Steel rollers - Import export

Steel rollers or embossing rollers are used in the most varied or areas to transfer surfaces to various materials and to thereby give the product a high-quality character. The rollers are used to stamp aluminium film, paper, cardboard, leather and other materials.

The composite roller is up to 60% lighter than an equivalent steel roller Available with composite, aluminium and steel shell materials At R&D stage Dimensions: Composite, aluminium and steel shells Roller diameter 152 -178 mm (6” to 7”) Shaft diameter up to 60 mm (2-3/8”) Bearing 6306, 6307, 6308, 6309, 6310

close tolerances and longitudinally welded carrying roller tubes made of S235JR steel in accordance with DIN 2458; deep drawn steel bearing retainers with calibrated bearing seats pressed in from the side and circularly welded, material thickness min. s = 2.00 mm; RAL 3000 red powder coated sheath, coating thickness min. 60 U; 20 mm Ø round steel in accordance with ISO h9; single row radial steel ball bearings in accordance with DIN625 type 6204 with suitable grease filling and cover plates on both sides made of sheet steel C3 bearing clearance. The calculated service life of the ball bearings, assuming belt speed 2m/sec. delivery capacity 200 t/he bulk weight 0.75 t/m³ temperature range 0° C 50° C is 30,000 hours. Steel circlip in accordance with DIN 471 Sealing using double labyrinth seal, incl. suitable grease filling, galvanized, sheet steel sealing cap and plastic rain cap

Due to the structural characteristics of the materials of which they are made, these rollers are used for motor-driven conveyor in combined systems of handling and stockpiling of light, medium-heavy and heavy packages in normal, dusty, corrosive, and also humid and warm environments.They are made of clamped or monobloc base rollers with steel tube, crown and simple double steel pinions, aligned on the tube or at one end of the jacket.

Steel rollers with the jacket consisting of tube and bearing mounting head rigidly coupled by welding.Monobloc steel rollers are used in conveyors with medium, heavy or very heavy loads. Depending on their application, the rollers have specific shapes for connection to the structure. This need is particularly noticeable in the production of gravity and motor-driven conveyors.For the correct installation of steel idlers, refer to the “Fixing rollers to structures” section on page 11.For the correct installation of motor-driven rollers, refer to the “Fixing rollers to structures” section on page 68. The diagrams and Table 60 show the shapes of the ends of the axles envisaged in TECNORULLI production’s “Monobloc steel rollers” programme.On request, other forms of connections and rollers with hubs can be considered.

Due to the characteristics of the materials of which they are made, these rollers are used in conveyors operating in highly corrosive environmental conditions.With a state-of-the-art manufacture, they possess the requisites of the specifications for steel rollers on page 4. Operating temperature: 10 ÷ +50 [°C].

PVC-STEEL cylindrical and tapered rollers with one or two grooves rolled on the steel tube, driven by round belt links in series or individually connected to a transmission bar activated by the motor unit. PVC and PVC-STEEL rollers with flat or toothed polyamide resin PA or steel ACC pulley driven by tangential belt or belt links in series. The diagrams and tables on page 86 show the dimensional characteristics and minimum and maximum lengths of manufacture. The rollers for flat or toothed belts are produced in the following versions: with pinion integral to the jacket for continuous transport; with friction pulley for stockpiling transport and in the connection of machines operating at different speeds.

Description: cylinder round thickwall glass bottle with stainless steel roller ball and alu-plastic lid, in a premium and luxury look. Use for: mainly used as empty containers for beauty oils and perfumes. The decoration is available: clear, frosted, customized color, embossed / debossed logo, silk-screen printing, foil hot stamping etc.

Steel rollers with jacket consisting of tube and bearing mounting head rigidly coupled by pressure. They are mounted on pre-lubricated angular or radial ball bearings protected with double-labyrinth dust seals. Clamped steel rollers are used in belt conveyors with limited or medium-heavy loads. The diagrams and tables on page 34 show the dimensional characteristics and maximum loads. Operating temperature:-10 ÷ +90 [°C].

Steel rollers with jacket consisting of tube and bearing mounting head rigidly coupled by welding. They are mounted on pre-lubricated angular or radial ball bearings and protected with double labyrinth, triple labyrinth dust seals with additional watertight protection. Monobloc steel rollers are used in belt conveyors with medium, heavy or very heavy loads. The diagrams and tables on page 42 show the dimensional characteristics and maximum loads.Operating temperature:-10 ÷ +90 [°C].

Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...

Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...

