Springs for valves - Import export

1x 330mm compression handle  3x pressure pieces  20mm  26mm  34mm

3 x Extension screws (with Boll lock)  1 x Compression Bar (100mm)  1 x Spring Compressor C-clamp (297mm)  5 x Pusher adapters  16mm  19mm  23mm  25mm  30mm

Custom Valve Spring Locator by CNC Turning service, Material is 4140 steel, Finished by heat treatment to >HRC40 + black oxide. Ming Xiao Manufacturing Co., Ltd engaged in Turning Parts manufacturing more than 20 years, we have old lathe turning machines, automatic turning machines, and numerical control turning machines (CNC Lathe), we can optimize the turning processes to make the machining cost to be lowest, for high precison turned parts or with a certian accuracy required turned parts that we use CNC Lathe to produce, and low tolerance requested dimensions we use old lathe machine to produce, and small turned parts we use automatic lathe machine to produce. CNC Turned Brass Parts As a professional turning parts supplier from China,we can custom producing all kinds Carbon & Stainless steel turning parts,Copper & Brass turning parts,Aluminum Turning Parts & Machined parts.

In the kitchen, we have different products that can completely transform the preparations we make on a daily basis. If you are looking for more, the kitchen siphon is the next challenge we propose. First of all, you should know that we are dealing with a container that is safe and has a reliable mechanism that works, as long as the recommended instructions for use are followed. Preliminary tips for using the kitchen siphon It is not recommended to mix components and loads of different brands. It should not be opened if it is not empty (be sure to remove all the contents before). Cleanliness is essential for its correct operation (the parts of the silicone gasket, the spring, and the valve inside the head must be clean and wellfixed). Container it is the siphon body itself, where the mixture to be whipped is added. Tank the capacity of the siphon can be 250 ml, 0.5 liters, and 1 liter.

The reinforced version of the type 8035 sliding gate motor valve features a failsafe mechanical spring return. It is ideal where mechanical failsafe options are contained within the specification, e.g. steam and district heating systems. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature Control actuators or 3point actuators Thrust 1.2 kN; 3 kN Voltage 230 V AC, 24 V AC, 110/120 V AC

The sliding gate motor valve type 8035 features a failsafe mechanical spring return. It is ideal where mechanical failsafe options are contained within the specification, e.g. steam and district heating systems. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature . . . Control actuators or 3point actuators Thrust 1.2 kN; 3 kN Voltage 230 V AC, 24 V AC, 110/120 V AC

Valve Technology, Stainless Steel Traction force range max. 1,200 N Stroke 50 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.

Valve Technology, Stainless Steel Traction force range max. 300 N Stroke 30 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.

Valve Technology, Stainless Steel Traction force range max. 150 N Stroke 20 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.

Loosening of rusted-on connections such as screws, nuts, levers, joints or locks Non-destructive disassembly of seized or rusted-in parts such as bolts, chain links, springs, valves or hinges Advantages and benefits High effectiveness thanks to gap penetration properties Minimizing of the effort required to loosen seized parts and restoring of mobility Good lubricating properties thanks to MoS₂ Loosened parts are protected against new corrosion forming Eliminates squeaking noises Displaces moisture

1. Features There are additional high performance accessories available convenient applications - Anti-siphon Check Valves - Strainer Foot Valve - Flange Connections, Tees, Elbows 2. Precise Valve Structure The degree of precision is maximized since Double check balls or spring insert type is adopted in valve structure 3. Gas Locking Prevention - Liquid End Design minimizeds dead space. - Air Relief Valve can be provided for vaporous liquid. (optional item for KS 51~32)

Individual filled gas springs are excluded from replacement. Gas springs are maintenance-free, self-contained systems that are filled with nitrogen under high pressure. For end-of-travel damping and lubrication, a defined amount of oil is also contained inside. The gas springs contain a nonreturn valve in a threaded pin on the pressurised pipe, which allows the pushing force to be lowered at a later time. Gas pressure springs in the sizes 04/12 and 06/15 must be stored and installed with the piston rod extending downwards. As of size 08/19, storage and installation in any orientation is possible. Keep in mind, however, that end-of-travel damping is effective only when the piston rod extends downwards. As a consequence of the physical properties when filling a gas spring, a tolerance range of ±5 % results for the rated pushing force. Gas springs are filled with nitrogen under high pressure and under no circumstances should they be opened or overloaded.

