Ptfe gaskets - Import export

Due to the wide range of different designs, perfectly suitable PTFE seals are available for every application. The PTFE gaskets from billi are characterized by high dielectric strength, excellent electrical insulation properties and a low thermal conductivity. All items are manufactured with a high processing quality. Discover the various PTFE gaskets in our online catalogue and order the right products for your application directly from billi. Depending on the respective requirements, different PTFE seals are suitable for you: Our comprehensive range includes, for example, PTFE thread sealing tapes with a temperature resistance of -200°C up to +260°C. The PTFE tapes are both, odourless and insoluble. In addition, the PTFE thread sealing tapes have a particularly low coefficient of friction, which improves their performances. We also offer PTFE cord with a pressure resistance of up to 10 bar. Possible applications include valves as well as piston and centrifugal pumps.

We develop and manufacture special seals for power stations, for the chemical and petrochemical industries, for machinery and pipeline construction. In other words, seals that provide the greatest possible reliability even under extreme operating conditions (pressure, heat, cold, aggressive media) – at temperatures from -200 to +1.000 °C. Product Range: - DVGW tested, see separate brochure - Punched, cut seals - Plates, foils - Semi-finished items - Form articles Benefits: - Highest chemical resistance - Insoluble and does not swell in organic or anorganic solvents - Resistant to the weather - Temperature range -190 to +250 °C - Highly anti-adhesive, does not stick - Resistant to hydrolysis Common fillers: - Quartz - Glass - Carbon / Graphite - Bronze - or without filters Fillers reduce the cold flow, lead to higher resistance to temperature and media, improve thermal conductivity and increase resistance to abrasion and pressure levels.

Barrel pump made of stainless steel with discharge tube. The Bürkle barrel pump made of stainless steel AISI 304 (1.4301) is suitable for filling combustible and easily flammable liquids. The barrel pump can conduct electricity and therefore fulfills the requirements for handling flammable liquids in combination with the accessory antistatic set. The PTFE gaskets ensure long-term and maintenance-free use. Pumping capacity approx. 9–22 l/min, dependent on pump length. The wide range of accessories makes it possible to adapt the pump to very different requirements.

Fluoroplastic tape, sheet, film and lubricants offer low coefficient friction, high working temperatures and non-stick release properties. We offer PTFE tape, PTFE sheet, FEP film and ePTFE (expanded PTFE) sealing tape in standard and bespoke thickness and sheet sizes. We also offer a wide range of PTFE lubricants and greases. Our fluoropolymer tape, sheet, film and lubricants range: - PTFE Sheet & Tape - Tedlar® Film - FEP Film - Expanded PTFE (ePTFE) Gasket Sealing Tape - PTFE Lubricants For more information, visit the adtech.co.uk website or contact us: - t: +44 (0)1285 762000 - e: sales@adtech.co.uk

Body- Cover : GG-25 Cast Iron ( EN GJL 250 ) / Ball : Ductile Iron or Stainless Steel / Gasket : PTFE - Teflon / O-Ring : EPDM- NBR / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 10-16 Bar *** Applications Area : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Body- Cover : GG-25 Cast Iron (EN GJL 250) / Filter : Stainless Steel / Gasket : PTFE-NBR-EPDM / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 16 Bar *** Applications Area :Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids / Saturrated Steam

Body- Cover : GG-25 Cast Iron ( EN GJL 250 ) / Ball : Ductile Iron or Stainless Steel / Gasket : PTFE - Teflon / O-Ring : EPDM- NBR / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 16 Bar *** Applications Area : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Body- Cover : GGG-40.3 Ductile Iron (EN GJS 400-15) / Ball : Ductile Iron or Stainless Steel / Gasket : PTFE - Teflon / O-Ring : EPDM- NBR / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 40 Bar *** Applications Area : Pressured Gases / Liquid Fuels / Natural Gas and LPG

Body- Cover : GGG-40.3 Ductile Iron (EN GJS 400-15) / Ball : Ductile Iron or Stainless Steel / Gasket : PTFE - Teflon / O-Ring : EPDM- NBR / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 16 Bar *** Applications Area : Pressured Gases / Liquid Fuels / Natural Gas and LPG

