Single-phase motors - Import export

"2 CONDENSATORS SINGLE-PHASE MOTORS (OUR CODE: MML) - with centrifugal coupler or electronic relay - Motors available in 230V - 1500 or 3000t/min - Aluminium frame - Multiposition - IP55 protection - Shape B3-B5-B14 -B35-B34 - Stored between 0,37 and 3,7kW"

"SINGLE-PHASE MOTORS 1 CONDENSATOR (OUR CODE : MMY) - Motors available in 230V - 1500 or 3000t/min - Aluminium frame - Multiposition - IP55 protection - Shape B3-B5-B14 -B35-B34 - Stored between 0,37 and 3,7kW"

BD 400 is the universal portable electric lift for raising heavy loads safely. Thanks to its unique construction, lifting loads as close as possible to a wall is also possible It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use. Mast with aluminum anti-twist rails Only 2 elements: the elevator and the lifting accessory Immediate use on site, activated in a few seconds without tools 230 V single-phase electric motor with speed variator Possible use in the event of a power outage using the crank provided (or battery-powered screwdriver) Integrated torque limiter, cuts off lifting in case of overload Easy transport on site thanks to transport wheels Stabilizer with adjustable length wheels By design, the feet are placed in front of or behind the mast (for facade work)

CM 520 - Portable electric lift, load capacity: 140 kg up to 3 m 130 kg at 4 m 90 kg at 4.9 m Low weight portable device - only 38 kg Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V single-phase electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power outage using the supplied crank or screwdriver on batteries

Trolley with vane pump Cartridge filter: 10 microns Suction and discharge kit: Oil: 10 to 500 cSt (mm2/s) Built-in and adjustable bypass Maximum suction lift: 5 metres Maximum temperature of the pumped liquid: 60°C Single-phase or three-phase motor Voltage: single-phase 230 (FiLTRO20, FiLTRO22) and three-phase 400 (FiLTRO21, FiLTRO23) Current: 4.6 (FiLTRO20), 2.2 (FiLTRO21), 7.8 (FiLTRO22), 5 (FiLTRO23)

0.55 kW Compact externally ventilated single-phase three-phase motor with capacitor, 5 m connection cable included and shock-proof plug. The motor is designed in a way that acid vapours or aggressive atmosphere cannot damage it. Light and convenient Quiet and durable Quick motor assembly/disassembly by Lutz hand wheel

0.55 kW Compact externally ventilated single-phase three-phase motor with capacitor, 5 m connection cable included and shock-proof plug. The motor is designed in a way that acid vapours or aggressive atmosphere cannot damage it. Light and convenient Quiet and durable Quick motor assembly/disassembly by Lutz hand wheel

Compact and powerful single phase two-value capacitor motor. Light and convenient Quiet and durable With motor protection switch, connection cable and plug Quick motor assembly/disassembly by Lutz hand wheel Type of drive: Electric Explosion Protection: not explosion-proof

Eccentric screw pump tube HD-E Industryfor oils, paints and disposal liquids is available in the food version (Pure) The HD-E Eccentric screw pump in the industrial version transfers the advantages of the Drum pump low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with mechanical seal and a free-running shaft with an eccentric screw as the pumping element - all easy to dismantle and clean. The Pump tube can be suitably combined with our single-phase motor. This ensures the draining of liquids and thus saves important resources. * also available in special immersion depths * Pump tube equipped with Lutz original hand wheel * Media examples: Oils, waste oils, disposal liquids, paints. * Smooth running * Uniform volume flow * Gentle, low-pulsation product conveying * Low wear * Easily detachable outer tube

Kom is used to distribute warm air to rooms using insulated ducts. Suitable for continuous operation. It is equipped with a thermostat that allows you to adjust the activation temperature. The modern design of the turbine ensures high efficiency and reliability. Single-phase asynchronous induction motor adapted to speed regulation, thermally protected. Casing made of galvanized sheet steel resistant to corrosion and mechanical damage, insulated with mineral wool.

Large motorized projection screen from 8 to 25m wide New housing design ! Compared to Polivision, more compact heavy duty aluminium housing with faster hoist integrated on the right side. Bottom roller motorized screen (olio screen). Fully compatible with all type of PVC screen materials, including 3D projection surfaces ! Technical specification Aluminium rolling tube of 206mm diameter for width up to 13m. Rolling tube made of carbon fibre tube 255mm diameter for width bigger than 13m. Somfy radio remote control supplied as standard. The screen is protected inside a square H 52 x L 43 cm open aluminium casing covered with black trevira CS fabric flame retardant permanent. Antigiratory stainless 3 or 4mm diameter cables. Fixing method : Heavy duty triggers clamps, ceiling or wall fixing brackets. Other type of fixing could be designed on request. Hoist : Somfy CS 200 motor. Single phase 240V 16Amp. Constant rising Speed : approximately 20 cm/sec. 30 rpm/minute Integral thermal...