Our valves are manufactured in-house and matched to the characteristics and pressures of your application. Our valves are full lift safety valves and can be spring loaded or pilot operated. All our valves are supplied set to your required working pressure up to a maximum of 4,000 bar and flow rates up to 4,700 l/min. Two versions of spring-loaded safety valves, even ATEX compliant The simpler high pressure valves have a rotatable bypass connection to dispose of leaking fluid. Pilot operated valves require a block flange. Like all other KAMAT products, these are ATEX compliant and can be manufactured in special materials to suit the medium being pumped.

The pressure relief valves GEMÜ N085 and N185 protect the plant and the piping system against gauge pressure and reduces pressure peaks. The third pipe spigot enables the valve to be installed in the main pipe. If the pressure increases, the spring is raised and the valve opens. The pressure is reduced to the preset value and can escape via the third pipe spigot into an adjacent pipe. If the pressure falls, the spring force presses the diaphragm in the direction of the seal seat and it is closed. The spring force can be adjusted as required using a set screw. - Valve adjustments can also be made under working pressure. - The optimization of piston, springs and control face ensures good control characteristics - The actuator is hermetically separated from the medium

The GEMÜ N082, N182 and N782 pressure reducers ensure that a constant outlet pressure is maintained in process plant utilizing the pressure differential.If the pressure rises on the outlet side, the spring force is lower and the valve closes as the spring is raised. The pressure is reduced until the spring force and the outlet pressure are the same. If the pressure falls, the valve opens as the spring force presses against the diaphragm surface via the control aperture. The outlet pressure can be read off a diaphragm-protected pressure gauge (not available for N782) and the spring force adjusted using a set screw as required. - The working pressure can be very easily adjusted using a set screw and secured with the integrated lock nut. If required, the setting that has been made can be lead sealed - The flow-efficient design of the valve body ensures good flow rate values - Control errors are kept to a minimum due to the large control face and the spiral spring

More info More info More info More info More info 40bar PET Compressors Select the machine The AF 40 bar Piston Oil Free PET compressor Package Turn-key installations designed to meet the most stringent standards and conditions to ensure round-the-clock operation. Complete solutions from 225 to 3200 m³/H, electric motors from 45 to 550 kW. Features Benefits Intercoolers and separators Features Hot galvanized connection piping to aftercooler inlet. Air temperature indicator on connection piping. Spring loaded safety valve on separator upper head. Air pressure indicator on separator body. Air temperature indicator on separator body. Drain valve and automatic condensate trap on separator lower head. Benefits Optimized compressed Air Quality maximum. Cooling Efficiency at each compression stage. Air Dryer Features Stainless steel flexible connections from the galvanized air receiver to the 40 bar air dryer. Stainless steel dryer with integrated 1 micron filter, dew point alarm...

L-605™ is a nonmagnetic cobalt-based chromium-tungstennickel alloy that has excellent corrosion and oxidation resistance, and high strength at both room and elevated temperatures. Through work hardening, high strength levels can be obtained. L-605™ has a minimal heat treatment response, but can be used in the cold worked and aged condition. Applications include medical implant devices, springs, valves, and engine components for the aerospace industry. As a result of its high tungsten content, L-605TM is radiopaque, which is beneficial for implant medical devices, such as stents. Because of the alloy’s high work hardening rate, only minimal reductions can be taken before solution annealing will be required. L-605TM is very resistant to oxidation and scaling at elevated temperatures, and is nonmagnetic in all conditions. L-605™ is produced by vacuum induction melting followed by electroslag remelting (VIM-ESR), and as such, has a low nonmetallic inclusion level.

Combination of air breather and water removal filter with integrated check valves to increase the lifetime of the desiccant material; particularly suited for gearbox applications Features ▪ Available in 4 different sizes with diameter of Ø68 mm / Ø2.68 in, Ø100 mm / Ø3.94 in or Ø130 mm / Ø5.12 in ▪ Equipped with spring-loaded check valves in opposing directions with an opening pressure of 0,01 bar / .15 PSI ▪ Refillable with drying agent (non-toxic ZR gel grain) or a mix of drying agent and active carbon ▪ Drying agent capable in changing colour from Red to orange with increasing moisture ▪ Without dangerous substances according to EC Council directives 99/45/EC and 2001/60/EC ▪ Replaceable air filter element SGB ▪ Connection: Male BSP thread (ISO 228) ▪ Adaptor plate ▪ Visual contamination indicator ▪ Drying agent refilling material ▪ Active carbon refilling material ▪ Replacement air filter element

Service pressure: 0-87,5 MPa Service temperature: -40°C up to 85°C Noiseless in filling and operation direction Compact design Stainless steel Ni > 13%, corrosion resistant All seals are suitable for H² EC 79 is planned The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 2-4 mm Inlet / outlet: acc. customer specifications Optional with 10µ filter

