Results for
United States
Major players in both the aerospace and nuclear power industries rely on Superior Tube for precision tubing to protect their control systems and instrumentation. Meanwhile, control and measuring devices critical to the safe functioning of nuclear reactors also require our high quality tubes. Within reactor cores, our instrumentation and control tubing encases equipment for monitoring various factors such as pressure, temperature, density differences and fuel burn up rates. It’s an extremely demanding environment where durability and reliability are absolutely critical. Superior Tube supplies instrumentation tubing in straight and coiled tube forms. The most common materials used are special grades of stainless steel and nickel alloys. Superior currently produces instrumentation tubing from up to 1.5” in outside diameter down to less than .020” OD. Please note that we have a minimum order value of £10,000.
Request for a quoteTurkey
Recuperator systems are heat exchangers that produce hot air by utilizing the energy of high-temperature waste flue gas generated in furnace systems, boiler systems and various processes. Recuperators various heating needs of facilities such as combustion air preheating and ambient heating are met and energy consumption is minimized. Compared to economizers, they have larger surface area and dimensions at the same heat capacity. They can be manufactured as finned tube and straight tube. Recuperator heat exchangers can be made from numerous materials steel, stainless steel and other special materials.
Request for a quoteGermany
Customized air-air heat exchanger for the industry (up to 1.000°C) Hot outgoing air and cold incoming air Very often hot exhaust gas gets out in the environment without any use. On the other hand cold incoming air must be lead into the production process and shall be warmed. This occurs for example very often within drying technology. In this case air-air heat exchangers can be used very efficient in heat recovery. As result you have great potential to save energy expenses. Three types of air-air heat exchangers The Anthermo GmbH delivers three types of different air-air-heat exchangers: cross-flow heat exchanger straight-tube heat exchanger flat-tube heat exchanger The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-air heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.
Request for a quoteSouth Korea
Hydrogen is an important resource that is now expanding into various fields. In particular, hydrogen vehicles require a high-pressure gas environment and have strict requirements to meet it. TRIS produces and supplies products that customers require based on the understanding of using environment. <Company Information> Tris Tube Co., Ltd is a manufacturer of precision seamless and welded tubes. The products are supplying to the various industries such as Oil&Gas, Semiconductor, Automotive, Shipbuilding, food and beverage and Gas with high pressure (Hydrogen Gas station) The products are supplied with Straight tube and Coiled tube.
Request for a quoteSouth Korea
TRIS supplies tubes of various specifications and steel grades for petrochemical plant construction. TRIS has supplied not only straight tubes but also Seamless Coiled tube with longer length. The seamless coiled tubes have many benefits with reducing welding pointsand minimized the leakage points and helping to reduce the construction period in dramatically. In 2013, TRIS developed the Seamless Coil Tube. Now, TRIS can handle various steel grades such as 904L, C-22, Incoloy825, Super Duplex etc. of Coiled Tube and Straight Tube. The longer length of Nickel alloy coiled tube is usedfor chemical injection, hydraulic control, gas detect line etc. in Oil & Gas industry. In addition to the heat exchanger tubes of TRIS of chemical plant used in severe environmentsprovide the most efficient operation conditions by stable quality control and various Ni alloys.
Request for a quoteGermany
Customized air-water heat exchangers for industrial use Three types of air-water heat exchangers Three different designs o air-water heat exchangers The Anthermo GmbH delivers three different designs of air-water heat exchangers: Finned tube heat exchangers Lamella heat exchangers Straight tube heat exchangers These heat exchangers are designed in a way, that inside the tube water or another liquid circulates. The air flows around outside the tubes or the fins/lamellas. The connection between the fins and the tube is used to enlarge the space for heat transfer between the liquid and the gas fluid. The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-water heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.
Request for a quoteTurkey
ECU 99,9 % : Electrolytic is used as copper material with a conductivity of 58, electrode in erosion, high-low current panel and busbar in substations. Among our standard products: Rod, Sheet Plate, Straight pipe, Tube Coil, Box profile, Grounding rod - plate, Roofing, Copper fittings and thin wires. Also, sheet plate measurements which do not have a standard are brought to necessary measurement by forging at desired dimensions.
Request for a quoteTurkey
ECU 99,9 % : Electrolytic is used as copper material with a conductivity of 58, electrode in erosion, high-low current panel and busbar in substations. Among our standard products: Rod, Sheet Plate, Straight pipe, Tube Coil, Box profile, Grounding rod - plate, Roofing, Copper fittings and thin wires. Also, sheet plate measurements which do not have a standard are brought to necessary measurement by forging at desired dimensions. Parts that require CU-Cr-Zr (Chromium alloy) High electricity conductivity, hardness and strength at high temperatures: Are used as point welding electrode and seam welding disc at the source of low carbon steels (Panel radiator, Gasoline warehouse, etc.) and Galvanized steel plate (Automotive and white goods), electrode holder at spot welding machines, plunger electrode at erosion machines and contact busbar at substations.
