Securing clamps - Import export

Shaft support with bore for easy and secure clamping and fastening the guide shafts. Precision guide shafts 21595. Fastening screws 07160 or 07161.

Center zip and button closure Elastic waistband Double security stitching Clamps Six pockets: 2 French pockets 2 patch pockets, with center gusset, flap and velcro 2 rear gusset pockets, with flap and velcro TWILL. 100% COTTON 240 GSM

Center zip and button fastening Elastic waistband Back security seams Clamps Six pockets: 2 French pockets 2 patch pockets, with center gusset, flap and Velcro 2 rear gusset pockets, with flap and velcro

Central zip and button closure Secure back seam Elastic waistband Clamps Three pockets: 2 French pockets 1 back piping pocket with flap and button Sarga. 65% POLYESTER - 35% COTTON

Completely mounted multi-clamping stations with integrated UNI lock Ø138 mm mounting clamps. The clamping stations are secured to the machine table directly or with clamps. Common bore patterns are pre-centred on the rear side for mounting. Clamping stations can be aligned via the 14H7 reference holes. The clamping stations are actuated via a central pneumatic connection. The high clamping forces are generated by the integrated spring package (the unit clamps in the de-pressurized state). The release process occurs pneumatically. The following retaining forces are possible with the UNI lock clamping bolt in conjunction with mounting screws M10, M12, M16: Retaining force (M10) 35,000N/module Retaining force (M12) 50,000N/module Retaining force (M16) 75,000N/module

Collets for clamping external contours. The contour of the workpiece to be held is inserted into the collet. Free-form and asymmetrical contours can be held. The collet mechanism enables a secure clamping of the workpiece. Clamping travel per collet segment (8x) max. 0.15 mm. Workpiece repeat accuracy: ±0.03. Collet repeat accuracy: ±0.02. Matching adaptor 03167.

• The wire cloth shield has the dimensions 200x135mm and a window opening • Lenses with Ø of 50mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail

• The wire cloth shield has the dimensions 300x180mm and a window opening • Lenses with the dimensions 60x120mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail

The indexing and clamping grips enable the positioning, securing and clamping of diverse positioning elements with just one product. Indexing is carried out using the indexing pin and the item is clamped using the end face of the sleeve. A protruding signal button means that the indexing pin is not completely extended.

• The wire cloth shield has the dimensions 200x135mm and 2 windows with Ø 50mm • Lenses with Ø of 50mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail

• The mesh visor is made of galvanized wire cloth • It shields the face against radiant heat • The mesh visor has a window opening for lenses with the dimensions 60 x 120 mm • Among others, blue inspection glasses, green welding glasses, or clear glasses can be utilized in the window opening • The lenses are securely clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare

• The mesh visor is made of galvanized wire cloth • From the outside the mesh visor is covered with aluminised fabric • It shields the face against radiant heat • The mesh visor has a window opening for lenses with the dimensions 60 x 120mm • Among others, blue inspection glasses, green welding glasses, or clear glasses can be utilized in the window opening • The lenses are securely clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare

• The mesh visor is made of galvanized wire cloth • From the outside the mesh visor is covered with aluminised fabric • It shields the face against radiant heat • The mesh visor has a window opening for lenses with the dimensions 60 x 120mm • Among others, blue inspection glasses, green welding glasses, or clear glasses can be utilized in the window opening • The lenses are securely clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare

Chain clamps are used mainly in machine and plant construction. Chain clamps enable cylindrical, complicated and large to very large workpieces to be clamped securely and effectively in the quickest and easiest way. Suitable for cylindrical workpieces, valve bodies, pistons etc. The workpiece surface can be protected by attaching the plastic elements. Application: The knurled nut on the clamping bracket can be used to preset the chain length and the clamping force. The required torque is set on the clamping hook. Accessory: Steel roller chains for chain clamp sets 04211-03. Steel turnbuckles for chain clamp sets 04211-06. Steel prisms for chain clamp sets 04211-09. Nuts for T-slots DIN 508 enhanced, 07060. Cap screws DIN EN ISO 4762, 07160. Note: The opening angle of the chain should not exceed 30°. Do not exceed max. permitted tightening torques. Supplied with Chain clamp set 04211-15: Clamping hook. Clamping bracket.

The required torque is set by a set screw and a graduated scale. The set value can be secured using the lateral clamping screw. When the set torque is reached the grip audibly and palpably releases. The loosening torque is higher than the tightening torque so that the torque handle can be released without any problems. The internal thread version has a hole in the set screw so that the torque handle can also be used on threaded rods. Set torque accuracy ± 5%. On request: Other thread lengths.

