.g. fire-extinguishing foam. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 38 310ml 2K composite mortar cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when using high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPS-3C1-10.8V Li-ion 1 cartridge press for 310ml 1:1 coaxial cartridges 1 battery pack 10.8V Li-ion 1 rapid charger w

Cartridge cradle 7575 Suitable for 1500ml 1:1 side-by-side cartridges Application example: Using 1500ml 1:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery pack with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charge time approx. 30 minutes Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 1500ml side-by-side cartridges per battery charge. Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7575-10.8V Li-Ion 1 cartridge press for 1500ml 1:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger with charge indicator and Euro plug Additional battery pack available on request Weight

Cartridge cradle 7530 Suitable for 1050ml 3:1 side-by-side cartridges Application example: Using 1050ml 3:1 side-by-side cartridges, e.g. composite mortar for anchor securing. Lithium-ion battery with 10.8V // 1.5AH with LED charge indicator Rapid charger with battery charge and status indicator, charging time approx. 30 minutes Supplied in transport case Drive Extrusion force up to 6000N (600kg) Extrusion rate adjustable from 120 to 240mm/min Extrusion quantity: approx. 20 1050ml side-by-side cartridges per battery charge. Automatic pressure reduction prevents material from dripping Benefits Clean, even working Less fatigue when working with high-viscosity products No annoying air tubes or electric cables in the work area Charger: IP30 // Class 2 Input: AC 100 - 240V ~ 50 / 60 Hz 90W Output: DC 10.8 – 18V … 3.4A Safety: CE and GS tested Packaging PowerMax type HPD-7530-10.8V Li-Ion 1 cartridge press for 1050ml 3:1 side-by-side cartridges 1 battery pack 10.8V Li-ion 1 rapid charger wi

Direction of vehicle routes for underground parking Bicolor light strips Low thickness design curve • Service life: 50,000 hours • Luminosity: 1.6 cd • Lighting color: white, orange, red, green, blue • Luminous effect: alternating strips in sequence • Terminal color: gray • Attachment: 2 M6 screws (not included) • Screw cap: 2 in zamak (included) to be glued • Low visible thickness: 19 mm • Mounting position: 1, distance between screws 86 mm • Material: zamak and TR90UV • Electrical connection: 1m 7 x 0.25mm² cable (other lengths on request) • Water resistance: IP 65 protection (IP 67 soon) • Temperature: -25°C to +60°C • Marking: laser engraving or label (on the back of the product) Electrical connection: For a buried cable implementation, use mechanical protection (sheath, conduit... etc.). Use H07RN-Ffire retardant and low smoke cable. The use of rigid cables of type U1000-R2V and others is strongly discouraged due to the risk of causing increasing moisture in the product when combined with waterproof connectors. Warning The spotlight should be powered through 12 VDC to 50 VDC transformer/voltage regulator. Do not use constant current transformer/regulator.

readycable® harnessed cables are ready-to-connect cables for use in energy chains®. As manufacturer and harnesser, igus® provides everything from a single source, thus reducing throughput times and the number of suppliers. The portfolio includes an extensive range of catalogue products, including cables harnessed according to manufacturers' standards and diverse industrial standards as well as individual singly or series produced components. Numerous types of cable of different qualities, with different approvals and with different certifications of conformity are available to choose from. All components are subjected to extensive quality checks and functional tests.

chainflex® robot cables are used in energy chains or 3D applications. The twistable robot cables meet extremely high industrial stress requirements and score points with properties such as resistance to hydrolysis and microbes, UV resistance and many, many others. Different types of robot cable are available, e.g. hybrid cables, fibre optic cables (FOCs), motor cables and servo cables. Typical application areas: - For heavy duty applications - Almost unlimited resistance to oil - Indoor and outdoor applications with average solar radiation - Unsupported travel distances and up to 100 m for gliding applications - Machining centres / machine tools, storage and retrieval systems, packaging industry, handling, refrigerating

chainflex® special cables are cables for special applications such as hanging applications, for use in rail vehicles or thermal and compensation cables. Use our comprehensive knowledge about cable plus the experience of 2 billion test cycles that are annually realized in the company-owned chainflex® laboratory. The steadily growing product range of the chainflex® special cables is based on the requirements of our customers. igus® also manufactures cables for special applications and uses a wide range of materials and manufacturing processes. Depending on the design, customer-specific special products can be made from lengths of 500 m. We look forward to hear about your job definition!

-For medium duty use -Minor oil influence -More suitable for indoor applications, but also for outdoor use at temperatures > 5 °C -Unsupported travel distances and up to 20 m for gliding applications -Bus connection cable for machining units/machine tools, handling, indoor cranes

Initiator cables, also referred to as sensor/actuator cables, connect control units and different sensors, or, in the case of reversal of the measurement principle, actuators. Frequently used abbreviations include ini or ini cable (plural: inis). Sensor or measurement transducers transform physical quantities such as rotation, speed, distance or length into analogue electric impulses. In the case of an actuator, the measured electric current (symbol: I, unit: ampere; A) or voltage (symbol: U, unit: volt; V) is transformed into temperature, pressure or torque. The connection cable consists of at least three cores with a small cross-section of between 0.14mm² and 0.34mm². In the simplest case, two cores are required for supplying the voltage, while the last core transmits an I/O signal. For sensitive applications, there are shielded versions in addition to the traditional ini cables to avoid EMC disruptions (electromagnetic compatibility).

- Requirements: For extremely heavy duty applications - Outer jacket: TPE - Hydrolysis and microbe-resistant - Silicone-free - UV-resistant - Oil resistance: Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA

The chainflex® bus cables are available for all well-known industrial bus systems such as Profibus, Interbus, Profinet, Ethernet, CAN-Bus, DeviceNet, ASi or CC link. Depending on the cable family, they can be used for torsion, for severe climatic conditions, for narrow radii, or particularly long travel distances, at high speeds and accelerations. Tested in the igus® laboratory with millions of cycles in e-chains®, they provide guaranteed safety against failure. -Bending radii up to 7,5xd -Jacket materials: PVC, iguPUR, PUR or TPE -For flexing applications -For medium duty applications -For extremely heavy duty applications -For twistable use -For heaviest duty applications in rail vehicles -For increased tensile load -Overall shield Flame retardant

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

chainflex® CF Air pneumatic hoses were tested in e-chains® for over several million bending cycles. Their outstanding features include flexibility, high abrasion resistance and very good resistance to oil and coolants. -For extremely heavy-duty applications -PU/PE hose -Oil- and coolant-resistant -Abrasion-resistant -Outside-toleranced -PVC and halogen-free