1, 2 and 3 Cartesian axis linear modules with rack and pinion drive guarantee precise manipulation of loads from 10 up to 2000 kg with fast and silent functioning. Our main application fields are: robotics, palletization, production line, logistics and manufacturing machines with Cartesian axis movements. Our products stand out for their: easy and quick assembly; high quality and competitive performances; reduced and simplified maintenance; wide range of integrated solutions; possibility of customised solutions; constant technical support and CAD drawings available. Strong points include: hardened sloping tooth racks (ground on request); payloads from 10 to 2000 Kg; up to 12-m beams (longer lengths can be obtained with jointed versions), high level torsional rigidity, precise shape; precise machining of all profiles (on request: repeatability up to +/-0.05mm); hardened and ground steel guide rails, for rollers and ball slides with cage; easy installation of pre-assembled systems...

drylin® W - Advantages Dirt-resistant Weight saving Lubrication-free High speed Silent and light weight drylin® W - Advantages drylin® W - technical properties The technical properties of the drylin® W profile guide system Technical properties drylin® W - configuration Find the right profile guide system in 4 simple steps with the system and life calculation. drylin® W - configuration Single rail and housing bearing - round Sizes: 10 mm, 16 mm, 20 mm and 25 mm DryLin® W single rail and housing bearing - round Single rail and housing bearing - angular Sizes: 6 mm, 10 mm, 16 mm and 20 mm DryLin® W single rail and housing bearing - angular double rail, round Sizes: 10 mm (rail width 40 mm, 74 mm and 120 mm), 16 mm (rail width 58 mm), 20 mm (rail width 82 mm) and 25 mm (rail width 120 mm) DryLin® W double rail Guide carriage, assembled Sizes: 10 mm, 16 mm, 20 mm and 25 mm DryLin® W guide carriage, assembled double rail, square Sizes: 06 mm (rail width 30 mm), 10 mm (rail width 40 mm and 74 mm) and 16 mm (rail width 58 mm) drylin® W double rail, square Mono-slide guide carriage Size: 10 mm Mono-Slide guide Single rail and housing bearing - round, adjustable Sizes: 10 mm, 16 mm and 20 mm Linear Guides with “Turn-To-Fit” Hybrid bearing WJRM drylin® roller bearings - Roll and glide for easy movement. drylin® W hybrid bearing | roller bearing hybrid bearing double WJRM drylin® double roller bearing - Roll and glide for easy movement. drylin® W hybrid bearing double Double rail, reduced weight Sizes: 6 mm (rail width 30 mm), 10 mm (rail width 40 mm and 80 mm) DryLin® W double rail, reduced weight Hybrid carriage with rollers Size: 10, 16 mm DryLin® W hybrid carriage with rollers Stainless steel guide V4A, individual Size: 20 mm DryLin® W stainless steel guide V4A - individual Stainless steel guide V4A - double DryLin® W stainless steel guide V4A - double drylin® W slider rails/carriages drylin® W rail profiles with 3/8" threads, complete rails with Ø 10 mm through bore, with/without hand clamps DryLin® W double rail, square Gliding elements For round and angular rails. DryLin® W - Gliding elements Manual clamp Developed for simple positioning tasks. DryLin® W - Manual clamp Digital measuring system With immediate digital indication of position. DryLin® W - Digital measuring system Hand clamp for higher forces Designed for positioning tasks with higher forces. DryLin® W hand clamp for higher forces DryLin® WKMEX digital measuring system with external output drylin® WKMEX measuring system with external output DryLin® SLW - the compact* Spindle-lift tables The extremely thin unit is based on a DryLin® W profile system, and its entire length is supported. This design offers an extremely high torsional stiffening simultaneously with compact dimensions. DryLin® SLW - Compact DryLin® ZLW Toothed belt axis For quick positioning of small loads. DryLin® ZLW - Toothed belt axis Single rail and housing bearing - round Sizes: 10 mm, 16 mm, 20 mm and 25 mm DryLin® W single rail and housing bearing - round Single rail and housing bearing - angular Sizes: 6 mm, 10 mm, 16 mm and 20 mm DryLin® W single rail and housing bearing - angular double rail, round Sizes: 10 mm (rail width 40 mm, 74 mm and 120 mm), 16 mm (rail width 58 mm), 20 mm (rail width 82 mm) and 25 mm (rail width 120 mm) DryLin® W double rail Guide carriage, assembled Sizes: 10 mm, 16 mm, 20 mm and 25 mm DryLin® W guide carriage, assembled double rail, square Sizes: 06 mm (rail width 30 mm), 10 mm (rail width 40 mm and 74 mm) and 16 mm (rail width 58 mm) drylin® W double rail, square Mono-slide guide carriage Size: 10 mm Mono-Slide guide Single rail and housing bearing - round, adjustable Sizes: 10 mm, 16 mm and 20 mm Linear Guides with “Turn-To-Fit” Hybrid bearing WJRM drylin® roller bearings - Roll and glide for easy movement. drylin® W hybrid bearing | roller bearing hybrid bearing double WJRM drylin® double roller bearing - Roll and glide for easy movement. drylin® W hybrid bearing double Double rail, reduced weight Sizes: 6 mm (rail width 30 mm), 10 mm (rail width 40 mm and 80 mm) DryLin® W double rail, reduced weight Hybrid carriage with rollers Size: 10, 16 mm DryLin® W hybrid carriage with rollers Stainless steel guide V4A, individual Size: 20 mm DryLin® W stainless steel guide V4A - individual Stainless steel guide V4A - double DryLin® W stainless steel guide V4A - double drylin® W slider rails/carriages drylin® W rail profiles with 3/8" threads, complete rails with Ø 10 mm through bore, with/without hand clamps DryLin® W double rail, square Gliding elements For round and angular rails. DryLin® W - Gliding elements Manual clamp Developed for simple positioning tasks. DryLin® W - Manual clamp Digital measuring system With immediate digital indication of position. DryLin® W - Digital measuring system Hand clamp for higher forces Designed for positioning tasks with higher forces. DryLin® W hand clamp for higher forces DryLin® WKMEX digital measuring system with external output drylin® WKMEX measuring system with external output DryLin® SLW - the compact* Spindle-lift tables The extremely thin unit is based on a DryLin® W profile system, and its entire length is supported. This design offers an extremely high torsional stiffening simultaneously with compact dimensions. DryLin® SLW - Compact DryLin® ZLW Toothed belt axis For quick positioning of small loads. DryLin® ZLW - Toothed belt axis drylin® W - Advantages Dirt-resistant Weight saving Lubrication-free High speed Silent and light weight drylin® W - Advantages drylin® W - technical properties The technical properties of the drylin® W profile guide system Technical properties drylin® W - configuration Find the right profile guide system in 4 simple steps with the system and life calculation. drylin® W - configuration