Service pressure: 0-87,5 MPa Service temperature: -40°C up to 85°C Noiseless in filling and operation direction Compact design Stainless steel Ni > 13%, corrosion resistant All seals are suitable for H² EC 79 is planned The valve is equivalent of heavy metal regulation Burst pressure: > 100 Mpa, 20° Orfice diameter: 2-4 mm Inlet / outlet: acc. customer specifications Optional with 10µ filter

General purpose type with stainless steel body and rubber seal. Electropolished body for enhanced corrosion resistance. Body and valve springs are stainless steel (SUS304, SUS316). Body is electropolished for enhanced corrosion resistance. Seal materials can be selected to suit your fluid and application, to flexibly comply with your semiconductor production process requirements. Abundant size variations allow choice to suit your application and flow rate. Each plug comes with a dust cap.

Application The K2000 cylinder head stand is designed to support automotive and motorcycle cylinder heads on a workbench so that service or repair jobs, such as valve work or head cleaning and assembly can be easily performed. Features The cylinder head clamped onto the K2000 can be rotated by 360° and may be fixed at any desired angular position. Therefore, assembly and disassembly work can be done with the cylinder head in the most appropriate position. An universal valve spring compressing lever is supplied to remove and install the valve springs.

• Seat principle, direct actuated; • Frictionless movement Spider µProp-valves are real proportional valves, in which the armature stroke is proportionally defined by the infinitely-variable current applied. The constant ratio between armature stroke and flow rate thus allows variation of the flow rate by way of the applied current. Spider µProp-valves are like Spider on/off valves microvalves The anchors installed in the micro valves have the shape of a disk. In energized status, this so-called flat armature is pulled against the magnetic yoke component group. If the coil is deactivated, the leaf spring joined to the flat armature presses the seal positioned on the spring-armature assembly unit against the valve seat. These quick-acting valves owing to the small mass of the installed armature achieve switching phases in the millisecond range. These valves have a capacity of up to 4 billion actuations, depending upon operation mode.

• Sizes: Ø 7 mm, Ø 15 mm, Ø 21 mm; • Application: Neutral and mildly aggressive liquids, gases and vapors; • direct actuated; • 2-way valves and 3-way valves, NC; Spider valves are allocated to the micro valve category (outside diameter 7 mm). The anchors installed in the micronized valves have the shape of a disk. In energized status, this so-called flat armature is pulled against the magnetic yoke component group. If the coil is deactivated, the leaf spring joined to the flat armature presses the seal positioned on the spring-armature assembly unit against the valve seat. These quick-acting valves owing to the small mass of the installed armature achieve switching phases in the millisecond range. As these valves predominantly featuring cartridge connections have an almost frictionless armature movement, they have a capacity of up to 4 billion actuations, depending upon operation mode. Spider valves may also be triggered via so-called pulse width modulation.

Application as installation explosion-proof and endurance burning proof for certain flammable liquids of the explosion group IIA with a maximum experimental safe gap (MESG) > 0.9 mm and a maximum operating temperature of 60 °C. As venting and breather device for fixed roof tanks to prevent inadmissible pressure and vacuum and to minimize gas losses by variable pressure setting of the weight-loaded and/or spring-loaded valve devices. Installation of an explosion-proof condensate drain device is possible.

EXCOR ABRIGO Corrugated Board with integrated EXCOR corrosion protection is one of the most economical VCI packaging solutions. It is frequently used for the storage and/or transportation of corrosion-sensitive components such as brake disks, crankshafts, valves and springs. Sheets of ABRIGO Corrugated Board can be manufactured as a one-sided or two-sided product and used as interleaving sheets for stackable items.

Safety Relief Valves / Blow-Off Valves WITT safety relief valves (blow-off valves) protect against overpressure by venting excess gases from pipelines, gas receivers and other equipment. The spring-loaded, direct-acting safety relief valves (blow-off valves) are suitable for individual opening pressures from 5 mbar to 45 bar (approx. 0.07 to 1 435 psi). The compact size allows easy installation in any orientation. A dust cap protects the safety relief valves (blow-off valves) against dirt. WITT safety relief valves (blow-off valves) are available in brass or stainless steel, as a ventable version, and with or without condensation outlet.

We also distribute all spare parts for breathing compressors of Coltri and Bauer: filling connector sets coupling for hose manometer up to 400 bar T- connection part Suction tube V-belt Gasket sets Safety valve Valve spring Piston pin Drive motor ..and many more