Thrust washers - Import export

iglidur® Q: Fit for high load iglidur® Q is the low priced solution for high holding times at high to extreme loads. Bearing made from this material suits all types of movements, but is used preferentially in oscillating motions. iglidur® Q is available as cylindrical bearings, plain bearings with flange and thrust washers. Excellent abrasion resistance, especially with high loads suitable for extreme pv-values Good coefficients of friction Insensitive to dirt

iglidur® A200: Delicious FDA compliant material for applications with low to medium loads in immediate environs of (or contact with) food or drugs. Dimensions according to DIN 1850 and special dimensions. iglidur® A200 is available as cylindrical bearings, plain bearings with flange and thrust washers. The iglidur® A200 products comply with the requirements of the FOOD AND DRUG ADMINISTRATION (FDA) For direct use in the vicinity of (or in contact with) food or drugs For low speeds

iglidur® X: The high-tech troubleshooter When it's hot, iglidur® X is the right solution. This is true both literally and figuratively, for instance with extreme chemicals. The interesting thing is the abrasion resistance actually increases at high temperatures. iglidur® X is available as cylindrical bearings, plain bearings with flange and thrust washers. For operating temperatures from -100°C to + 250°C in continuous operation Very good chemical resistance High compressive strength Lowest humidity absorption Extremely wear resistant for the entire temperature range

iglidur® W300: The endurance runner The specialist for extremely high wear resistance, also for rugged shafts or especially abrasive environmental media. Attain maximum holding times in your applications with iglidur® W300. Dimensions according to ISO 3547-1 and special dimensions. iglidur® W300 is available as cylindrical bearings, plain bearings with flange and thrust washers. For extremely high service life in continuous operation Low friction value Extremely high wear-resistance Suited for rough shafts and stainless steel shafts Dirt resistant

iglidur® M250: Thick and Robust iglidur® M250 bearings are vibration dampening, rugged and wear resistant. In applications with low speeds, they balance edge loads very well and help to minimize noise. iglidur® M250 is available as cylindrical bearings, plain bearings with flange and thrust washers. Excellent vibration dampening Insensitive to misalignment High impact strength For greater wall thicknesses according to DIN 1850 Dirt can accumulate

iglidur® G: The all-rounder The widest range of differing requirements are fulfilled by iglidur® G bearings. That's why this material is rightly termed universal. Recommended are applications with medium to high loads, medium surface speeds and moderate temperatures. iglidur® G is available as cylindrical bearings, plain bearings with flange and thrust washers. Maintenance-free, dry operation high wear-resistance Insensitive to dirt and dust Over 650 dimensions Delivery: from stock Low-priced

Thrust bearing / Spherical axial bearings from igus d1 [mm]: Mechanical properties The self-aligning spherical igubal ® thrust bearings are very easy-to-mount units, which help to compensate for errors and prevent misalignments. The thrust bearing housing pad is made of the impact-resistant, stiff, thermoplastic composite material igumid G. The standard thrust bearing washer is made of iglidur® W300. This combination provides particularly good gliding and wear properties in relative movements. Loads The load carrying capacity of the spherical igubal® thrust bearing is very high in normal ambient temperature. In particular cases the load carrying capacity of the axial bearings should be checked in a practical trial with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. Installation The axial bearing pad is mounted flush and secured. The spherical washer glides loosely in the pad and is held by the shouldered shaft mounted on it. Delivery program As standard, the spherical igubal® axial bearings are supplied in sizes of 5 to 20 mm. For other dimensions, please contact us. Special features Simple assembly Compensation of misalignments Compensation of edge loads Very good gliding and wear properties, low installation space When to use it? When you want to save weight When freedom from corrosion is required When a bearing with good friction coefficients is sought When not to use? When very heavy loads act When constant temperatures of more than +80℃ occur When high rotary speeds must be implemented. Thrust bearing / Spherical axial bearings from igus d1 [mm]:

Handle electropolished or blasted. Thrust washer, hinge pin and screw bright. Note: The thrust washer face is lightly greased before delivery. The grease is FDA conform and is suitable for use in the foodstuff and pharmaceutical industries.

Handles cast aluminum EN AC-46200. Thrust washer plastic PA 66 GF 35-X fibreglass reinforced. Hinge pin stainless steel 1.4305. Studs and washer steel grade 5.8 or stainless steel 1.4305. Version: Handles fine structured powder-coated, black or red RAL 3003. Thrust washer black. Hinge pin bright. Studs and washer blue passivated steel or bright stainless steel. Note: Plastics are subject to creeping under load (retardation).

Grip black or traffic red RAL3020. Thrust washer black. Hinge pin bright. Stud and washer trivalent blue passivated or bright stainless steel. Note: Adjustable cam levers are used if the position of the lever relative to the axis of tension only permits one specific position (interference circle). The exact position of the lever is adjusted using a screwdriver on the fine thread setscrew. Plastics are subject to creeping under load (retardation), this can cause reduced clamping force. Drawing reference: 1) setscrew for fine adjustment of lever

By using clamping levers with integrated clamping force intensifier, the clamping force can be increased by up to 75% compared to standard clamping levers. Furthermore, this product can also be used by persons with limited hand strength (e.g. in rehabilitation) to achieve comparable clamping forces with less effort. Less effort is also needed to loosen the clamping lever. The increase in clamping force is achieved by the integral needle roller thrust bearing, which generates very low surface friction on a rigid contact surface during clamping. The hardened thrust washers are designed for high clamping forces and the bearing with its high load rating guarantees a long service life. The clamped component is permanently protected by the large, stationary contact surface. A washer is no longer required. Due to the modular construction many special designs are available.

MACHINE MODEL 206, 212, 214, 224, 3014, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312B L, 312C, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315, 315B L, 315C, 317, 318D2 L, 414E, 416B, 416C, 416D, 416E, 416

MACHINE MODEL 206, 212, 214, 224, 3014, 3054, 3054B, 3054C, 3054E, 3056, 3056E, 307, 312, 312B L, 312C, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 315, 315B L, 315C, 317, 318D2 L, 414E, 416B, 416C, 416D, 416E, 416