Stainless steel roller followers have superior corrosion resistance. They are suitable for use in cleanrooms and environments where oil cannot be used or where water might splash.

FREE ROLLER CONVEYORS DIAMETER MM. 60 AND PITCH MM. 80 FOR PALLETS The free roller conveyors P80 are characterized by a rollers diameter of mm. 60 mm and pitch mm. 80 and are the ideal solution when handling pallets, containers with reduced base and standard pallets with cross feed. They consist of a robust structure coated steel profile, with fixable supports and adjustable feet. The rollers are of high quality made of galvanized steel. Rotation on shielded ball bearings with permanent lubrication. The roller conveyors are built according to the scale, size and characteristics of packages to be handled.

Roller conveyors extensible with metal rollers for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase.

With threephase servo drive sized according to job requirements Machine body in sturdy clean steel plate design Rollers made of highquality 63 RW tool steel, hardened and polished Pneumatic pilot release with parallel lift of upper roller, guided on gear rack Entry catenary rolls Manual edge guides Simple programming of even complex feeding cycles, Display in cleartext Manual functions for setup such as creep speed, jog mode, single feedtolength Simple memory and recall of job programs for quick changeover Mounting bracket with height adjustment via spindle or hydraulic handpump (optional motorized) Hard chromed or polyurethane coated rollers (optional with Topochrome coating for highgrip feeding) Measuring wheel system for highest feeding accuracy Stroke limitation for faster piloting Fine adjustment of upper roller and strip guiding device for thin stocks (starting at 0,1 mm thickness) Central edgeguides with hand wheel

Guide rollers are valuable to help reduce wear of and damage to high pressure hoses. Make sure to use this kind of equipment! Guide roller - upper edge, made of galvanized steel, roller diameter 225 mm.

Steel rollers for harsh environments Effective labyrinth seals and bearings Dimensions: Roller diameter 63,5 mm (2-1/2” to 8”) Shaft diameter up to 60 mm (2-3/8”) Bearings 6204, 6205, 6305, 6306, 6307, 6308, 6309, 6310, 6312

Idler roller conveyors made of a sturdy structure in painted steel, supports with adjustable and height-adjustable feet, galvanized steel rollers with rotation on shielded ball bearings. In this position a convenient and economic box holder has been installed and allows the operator to lock and fill the box in comfort. Once the filling is complete, the operator can detach the box by simply pushing it forward.