In contrast to DVK-6 quick closure pipe couplings, DVK-6 Fix pipe couplings only the upper area of the slit coupling is closed with a clamping lever. The clamping lever can be locked in any desired position by a simple upward pull. A high clamping force develops due to optimal length of lever. double secured massive aluminium clamps very easy to mount due to circular version white EPDM gasket (temperature-resistant from -30°C to +120°C), food-safe black natural rubber gasket (-20°C to +60°C)

DVK 6 pipe couplings are designed for a quick and safe use in suction conveying. massive aluminium clamps (double secured) screws M 8 with massive threaded bars very easy to mount due to circular version black natural rubber gasket temperature-resistant from -20°C to +60°C) white temperature-resistant EPDM gasket (-30°C to +120°C), food-safe optionally available with silicone gasket (-60°C to +200°C)

Also DVK-HD® pipe couplings with traction relief are ideal for a quick and safe use for pressure conveying. Their characteristics are equal to DVK-HD® pipe couplings: double secured massive aluminium clamps screws M12 with massive threaded bars very easy to mount due to circular version, nitrile gasket is temperature-resistant from -20°C to +80°C and safe for use with food optionally available with silicone gasket (-60°C up to +200°C) Additionally pipe couplings of type DVK-HD® with traction relief have the following product specifications: monobloc pipe coupling with traction relief with bridge part to safeguard against axial forces material: couplings in aluminium, clamps in galvanized steel pipe clamps and traction bars traction-resistant

DVK-HD® high pressure pipe couplings are perfect for a quick and well-priced mounting for pressure conveyors. They have the following characteristics: for outer pipe diameter from 60.3 to 206.0 mm length: 100, 150, 200 mm or longer metal casing made of aluminium AlMgSi 0.5 F22 massive aluminium clamps (double secured) screws M12 with massive threaded bars pressure-resistant up to maximum of 12 bar (see table) vacuum-resistant up to maximum of 0.8 bar (see table) circular version, therefore very easy to mount white EPDM gasket or nitrile gasket, temperature-resistant and food-safe optionally available with silicone gasket (-60°C to +200°C) Mounting these pipe couplings is safe and hazard-free because no welding works are necessary. They also can easily be dismantled – connecting pieces and pipes can be reused.

The screw is tightened or the clamping lever is turned to expand the two wedges in the hole. The infinitely adjustable shaft collar enables one or more stop elements with various thicknesses to be securely fixated. Application: These clamping pins are perfect for fixing standard stop elements with various thicknesses to hole grid boards / welding tables with hole Ø 16 mm or 28 mm. Advantages: Infinitely adjustable clamping range of 0-36 mm and 0-75 mm. Not affected by the diameter or surface quality of the bore (up to H12). Clamping range can be easily preset using the scale. Gentle clamping in the bore. Pull-down effect even with thin table material (≥8 mm or ≥4 mm). Compatible with conventional stop elements.

DVK 6 pipe couplings with quick closure accelerate mounting in suction conveying with constant safety. The clamping lever can be locked in any desired position by a simple upward pull. A high clamping force develops due to optimal length of lever Additionally DVK-6 pipe couplings with quick closure offer the following characteristics: double secured massive aluminium clamps screws M 8 with massive threaded bars very easy to mount due to circular version black natural rubber gasket (-20°C to +60°C) white EPDM gasket (temperature-resistant from -30°C to +120°C), food-safe optionally available with silicone gasket (temperature-resistant from -60°C to +200°C)

The collet is opened by applying compressed air to the "open" port. The collet is closed (for clamping) by applying compressed air to the "close" port. The pneumatic connections can be screwed on either from below or from the side. If the air is connected from below, the side ports must be closed. Machining the collet for external clamping: The negative form of the workpiece to be clamped is machined into the collet. Free-form and asymmetrical contours are possible. Different workpieces can be clamped quickly and securely by simply exchanging the collet. The collet can be milled down to height H2. This enables multiple workpiece contours to be machined into one collet. Repeat accuracy for workpiece: +/-0.03 Repeat accuracy after replacing the collet +/- 0.02 The collet radial clamping travel is 0.15 mm per clamping segment. To prevent damage the collet should not be tightened without a workpiece or clamping ring in place. The operating air pressure should lay between 0.45 - 0.55 MPa.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.