Body- Cover : GG-25 Cast Iron ( EN GJL 250 ) / Ball : Ductile Iron or Stainless Steel / Gasket : PTFE - Teflon / O-Ring : EPDM- NBR / Connection : Flanged / Max. Working Temp. : 120 ºC / Max. Working Pressure: 6 Bar *** Applications Area : Hot and Cold Water Systems / Compressed Air System / Non-acidic and non-flammable liquid fluids

Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron+ Nickel Coated / Handwheel : Ductile Iron+ Nickel Coated / Shaft : Stainless Steel / Gasket : EPDM-NBR-PTFE-VITON / Connection : Flanged (Wafer Type) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : HVAC Systems / Water Treatment Systems / Paper Industry / Fresh Water System

Test and Drainage Valves / Body: Brass ( Forged ) / Ball : Brass / Gasket : PTFE ** Connection Type: Threaded or Grooved / Working Pressure: 300 PSI ( 20,6 Bar ) / Working Temp.: -10ºC , +120ºC / Working Test Pressure: 600 PSI (61,8 Bar) *** In sprinkler systems, these valves are used for the testing systems and drain the unnecessary fluids from the systems. Advantages: They have sight glasses in their body,single valve is sufficient to drain the line. For choosing the test and drain valves, users should pay attention to line diameter. Also these valves have to have same diameter with the sprinkler orifice diameter. **** Application areas: The system where has sprinkler systems.

Body : GG-25 Cast Iron (EN GJL 250) / Disc : Ductile Iron+ Nickel Coated / Handwheel : Ductile Iron+ Nickel Coated / Shaft : Stainless Steel / Gasket : EPDM-NBR-PTFE-VITON / Connection : Flanged (Lug Type) / Max. Working Temp. : 110 ºC / Max. Working Pressure : 16 Bar *** Applications Area : HVAC Systems / Water Treatment Systems / Paper Industry / Fresh Water System

Hand- and Manhole gasket made of biaxially expanded PTFE Characteristics Chemical resistant for universal use as per TRD 611 Very adaptive to surfaces FDA Conformity No hardening, non stick on flanges Technical parameters Temperature: t = +250 °C Pressure: p = 40 bar Main application Hand- and Manhole covers for hot water, pressure and steam vessels Suitable for Hand- and Manhole covers of all industries Also suitable for sample pressure tests (cold) Approvals TRD 401 / VdTÜV Dichtung­ 100 Klasse D Form of delivery As biaxially expanded PTFE tape in the dimension 15 x 6 mm in length of 5 mtr.

Compression Proof and Form Stable Biaxial expanded Joint Sealant Characteristics No change in width at compression Excellent on slim or restricted flange area Technical parameters pH 2 - 12 Temperature: t = -200 … +280 °C Pressure: p = Vacuum … 200 bar Density: 0,95 g/cm 3 Main application Larger flanges and vessels Glaslined flanges Agitators Heat exchangers Form of delivery 10 mtr / roll Other length and dimension on request Suitable for Pharmaceutical industry Food industry Approvals FDA21 CFR 177.1550 (PTFE), FDA21 CFR 170.105 (adhesive) EG 1935:2004 EU 10/2011 FDA Installation Instructions Connect the ends with an angle cut Maximum uneveness of flange: 1/3 of seal tape’s thickness Dimensions thickness (mm) Recommended for Steel Flanges width according DIN 2690 (NW) Surface pressure/ resulting thickness in 10 N/mm2 Surface pressure/ resulting thickness in 20 N/mm2 Surface pressure/ resulting thickness in 30 N/mm2 Surface pressure/ resulting thickness in 40 N/mm2 2 ≤...