MODEL RG - FREE ROLLER-COATED DIAMETER 32 MM - PITCH 40 MM FOR SMALL AND FRAGILE PACKAGES Free rollers conveyors that consist of sturdy painted steel 2 mm thick, 50x25 mm tubular support, legs fixable on floor and adjustable in height, 32 mm diameter steel rollers coated with rubber, rotating on ball bearings (8mm axle). The versions with a width of 1000 mm consist of a 2-roller axis with central support. This solution allows to have a greater flow rate that reaches up to 90 Kg/m.

EXTENDABLE MOTORIZED ROLLER CONVEYORS SERIES REM The motorized extensible roller conveyors are designed for moving boxes and packages with flat surfaces. They are normally positioned in automatic lines and used for the accumulation of the boxes. They are equipped with legs with wheels and are easily extendable and closable. They can then be moved and stretched, taking up very little space when not in use. Series of roller conveyors with pantograph painted steel structure equipped with wheels with brakes, galvanized steel rollers diameter mm. 50, variable wheelbase based on the extension of the roller conveyor, Supports adjustable galvanized steel with height mm. 650/850, gear motors with start / stop switch (for each module). Motorized extensible roller conveyors are available in different models with width mm. 500-650-800 maximum length ranging from mm. 1400 to mm. 6900.

Infeed conveyor Steel or PVC roller, width 290 mm (RD200/3) or 407 mm (RD200/4), Roller distance 250 mm Load bearing capacity 200 kg/m, Colour RAL 7016 Availabe at total length of 1000 mm to 12000 mm Options: Plate in between the roller Vertical roller from PVC, height 120 mm Additional support instead of fixing angle Additional bracing to stable the conveyor

Economical owing to highest availability Robust and extremely low maintenance Easy handling Minimum space requirement Stainless steel configuration ASLF 'Anti-Strap-Loss-Function' Constant strap control Strap width 5 - 12 mm, either DAT 'Direct-Access-Technology' The exclusive eject function avoids strap jam Torque controlled strap tension, adjustable Upstream and downstream interlocks Conveyor speed steplessly adjustable Belt type or roller conveyor Stainless steel welding plate, low maintenance GreenTech energy concept, low power consumption High-Speed-Kit, optional Intuitive operator interface MFT 'Mono-Frame-Technology' Bundle press, optional SAO 'Safe and Open' - Safe without protection doors Bundle flow control Wear-free, energy saving direct-drive-motors Low maintenance and low wear strap arch Many specific options available, easily configurable

No coil expansion needed Selfcentering of coils through continuously adjustable coil side guides Machine body in rigid steelplate design Cradle rollers of hardened steel, driven synchronously Clockspring guard Hydraulic threading system with prebending roller and peeler wedge Hydraulic hold down arm (optional w powered endwheel) Motorized coil guides Ultrasonic loop control Cradle rollers with separate threephase motor

Gmöhling data disposal containers are available in different sizes and versions and ensure that even sensitive data and files are securely and optimally collected and disposed of in accordance with the German Federal Data Protection Act (BSDG). Material subject to data protection can be collected in our data disposal containers, also referred to as file containers, and then transported for destruction as required by law. The containers can be fitted with various locking systems as required and naturally prevent unauthorised third party access to data. We can manufacture bespoke versions according to your precise needs upon request. Just ask! Aluminium disposal containers Walls reinforced with trapezoidal ribbing Slide-down front wall for easier emptying Castor arrangement B - 2 fixed and 2 swivel castors 125 mm, non-marking solid rubber wheels in steel castor forks, with roller bearings and thread protection - 2 swivelling castors with brakes in accordance with European standard...

Gmöhling data disposal containers are available in different sizes and versions and ensure that even sensitive data and files are securely and optimally collected and disposed of in accordance with the German Federal Data Protection Act (BSDG). Material subject to data protection can be collected in our data disposal containers, also referred to as file containers, and then transported for destruction as required by law. The containers can be fitted with various locking systems as required and naturally prevent unauthorised third party access to data. We can manufacture bespoke versions according to your precise needs upon request. Just ask! Collection container in aluminium Walls reinforced with trapezoidal ribbing Castor arrangement B - 2 fixed and 2 swivel castors 125 mm, non-marking solid rubber wheels in steel castor forks, with roller bearings and thread protection - 2 swivelling castors with brakes in accordance with European standard DIN EN 1757-3 Hinged lid with...

STANDARD MODELS WITH FREE ROLLER DIAM. MM 32 - PITCH MM. 40 FOR SMALL PACKAGES Roller conveyors consist of a sturdy structure profiled in painted steel, with supports legs fixable to the floor and adjustable in height, rollers in galvanized steel with rotation on shielded ball bearings. The roller conveyors are built according to the capacity and size of the boxes to be handled.