Steel - Import export

The new CNC milling machines with vertical center with 3 and 5 axis machines give us a possibility to produce complex details with excellent quality. We work usual steel, stainless steel, aluminum, cast iron, brass. The maximum dimension of detail is 1200x600x600 mm, by 5 axis work ф320 mm. The maximum weight of the product is 1000 kg. The company possess universal milling machines, which are used for production of details with small series, repair of instruments, producing of single pieces

We specialise in CNC precision machining of metal alloys, composites and industrial plastics, as well as welding, for the production of parts for a wide range of industrial applications, with project development and assembly if required.

Up to 4500 Kg net depending on technical drawing

from 50 kgs up to 5 tons net depending on technical drawing.

Mercury steels are a set of steels that are hardened with water suitable for the construction of tools such as twist and dental drills, Guides, Drift punches, Countersinks , Center drills, Rasps, Hole punches, Metal saws, Drawing punches and all sorts of staples, connecting tab and similar tools.

TIG WELDING WIRE 12.64 1.6MM 1KG Copper-plated welding wire 12.64 with increased content of Si-Mn components. The binder provides higher weld strength and resistance to contamination of welded elements. It also promotes low sensitivity to surface contamination and contributes to smooth, solid welds. Used e.g. in construction, manufacturing and shipbuilding. TECHNICAL DATA: Wire diameter: 1.6mm Weight: 1kg Wire type: 12.64 Bar length: 1000mm

Wrapped spring steel plain bearing | Requires maintenance | DIN 1498 | DIN 1499 FER-MET® is a spring steel plain bearing without integrated sliding material. Lubrication of the bearing point is necessary. Very high load capacity and impact resistance for heavy-loaded applications with impact loads. Very wear-resistant. A standard gap design with a straight slot and without chamfer inside [EG], but can also be manufactured with other slot shapes if required. For technical details, please visit the product page on our website!

Regrinding, repainting and remachining The flexible, but also durable, secutex – buffer pad provides reliable protection from expensive damage to your highvalue goods. Often the solution is paramount. Thanks to the integrated perforated plate, secutex – buffer pad can simply be bolted or welded. secutex is a highly wear resistant polyurethane, which was developed 30 years ago for lifting sharpedged components. In the years that followed, new solutions for materials protection and noise reduction were regularly constructed. Thus, today almostall bricks in Europe are moved using secutex protective coatings. secutex protection is almost the industry standard for the lifting and storage of sharpedged metal sheets. For us, health and safety at work is even more important than the prevention of damage to materials. Our expert advisers can present a number of innovative solutions to you whereby, using secutex – buffer pad, noise is prevented directly at source.

CNC Milling steel base

Hand riveters are essential tools for anyone who needs to join two materials together permanently. These tools work by compressing a metal rivet through two or more layers of material, creating a secure and permanent bond. Hand riveters are used in a wide range of industries, including construction, metalworking, and automotive repair. They are especially useful when working with materials that cannot be easily welded or screwed together. Equipped with 4 heads of different sizes, Ronix RH-1604 is ready to help you in your next repair or maintenance work.

ASTM 1066 High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-mechanical Controlled Process (A1066 Gr. 50, A 1066 Gr. 60, A 1066 Gr. 65, A 1066 Gr. 70, A 1066 Gr. 80) EN 10208-1 Steel pipes for Combustible Fluids, pipes of Class A (L210GA, L 290 GA, L 360 GA) EN 10208-1 Steel pipes for Combustible Fluids, pipes of Class B (L245NB, L 415NB, L 245MB, L 555MB, L 360 QB, L 555 QB) API Spec. 5 L/ISO 3183 Steels for Line pipes PSL1 Gr.A (L210) – X 70 (L485) API Spec. 5 L/ISO 3183 Steels for Line pipes PSL2 Gr.BN (L245N) – X 60N (L415N) Gr.BQ (L245Q) – X 56Q (L390Q) X60Q(L415Q) – X80 Q (L555Q) Gr. BM (L245M) – X80M (555M) X90M (L 625M), X100M (L690M)

A/SA 36, A/SA 283 Gr A/B/C/D, A 514 Gr B, A 514 GR H, A 529 Gr 50, A/SA 572 GR 42, A/SA 572 Gr 50, A/SA 572 GR 55, A/SA 572 Gr 60, A/SA 572 GR 65, A 573 GR 58, 65, 70, A 588 GR A/B, A 633 GR A/C/D/E, A 709 GR 36/50, A 709 GR 50 W, A 709 GR 100…

