Thinning - Import export

ANTICORROSIVE of COSMOCHROME is a high quality rust primer produced with excellent european materials. It is an ideal primer undercoat for the protection of all metallic surfaces from rust. It is suitable for interior and exterior use. Applicating easy with brush or spray gun. Thinning 10% with white spirit or turpentine for use with brush and 20% for use with spray gun.

Knight Optical’s Laser Optics range include Thin Film Polarisers which separate the s- and p-polarised light with negligible absorbance within the coating for low loss performance. The laser thin film polarisers are optimised for 515nm and 1030nm design wavelengths, ideal for Ytterbium (Yb) doped lasers including diode-pumped solid-state lasers (DPSSL) and fiber lasers, as well as Nd:YAG lasers emitting at 1064nm. Currently, we stock thin film polarisers which work at either 45° or at Brewster angle (55.4°), both of which have been coated using ion beam sputtered (IBS) technology, creating a compact and durable coating, with a LIDT suited for ultrafast laser applications. Often used within a laser resonator to separate the different polarisation states and can be used as an alternative to polarising beamsplitter cubes or Glan-type polarising prisms. The following are the tolerances for the laser polarisers:

Experience the versatility and durability of our high-quality PEEK Thin Sheet/Plate. Available in various thicknesses, including 0.5mm, 0.6mm, 0.8mm, and 1.0mm, these thin sheets are designed to meet the demands of a wide range of applications. PEEK (Polyetheretherketone) is renowned for its exceptional properties, including high temperature resistance, chemical resistance, and mechanical strength. Whether you need a thin sheet for electrical insulation, aerospace components, or medical devices, our PEEK Thin Sheet/Plate delivers reliable performance. The precise manufacturing process ensures uniform thickness and smooth surface finish, allowing for easy fabrication and excellent dimensional stability. Its lightweight nature makes it a preferred choice in weight-sensitive applications without compromising on strength.

Micelles in the shampoo help to deeply cleanse the scalp without overdrying. The shampoo contains a rich formula of natural oils and plant extracts that restore the hydro-lipid balance of the scalp and protect it from the harmful effects of the environment. INGREDIENTS: Aqua, Cocamidopropyl Betaine, Sodium Coco-Sulfate, Decyl Glucoside, Xanthan Gum, Sodium Chloride, Polyquaternium-7, Tilia Cordata Flower Extract, Sodium Hyaluronate, Panthenol, Parfum, Benzyl Alcohol, Methylchloroisothiazolinone, Methylisothiazolinone, Glycerin, Trehalose, Urea, Serine, Pentylene Glycol, Glyceryl Polyacrylate, Algin, Caprylyl Glycol, Pullulan, Disodium Phosphate, Potassium Phosphate, Citric Acid, Amaranthus Caudatus Seed Extract, Rosa Canina Fruit Extract, Allantoin, Camellia Sinensis Leaf Extract.

The conditioner intensively nourishes and moisturizes hair. The active ingredients in the conditioner - linden extract and flaxseed oil - give dull hair strength and natural lively shine, strengthen it and visibly lift it at the roots. INGREDIENTS: Aqua, Cetearyl Alcohol, Dipalmitoylethyl Hydroxyethylmonium Methosulfate, Ceteareth-20, Cetrimonium Chloride, Tilia Cordata Flower Extract, Polyquaternium-7, Sodium Hyaluronate, Glycerin, Trehalose, Urea, Serine, Pentylene Glycol, Glyceryl Polyacrylate, Algin, Caprylyl Glycol, Pullulan, Disodium Phosphate, Potassium Phosphate, Parfum, Sorbitan Caprylate, 1. 3-Propanediol, Benzoic Acid, Disodium EDTA, Amaranthus Caudatus Seed Extract, Rosa Canina Fruit Extract, Camellia Sinensis Leaf Extract, Ascorbic Acid, Allantoin.