Request for a quoteGermany
The Centring Microscope ZM1 is a sturdy, optical precision instrument to be attached on machines, control devices, measuring devices and equipment. The high quality, coated optics and the complete metalic design ensures a high durability. Eyepiece with diopter compensation and crosshair with concentric circles Straight tube, 45° or 90° image redirection available Versions with prism for image erection Special designs are available upon request.
Request for a quoteNetherlands
300 PSI 1 x compression tester 1 x rubber hose (45cm) 4 x spark plug adapter 1 x straight pressure tube (15cm) 1 x angled pressure tube (15cm)
Request for a quoteGermany
Spirit levels are tools commonly used in construction, woodworking, and other fields where accurate leveling is important. They consist of a straight bar or tube filled with liquid (usually alcohol) and a bubble. When the bubble is centered between two lines marked on the tube, it indicates that the surface being measured is level. The Ronix RH-9417 spirit level is simple and easy to use, requiring no batteries or AC power. It is compact and lightweight, making it easy to carry and use in tight spaces. It also features level bubbles that accurately measure horizontal, vertical, and 45° tilt angles. The level is durable and impact resistant due to its aluminum housing. Plus, this practical hand tool is easy to read with clear, visible level bubbles.
Request for a quoteChina
Are you looking for a golden aluminum mascara tube? This straight aluminum mascara tube square is manufactured with an oxidized aluminum cover. Also, this square tube includes an internal brush for customers' convenience. The golden decoration provides a luxury vibe to the product image. However, it is also capable of applying other decorations.
Request for a quoteGermany
The GEMÜ PFA tubing range comprises tubing spools and straight tube pieces. These can be supplied either in a high-purity version with Teflon® PFA 450 HP (DuPont) or in the standard version. Depending on availability, the latter uses PFA M620, Dyneon 6502T or Daikin MP-230. The tubes are available in standard lengths as rolls (10 m, 20 m, 50 m, 100 m) and 6 m tube pieces. The following sizes can be ordered: 1/4", 3/8", 1/2", 3/4", 1", 1 1/4". Other sizes and lengths (min. 110 m overall length) are available as special versions. Advantages: — High-purity version complies with SEMI F57 and has FDA approval for food-related applications — Excellent pressure resistance and high flexural fatigue strength — Suitable for temperatures up to 170 °C.
Request for a quoteGermany
Sensor for bulk mass flow Whilst the OPTIMASS 2000 has been developed to meet the demanding custody transfer requirements of the Oil & Gas industry, it is well suited to bulk measurement in many applications. The option of Super Duplex (UNS S32750) provides a maximum operating pressure of 180 barg / 2610 psig. The newly launched OPTIMASS 2000 S400 meter with the innovative four straight tube design is with a max. flowrate of 4 600 t/h / 169 000 lb/min the highest capacity Coriolis mass flowmeter in the world. OPTIMASS 2400 with EGM™ (Entrained Gas Management): the meter maintains operation over a wide range of gas fractions and complex flow conditions.
Request for a quoteGermany
Sensor with extension tube for screw-in The OPTITEMP TRA/TCA-S12 is a temperature assembly for screw-in. It is predominantly used in the lower temperature range (up to +150°C / +302°F). When it features a neck tube, spatially separating the process connection from the connection head, the connection head cannot heat up as much. This is particularly important when there is a temperature transmitter in the connection head. Form acc. DIN 43772: Form 2G Design: DIN-style, welded, multipart thermowells Process connection: threads: G 1/2, G 3/4, G 1, 1/2" NPT and 3/4" NPT Neck tube connection: with fixed neck tube Tip design: straight tip Diameter: Ø 9, 10, 11 and 12 mm
Request for a quoteGermany
Sensor with flange and extention tube The TRA/TCA-F13 is a flange temperature assembly. The main field of application is in tanks or pipelines and a weld neck flange is used to connect them; the particular advantage to this type of thermometer is that they can be coated (e.g. with PTFE), making them resistant to aggressive media. Form acc. DIN 43772: Form 2F Design: DIN-style, welded, multipart thermowells Process connection: flanges: DN25/PN40, DN50/PN40, ANSI 1/2", 1" and 1 1/2", 150 and 300 lb Neck tube connection: with fixed neck tube Tip design: straight tip Diameter: Ø 9, 10, 11 and 12 mm
Request for a quoteChina
This product is a double-layer oval screw cap combined with an extruded tube with straight-stripe tail. The straight-angle double-layer design adds a luxury sense to the cap while the rotation stopper at the tube shoulder allows tighter closure of the cap. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for cleansing,lotion, hand cream, sunblock, etc.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
United States
Superior Tube supplies high pressure tubes that exceed current industry standards and we supply high quality products that are used in oil and gas extraction, high pressure liquid chromatography, military applications, water jet cutting, and more. Our tube mill manufactures high pressure tubing in straight lengths, and in a variety of corrosion resistant austenitic, nickel alloys, and stainless steels. Sizes run from 0.050” right up to 1.250” outside diameter, with wall thicknesses between 0.0175” and 0.218”. Operating conditions can require our products to be service rated above 60,000psi operating pressure, with tensile strengths greater than 220ksi. Please note that we have a minimum order value of £10,000.