A precise 90° saw cut is a basic requirement for orbital weld preparation. Robust saws for all wall thicknesses Powerful drive motor Uniform and easy feed control by means of handwheel Different chamfering blades mountable Right-angled saw cut 4, 5 or 6 clamping jaws made of stainless steel as well as reducing jaws Due to concentric clamping no deformation with thin-walled pipes Also for cutting off pipe bends Quick-release fastener for easy changing of saw blades Chip removal during cutting by means of integrated brush Convenient adjustment of plunge depth by means of feed wheel Technical Data: Size range in mm: OD 6 – 220mm Size range in inch: 0.236″ – 8.661″ Wall thickness: 1 – 8mm Electric drive: Single-phase AC motor Mains voltage (input): 200/220VAC (50/60Hz) Power: 1000W / 4.5A Protection class: II Speed control: 6-step control Weight: 47 - 77kg Package includes: Tube saw with electric drive One saw blade One bottle of saw blade lubricating oil

It is an easily adjustable and useful machine. Work efficiency is high. Our warehouses are produced from polyethylene against the harmful effects of pesticides. In gasoline models, HONDA GX160 model gasoline engine is used. In the electric model, a single-phase electric motor is used. The water filter can be cleaned easily. Thanks to the regulator, the pressure can be adjusted according to demand. In this way, spraying can be done at the desired flow rate. There are level indicators on both sides of the tank. It can be easily connected to the tractor with the trailer tongue with pull type wheel jack system.

Motor run capacitors, range 1 to 80 µF Motor starting capacitors, range 80 - 200 µF Starting relays for single-phase motors

Product Features: • The MDF filter range is a single phase EMC filter which offers high performance filtering with stud mounting connections and is a compact and cost effective EMC solution to noisy environments. • Available in 6 current ratings, from 6 Amps to 50 Amps, at single phase 250V and built to satisfy BS EN 60950. • Typical applications includes inverters and servo AC drives where short cables are used. • All products are RoHS compliant and approvals held include UL and cUL.

The STR-1-15L22 is a transformer fan speed controller with which you can manually regulate the fan speed of single-phase motors in 5 steps. The unit also has an off-position. It needs a 230 VAC/50-60 Hz supply voltage and has an unregulated output of 230 VAC that can control a damper, an external status indicator, etc. This output is active as soon as the motor is enabled. The sinusoidal shape of the generated motor voltage results in an exceptionally quiet motor operation and extended service life. The special impregnated coating reduces the electrical noise from the built-in autotransformer. This series is available in different amperes. The casing of the controllers up to 7,5 A is made from high quality plastic, while the models above 7,5 A have a metal housing. This transformer doesn't need any configuration. Once installed, it's ready for use.

Osmak Rulo manufactures 5, 6, 7, 8, 9, 10, 11, 12, 14, 15 meters standard size loading conveyor belts with special damping system, also desired lengths are available upon request.The bands are manufactured with properties that can work back and forth. The upper and lower band lifting system, braking and a geared motor is used. 380 volt or 220 Volt (single phase) electrical motors used on Osmak Conveyor belts. Conveyor belt width 600 mm the standard production. However, the width of the band can be narrower or wider upon request. Please do not hesitate to contact us for more information. Custom design orders are welcome with technical drawing.

With BPS internal drain system EN - These series of professional high pressure pumps are the suitable solution, with high quality and safety standard, for all requirements to build professional misting systems with flow rates ranging from 1 up to 6 l/min with single phase electric motor. High quality components like ceramic pistons, brass head, long lasting professional seals, assure smooth operation and a long-lasting reliability. QES electrical motors assure the full efficiency with lowest power consumption and low noise operation. QES units are the best solution for applications where noise is a matter of disturb. BPS internal drain system avoids to waste water during drain cycles.

With new SSC safety system EN - These series of professional high pressure pumps are the suitable solution with high quality and safety standards to build professional misting and humidification systems with flow rates ranging from1 up to 6 l/min with single phase electric motor. All the components used in Arctic series include high quality and best materials assuring trouble less operation and long durability. Our built-in digital timer offers full control of the efficiency of the fogging system by direct adjustment of the frequency of mist spray. A built-in humidity and temperature controller grants a complete control on environment conditions and a quick and simple installation of humidification systems. QES electrical motors assure the full efficiency with lowest power consumption and low noise operation. SSC safety features avoid accidental flooding by stopping the pump in the event of leakages.

Outdoor cooling made easy EN - These series of household high pressure pumps are the suitable solution with high quality and safety standard for all requirements to build professional misting systems with flow rates ranging from 0.5 up to 0.9 l/minwith single phase electric motor. High quality components like ceramic pistons, aluminum head, long lasting professional seals, assure smooth operation and a long-lasting reliability. Our built-in digital timer offers full control of the efficiency of the misting system by direct adjustment of the frequency of mist spray increasing the advantages on water and energy consumption with savings up to 70%if compared to standard systems. This pump is suitable for small and medium outdoor cooling systems thanks to the special programming of the built-in timer that allows you to set work and pause cycles in seconds. Its automatic drain solenoid valve allows a perfect drain of the pipeline and assures optimal anti-drip system performances.

Your reference product 5ST3632 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal. How to buy To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging system or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.

Your reference product 5ST3623 is delivered from 3 days after the confirmation of your order. The exact delivery date will be indicated upon confirmation. Free delivery from 1,000 € of purchase. We deliver to France, Reunion, Belgium, Switzerland, Luxembourg, Canada, Haiti, Congo, Madagascar, Cameroon, Ivory Coast, Niger, Burkina Faso, Mali, Senegal, Rwanda, Guinea, Benin, Burundi, Gabon, Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal. How to buy To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging system or by email at contact@profelec.fr or by telephone from 8 a.m. to 5 p.m. on 01 87 65 30 80.

220v 4kw single phase input and 220v 3 phase output frequency converter/adjustable speed drive/frequency inverter/VFD 1.Output Power: 4kw 2.Rated Frequency :50hz/60hz3.Output Frequency Range