We can supply pipes for the construction of pipelines, equipment and tanks subject to low temperatures as Seamless or welded pipes, hot rolled or cold finished. Pipe norms suitable for low temperatures are according to; ASTM A 333 / ASME SA 333 (seamless and welded pipes) EN 10216-4 (Seamless pipes) EN 10217-4 (Welded pipes)

Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & AlSn20Cu | Low-maintenance | DIN 1494 / ISO 3547 For high sliding speeds, optimum sliding behaviour with good lubricant supply. BIV-MET®/A is a composite sliding bearing requiring maintenance; oil or grease lubrication is needed. For technical details, please visit the product page on our website!

Solid, turned, grinded and hardened steel plain bearing | Requires maintenance FER-MAS® is a steel plain bearing without integrated sliding material. Good lubrication is required! Suitable for highest loads, insensitive, long service life. For technical details, please visit the product page on our website!

Made of brass, steel, stainless steel

Wrapped composite sliding bearing with lubrication pockets/ copper-plated steel & CuSn10Pb10 | Low-maintenance | DIN 1494 / ISO 3547 BIV-MET® is a low-maintenance bronze plain bearing. However, initial lubrication is required—both oil and grease lubrication are possible. Due to the lubricant depots, the relubrication intervals are greatly reduced! For high loads and oscillating movements as well as for rough operation and temperature load. For high load capacity and oscillating movement, as well as for rough operation and temperature load. Long-run lubrication because of lubricant storage. For technical details, please visit the product page on our website!

Production standards are summarized as below for Cold Formed Sections; Water and gas pipes: EN 10217-1 TR1, EN 10255, DIN 2440, BS 1187, ISO 65, N FA49-145, ASTM A53, ASTM A500, DIN 2999-2986, BS 1387, ASTM A53 Industrial Pipes: DIN 2458-1615 & 1626, BS 6363, BS 6323, BS 1139, EN 39, EN 10219-2 Open Sections: EN 10162 Square and Rectangular HS: EN 10219-2, DIN 2395, DIN 59411, BS 6363, N FA49-541, ASTM A500, UNE 36-537, SI 1458 For Hot Formed Sections as per EN 10210/ASTM A501.

Rolled composite plain bearing | Maintenance-free | Steel / graphite bronze | With embedded solid lubricants GAP-MET®/S is a maintenance-free composite plain bearing. However, oil or grease lubrication is possible. High load capacity and strength, for all slow movement types, suitable for contaminated environments, no moisture absorption, good chemical resistance. For technical details, please visit the product page on our website!

We supply patterned plates (tear drop and diamond patterns ) that are produced for creating a non-slip metal surface that are used at fire-escape stairs, walking lines, ramps, machinery, wet floors of ship and shore side premises or vehicle, trucks and lorry’s haulage, stairs, doors of cupboard, and covering of outer facade or floor. Production from 1,50 mm to 16,00 mm thickness from 1000 mm to 1500 mm width is the most common requirements and supply. Expanded Steel Sheets that are from the expansion of hot steel rolls, generally are preferred for places where the weight of the patterned sheets have to be minimized. By their lightweight characteristics, generally are used in ship building industry, walking lines, door or complete generator boxes, partition walls, ceiling coverings, pipe and cable cover system, truck haulages, fences, platforms and military structures.

We supply from the productions and our stocks ; the galvanized flat steel that is hot-dipping of cold- rolled metal through a zinc bath where both surfaces are coated with layer of zinc applied in order to enhance material lifespan and prevent corrosion which will eventually occur on the material surfaces in the presence of water or air moisture. Hot Dip Galvanized Steel Coils and / or Sheets Cut From Coils, Zero Spangle, Chromated, Unoiled Acc. to EN 10346/EN 10143 Drawing Steel Grades; DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z Structural Steel Grades; S220 GD+Z, S250 GD+Z, S280 GD+Z, S320 GD+Z, S350 GD+Z.. Coating Thickness from 50 gr/m2 to 300 gr/m2 Thickness from 0,2 to 4 mm. “Please contact with our Sales Department for the current Stock Delivery Options for DX51D+Z275 Sheets/Coils”

Flat steel products in roll or sheet forms obtained by cold-rolling of hot-rolled flat steel, with thicknesses ranging from 0.20 to 2.00 mm. meeting the expectations concerning the surface flatness and the width and thickness variation and the physical properties of the produced materials fully remain homogenous. Common Grades; As per EN 10130 DC01/DC03/DC04 , ASTM A619/DQ, SAE 1010 /1008/1006