Request for a quoteFrance
Designed with a modular system of superimposed cubes, the Aérial range offers play spaces at monumental heights to children from 6 years old. Its geometric lines and bright colors give it a modern and bright aesthetic. In spite of its imposing appearance, the polycarbonate panels associated with compact laminate or barred grills that make up its structure, provide transparency, light and a sense of vertigo through its aerial aspect. Lookouts allow children to enjoy the panoramic view in complete safety and the new transparent tunnel passage allows them to see what is happening under their feet at a height of more than 4.50 meters! To go back down, all they have to do is slide down the straight or spiral tube slides of impressive length! The access to the upper levels is done by a series of horizontal and vertical nets to climb.
Request for a quoteGermany
This extra-long collar can be used to seal up an anchorage point on a synthetic roof surface. The collar is 300 mm long and available in two models - for anchors with or without an additional supporting tube (Ø 16 oder Ø 42 mm). The disc is 420 mm in diameter. Practical notches make light work of shortening it. Suitable for PVC, PP and PE roof surfaces Suitable for Ø 16 and 42 mm supports Extra-long: 300 mm Notches cut into the surface every 20 mm allow the tube to be shortened in a straight line Incl. shrink tubing Disc diameter: Ø 22 cm
Request for a quoteGermany
These particularly long sealant collars were specially designed for sealing up anchorage points on a bitumen roof surface. They are 300 mm long and available in two models: For anchors with or without an additional supporting tube (Ø 16 oder Ø 42 mm). The discs are 420 mm in diameter. The collars have also been marked with a series of practical notches which make it easier to shorten them. Sanded or slated - for bitumen roof surfaces Suitable for Ø 16 and 42 mm supports Extra-long: 300 mm Notches cut into the surface every 20 mm allow the tube to be shortened in a straight line Incl. shrink tubing Disc diameter: Ø 420 mm
Request for a quoteUnited Kingdom
Snaps on to standard hydraulic couplers enabling connection and release from difficult to access grease nipples. 8mm OD x 100mm Straight Tube with 8mm Concave Connector. Part No. 32 405 92
Request for a quoteGermany
The major difference between our standard capillaries and conical capillaries lies in the different opening diameters on both ends. Whereas standard capillaries are manufactured with the redrawing-method conical capillaries are produced in a discontinuous process. Materials Soda-lime glass (AR, I860, PH360 etc.) gamma sterilized soda-lime glass Borosilicate glass (DURAN©, PYREX©, SIMAX© etc.) Neutral glass (FIOLAX© and DUROBAX©) Aluminum silicate glass (Schott 8252/8253) Lead glass (lead content up to 28%) Sealing glasses for various metals such as: kovar, molybdenum, steel, silver, platinum, palladium Process of Production During the production process of the conical capillaries a straight tube or capillary is heated and drawn. By drawing the capillary a pointy conical, tapered form, a so-called double-tip, is formed. The tip can be parted in the capillary’s smallest diameter and results in a larger diameter on one side which is determined by the blank used in the process, as...
Request for a quoteGermany
Non-contacting speed sensor type FA54 withNon-contacting speed sensor type FA54 with aluminium flange and stainless steel sensor tube. Due to its design and its approvals especially suitable for the shipbuilding industry. Robust and high quality housing: IP68 pressure-tight Excellent vibration and shock resistance High degree of EMC immunity for difficult electrical environment Connection outlet straight or lateral; with protective tubing on request Up to four output signals, on request available with one status signal for rotational direction detection, on request with two galvanically isolated output signals
Request for a quoteGermany
Non-contacting multi-channel stainless-steel speed sensor, difference-Hall principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Optionally with current output signal. Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed).
Request for a quoteGermany
Non-contacting multi-channel stainless-steel speed sensor, eddy current principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Scanning of all electrically conductive materials (steel or aluminium). Insensitive against mechanical abrasion (metal chips). Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed).
Request for a quoteGermany
Non-contacting multi-channel stainless-steel speed sensor, difference-Hall principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Up to 4 galavanically isolated measurement channels Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed).
Request for a quoteResults for
Straight tubes - Import exportNumber of results
35 ProductsCountries
Company type
Category