Lifts - Import export

The EV-300 electro-pneumatic lifting beam is an autonomous device intended for handling any glass on site or workshop.

Activated in a few seconds on site Very robust compact construction •Invertable fork with adjustable width Two Ø 200 mm wheels for easy transport on site • Base equipped with 2 stabilizing arms • Feet with adjustable height wheels Lifting cable anti-torsion in very high resistance steel Level for perfect control of the position of the feet Lifting winch with automatic brake • Steel pulleys on bearings

It is an autonomous device thanks to its battery power supply and with its supplied equipment it is also a versatile load lifter for construction site or workshop.

"for workshop or construction site allows you to Transport, Handle, Turn over any glass surface from floor to ceiling. It can be used with our EV 300 electro-pneumatic lifting beam. Very compact construction. For very easy transport on site, it is possible to assemble it on the site of use"

BD 400 is the universal portable electric lift for raising glass or windows Thanks to its unique construction, lifting loads as close as possible to a wall is also possible. It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use.

for raising the height of glazing on a veranda roof. Portable device for immediate action on site.

for transporting, lifting and rotating glass panels with virtually no physical effort. Put into action in just a few seconds on site.

"The DW 380 manual plate lifter reduces labor costs It allows a single person to install plasterboard on the ceiling or under the roof. Thanks to its unique construction (patent pending), it can be transported on site like a suitcase. Activated on site in 30 seconds"

Universal portable manual lift suitable for all vertical lifting for safe work thanks to its special anti-twist mast and its offset winch with automatic brake.

Versatile portable load lifter for any construction site or workshop. For easy transport in the vehicle folds in seconds

Folding hand truck for use in any vehicle, workshop or office. This versatile elevator or vertical load lifter will always have its place to move and translate any load effortlessly.

Portable electric plate lifter for raising any plasterboard or placo up to a height of 5.2 m. Avoids physical fatigue and is 10 times faster than a manual plate lifter.

BD 400 is the universal portable electric lift for raising heavy loads safely. Thanks to its unique construction, lifting loads as close as possible to a wall is also possible It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use. Mast with aluminum anti-twist rails Only 2 elements: the elevator and the lifting accessory Immediate use on site, activated in a few seconds without tools 230 V single-phase electric motor with speed variator Possible use in the event of a power outage using the crank provided (or battery-powered screwdriver) Integrated torque limiter, cuts off lifting in case of overload Easy transport on site thanks to transport wheels Stabilizer with adjustable length wheels By design, the feet are placed in front of or behind the mast (for facade work)

CA 400 P - Universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct or other load Load capacity 150 kg - Lift height 4 m Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided

CM 520 - Portable electric lift, load capacity: 140 kg up to 3 m 130 kg at 4 m 90 kg at 4.9 m Low weight portable device - only 38 kg Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V single-phase electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power outage using the supplied crank or screwdriver on batteries

"CM 340 universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct, awning, pergolas or other load Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided.

The lifting column for industrial and assembly tables The lifting column SQ consists of a colorless anodized aluminium profile with a cross-section 45x45 mm. The stainless steel tube is guided in a plastic bushing and is moved by a spindle drive. Up to four lifting columns can be connected to a control box and operated synchronously. There are T-slots on 2 sides of the leg (width 8mm). These allow the mounting of crossbars and attachments along the entire length of the column. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

For spindle driven workplaces and tables Set up ergonomic workplaces for diffrent areas with the elegant spindle lifting column SL. It is used for assembly tables, in assembly systems, for mechanical engineering, height adjustable beds and massage tables. The column SL consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each column has an internal motor that drives the threaded spindles. These are driven synchronously by the control unit. The T-slots on 3 sides (width 8 mm) allow the connection of crossbars, shelves, attachments and mountings along the entire length of the column. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

High loads with small dimension The housing of the linear units SLA and SLG are made out of colorless anodized aluminium profiles with dimensions 35x35 mm (SLA) or 45x45 mm (SLG). Up to 4 linear units can be connected to one control box and are operated synchronous with a hand switch. The systems SLA and SLG are used in applications which need ergonomic height adjustable work surfaces. Especially existing work stations can be retrofitted with linear units. The dimensions 35x35 mm and 45x45 mm fit perfectly in steel profiles 40x40 mm or 50x50 mm, which are often used as carriers and legs for work stations. Compared to to the linear unit SLA, the SLG can withstand higher bending moments and is more stable. We recommend the SLA and SLG linear unit for industry, furniture and catering. The following accessories are available: mounting plates adjustable rubber foots aluminum feet castors tube fitting (only for SLA)

Elegant and mobile The lifting castor HR combines the benefits of a castor and a levelling foot. Through the simple rotary motion of the hand crank the hydraulic oil is pressed out of the pump and flows through the hydraulic tubing into the connected lefelling foot. Mobile work and transport equipment can be fitted with the lifting castors and be converted into stable working surfaces. Up to 10 lifting castors can be driven by one hydraulic pump. The standard system consists of 4 lifting castors. Order lifting castors online

Universal and compact The linear unit is both a compact and sturdy lifting element. It consists of a linear guide with cylinder. It is installed directly in or on the existing object. This means that several tables and devices can be easily fitted with a single lifting system. The linear units LA, LD and LG can be mounted with the four M5 threads on the profile or using separately available mounting plates. The Dimension 45x45 mm of the new linear unit LG fits perfectly in steel profiles 50x50 mm. The linear unit LG can withstand higher bending moments and is more stable than the linear unit LA with dimension 35x35 mm. The linear unit LH provides the stability and smooth running of the table leg TA. It is mainly used in place of the linear unit LA when large lifting distances are required. Accessories

Powerful and quiet Our Pumps The pumps PA, PB and PF represent the heart of our adjustment system. The pump PF with ist size of 65x60 mm is in comparison with the standard types PA and PB a very compact aggregate. Thanks to the flexible hose and minimum space requirements, the pumps can be installed in any position and even outside your system. This means that they can also be installed in very slim or complex units. The pumps lift weights of up to 800 kg – quietly, steplessly and completely in sync. They are powered by an electric drive unit or hand crank. Simple and convenient Our drive Systems Our pumps can be operated with a hand crank or an electric drive unit. Your choice will depend on the desired level of convenience and on price considerations. Different heights can be memorized and automatically selected. The table height is shown digitally. There is also an extensive range of accessories available (IR remote control, crush protection strips, battery operation,...

High loads with small dimension The housing of the linear units SLA and SLG are made out of colorless anodized aluminium profiles with dimensions 35x35 mm (SLA) or 45x45 mm (SLG). Up to 4 linear units can be connected to one control box and are operated synchronous with a hand switch. The systems SLA and SLG are used in applications which need ergonomic height adjustable work surfaces. Especially existing work stations can be retrofitted with linear units. The dimensions 35x35 mm and 45x45 mm fit perfectly in steel profiles 40x40 mm or 50x50 mm, which are often used as carriers and legs for work stations. Compared to to the linear unit SLA, the SLG can withstand higher bending moments and is more stable. We recommend the SLA and SLG linear unit for industry, furniture and catering. The following accessories are available: mounting plates adjustable rubber foots aluminum feet castors tube fitting (only for SLA)

Strong and slim The cylinders are the basic elements of all our hydraulic linear units and table legs. They consist of a brass tube and have a piston rod made of stainless steel. Thanks to perfected technology and precision work, our cylinders guarantee a quiet, fast and precise lift for height and tilt adjustment. With diameters of 16 and 20 mm, the slim hydraulic cylinders fit perfectly in narrow guides and existing applications. Up to ten cylinders can be controlled simultaneously. This allows the realisation of very complex designs.