EN 10025 1-2-5 Non Alloyed Steel Products for Structural uses S 185 JR, S 185 JO, S 185J2, S 185 K2, S 235JR, S235JO, S235J2, S 235K2, S 275JR, S 275JO, S 275J2, S 275K2, S 355JR, S 355JO, S 355J2, S 355K2, S 355JOW, S 355JOWP EN 10149 1-2-3 / SEW 092 Hot Rolled Steel Products with a High Yield Quality for Cold Forming S315MC, S 355MC, QSTE380TM, S 420MC, S 460MC, S 500MC, S 550MC, S 600MC, S 700MC, S 260NC, S 315NC, S 355NC, S 420NC EN 10111 Hot Rolled Steel Products with a Low Carbon Content for Cold Forming DD11, DD12, DD13, DD14 Non Alloyed Steel Products with Surface in Relief (tear-drop and chequered pattern sheets)

Applications Pipes for the construction of pipelines for water, liquid hydrocarbons, natural gas and for the construstion of chemical and industrial plants, refineries etc. Norms Line pipes are according to the following norms: API 5L (ISO3183) (seamless and welded pipes) ASTM A53 / ASME SA53 (seamless and welded pipes) Manufacturing methods Seamless pipes, hot rolled or cold finished with following heat treatment: ERW pipes up to dia 24" and SAW pipes for the other sizes.

The different kinds of cold drawn tubes ready on stock cover a wide range of applications: COLD DRAWN SEAMLESS AND WELDED TUBES SUITABLE FOR HONING. COLD DRAWN SEAMLESS AND WELDED TUBES INSIDE H8. COLD DRAWN SEAMLESS TUBES FOR SHAFTS. WELDED SMOOTH BORE CYLINDER TUBES INSIDE H9 OR H10. COLD DRAWN SEAMLESS TUBES FOR HYDRAULIC AND PNEUMATIC POWER SYSTEMS. Seamless and Welded Cold Drawn pipes honed or ready for honing; H8, H9 or H10. STEELGRADES AND DELIVERY CONDITIONS COLD DRAWN / HARD (+C acc. EN 10305 / BK acc. DIN 2391) No heat treatment after final cold drawing. COLD DRAWN / SOFT (+LC acc. EN 10305 / BKW acc. DIN 2391) The final heat treatment is followed by a suitable drawing pass (limited reduction of area). STRESS RELIEVED (+SR acc. EN 10305 / BK+S acc. DIN 2391) After the final cold drawing process, tubes are stress relieved in controlled atmosphere in order to reduce work hardening due to the cold forming process. ANNEALED (+A acc. EN 10305 / GBK acc. DIN 2391) After...

The round tubes are manufactured from a coil that is bent and electric resistance welded (ERW). The forming process can be according to EN 10210, which foresees hot forming or cold forming followed by heat treatment, or according to EN 10219, which foresees cold forming without following heat treatments. The finished product is fully killed and welding seam bead is inside and outside trimmed. These products are used to manufacture both welded and bolted structures, in the field of constructions, engineering, industrial constructions, transports, automotive, agricultural machinery and earth moving machinery. The cold finished tubes are particularly suitable for structures at sight or for aesthetical uses, thanks to the surface aspect typical of cold forming. NORMS HOT FINISHED” TUBES EN 10210-1/2 COLD FINISHED” TUBES EN 10219-1/2 INSIDE TRIMMING EN 10217

The round SEAMLESS tubes are hot rolled and satisfy both the requirements of the norm EN 10210 for structural applications and EN 10297-1 for mechanical applications. These steel tubes are fully killed and are suitable for structural applications but with the possibility to reach up to 100 mm w.t., which is impossible for welded tubes. These tubes are used for the manufacture of various kinds of construction components, above all where heavy wall thickness are required. EN 10210-1/2 (structural applications) EN 10297-1 (mechanical applications)

As per the norm EN 10297 specifies the technical delivery conditions for seamless round steel tubes. The tubes for mechanical applications are mainly used in those processes in which turning and CNC machines are used. The wide size range available, with OD from 21.3 to 812 mm, gives the possibility to manufacture several kinds of components for different applications: small machine parts, flanges, fittings, Archimedean screws, hydraulic cylinders for heavy machines etc.