Universal ePTFE Gasket Tape HD with higher density Characteristics Very adaptive to surfaces Chemical resistance Simple to install Very high cross section sealability Wide area of applications Does not stick on flanges Easy to remove Universal sizes reduce stock keeping Material 100 % expanded PTFE Chemical resistant against all products with the exception of molten Alcalimetal and elementary Fluor Main application Pipe Columns Separation joints Mixer Pump Housing Machine Housing Glass- and Graphite-Devices Lined vessels Sight glasses Hand- and Manhole covers (Not TRD401) Ventilation and Air Condition Channels Steel and Plastic flanges Pipes and devices with highly aggressive chemicals Gearboxes Suitable for Pharma industry Food industry Approvals FDA21 CFR 177.1550 (PTFE), FDA21 CFR 170.105 (adhesive) EG 1935:2004 EU 10/2011 FDA Dimensions Dimension (mm) Gasket spool 10 m Gasket spool 25 m Gasket spool 50 m Seal area width 3 x 0.3 x x >3 mm 3 x 0.7 x x >3 mm 4 x 1.5 x x >15 mm

ePTFE Gasket Pressure-Vacuum: Up to 250 bar (according to the operational and/or assembly conditions) Temperature: -240 °C up to +270 °C, short term +310 °C. After temperature exceeds 120 °C for the first time the bolts should be Re-tightened. Characteristics Simple to install Excellent adaption, ideal to compensate uneven gland surfaces Physiologically safe in temperatures up to 260 °C No change in sealant width after compression, therefore ideal for slim or limited seal areas Selection criteria: max unevenness of gland should not be bigger than 1/3 of seal thickness Operating range Pressure [p max]: Vacuum ... 250 bar Temperature: t = -240… +270 °C pH: 0 - 14 Pressure-Vacuum: Up to 250 bar (according to the operational and/or assembly conditions) Temperature: -240 °C up to +270 °C, short term +310 °C. After temperature exceeds 120 °C for the first time the bolts should be Re-tightened. Resistant All media pH 0-14, e.g: acids, alkaline, solvents, paint, oil, grease,...

100 % virgin PTFE, modified and filled with Barium sulfate Characteristics Protected against cold flow Excellent recovery Excellent chemical resistance in caustic applications Reduced leakage rates compared to other filled PTFE gaskets under the same gasket stress. Technical parameters pH 0 - 14 Temperature: t = -180 … +230 °C, short term up to 260 °C Pressure: p = 55 bar Article code / Thickness WHITE 08 / 0.8 mm WHITE 10 / 1.0 mm WHITE 15 / 1.5 mm WHITE 20 / 2.0 mm WHITE 30 / 3.0 mm Main application Steel-, Glass-, Ceramic-, glass lined or plastic flanges on pipework Vessel Container Reactors Suitable for Chemical and Petrochemical industry Approvals TA-Luft Form of delivery Gasket sheet size of 1,500 x 1,500 mm in thickness of 0.8/1.0/1.5/2.0/3.0 mm or cut gaskets according to drawing or EN and international Standards, special dimensions on request.

Static, Sintered PTFE Sheet Gaskets Characteristics Microcellular structured PTFE filled with hollow glass microspheres High sealability even at low gasket stress Minimized cold flow Very good recovery High compressibility and adaptability even at slightly damaged flanges Technical parameters Temperature: t = -180 … +230 °C Pressure: p = 55 bar Article code / Thickness BLUE 05 / 0.5 mm BLUE 08 / 0.8 mm BLUE 10 / 1.0 mm BLUE 15 / 1.5 mm BLUE 20 / 2.0 mm BLUE 30 / 3.0 mm Main application Steel-, Glass-, Ceramic-, glass lined or plastic flanges on pipework Vessel Container Reactors Universally on all tension sensitive equipment flanges. Suitable for Chemical industry Pharmaceutical industry Food industry Approvals DVGW TA Luft FDA EG 1935:2004, EU 10/2011 FDA Variant D3.1 Modified PTFE: Reduced deformation under pressure, better resilience under varying pressure, reduced thermal expansion coefficient (approx. 50 %) D3.2 Glas: Improved compression strength due to glas fiber...

Adapted to high temperatures, PTFE - Polytétrafluoroéthène - is also well known as Teflon. PTFE has good chemical resistance and low friction coefficient. It is used for sealing functions, as membrans, gaskets, O-rings, or for electrical insulation.