It gives hair volume and shine, provides easy combing and styling. Grape seed oil is easily absorbed into the hair shaft without weighing it down, moisturizes and softens the hair, protects against dehydration. The balm prevents brittleness and split ends, moisturizes and gives silkiness. HOW TO USE:apply to clean, damp hair along the entire length, rinse with water. INGREDIENTS: Aqua, Cetearyl Alcohol, Cocos Nucifera Oil, Glycerin, Cetrimonium Chloride, Olea Europaea Fruit Oil, Cyclopentasiloxane, Dimethiconol, Dimethicone, Glyceryl Stearate, Ceteareth-20, Ceteareth-12, Cetyl Palmitate, Behentrimonium Chloride, Sodium Hyaluronate, Vitis Vinifera Seed Oil, Olus Oil, Tocopherol, Allantoin, Palmitoyl Hexapeptide-19, Laminaria Saccharina, Amorphophallus Konjac Root Extract, Propylene Glycol, Fucus Vesiculosus Thalle Extract, Parfum, Triethylene Glycol, Benzyl Alcohol, Methylchloroisothiazolinone, Methylisothiazolinone.

Provides delicate hair cleansing, normalizes pH, prevents dandruff. Salicylic acid deeply cleanses the skin. The shampoo is enriched with intensive moisturizing ingredients that enhance hair density and protect against dryness and breakage. DIRECTIONS FOR USE: Apply a small amount of shampoo to damp hair, lather, rinse with water. Repeat if necessary. INGREDIENTS: Aqua (Water), Sodium Laureth Sulfate, Cocamidopropyl Betaine, Glycerin, Cocamide DEA, Disodium Laureth Sulfosuccinate, PEG-7 Glyceryl Cocoate, Polyquaternium-7, Sodium Hyaluronate, Palmitoyl Hexapeptide-19, Allantoin, Salicylic Acid, Fucus Vesiculosus Extract, Laminaria Saccharina Extract, Propylene Glycol, Sodium Levulinate, Sodium Anisate, Amorphophallus Konjac Root Powder, Methylchloroisothiazolinone, Methylisothiazolinone, Benzyl Alcohol, Citric Acid, Sodium Chloride, Hydroxypropyltrimonium Hyaluronate, Parfum (Fragrance).

Moisturizing components in the product help to maintain the moisture balance in the hair shaft, eliminate electrification, restore the vitality of curls, make them shiny and silky. The Resist Hyal complex fills the hair shaft with the necessary nutrition to restore strength and shine. INGREDIENTS: Aqua, Cetrimonium Chloride, Glycerin, Amodimethicone, PEG-40 Hydrogenated Castor Oil, Sodium Hyaluronate, Glycerin, Trehalose, Urea, Serine, Pentylene Glycol, Glyceryl Polyacrylate, Algin, Caprylyl Glycol, Pullulan, Disodium Phosphate, Potassium Phosphate, Polyquaternium-10, Parfum, Sorbitan Caprylate, 1. 3-Propanediol, Benzoic Acid, Disodium EDTA, Tilia Cordata Flower Extract, Panthenol, Amaranthus Caudatus Seed Extract, Rosa Canina Fruit Extract, Citric Acid.

It gives volume and light hold to thin hair, provides shine and radiance. Facilitates combing, has an antistatic effect. Hyaluronic acid moisturizes the hair along the entire length, gives it a natural shine. Collagen strengthens and makes hair thicker. Keratin restores hair structure and gives elasticity. Fucus and kelp saturate the hair and scalp with vitamins and minerals. The spray provides hair protection along the entire length. HOW TO USE: Spray on damp hair before blow-drying or on dry hair before using a hair iron. Do not rinse.INGREDIENTS: Aqua, Amodimethicone, Cetrimonium Chloride, Hydrolyzed Keratin, Laminaria Digitata Extract, Fucus Vesiculosus Extract, Polyquaternium-10, Sorbitan Caprylate, Propanediol, Collagen, Hyaluronic Acid, Parfum.

Applications Ideal for both commercial and domestic use: kitchens, bathrooms, shops, receptions of companies, offices, laboratories. LED downlights are ideal for spaces that demand high performance and long periods of continuous ignition.

The SMS thin film evaporator type HYVAP serves the increasing demand of the pharmaceutical industry for continuous concentration of heat sensitive, viscous and fouling products. Hygienic design for the pharmaceutical industry The HYVAP is a horizontal thin film evaporator that allows easy access and inspection of the interior and controlled and reliable CIP cleaning. The technology of the HYVAP combines the proven advantages of our conventional horizontal thin film evaporators DKH with the following new features: • Cantilever rotor design • Comfortable rotor extraction • No bearing in product space • Mechanical seal in hygienic design • Electro-polished surfaces • Sight glasses for inspection during operation The new HYVAP DZH offers the hygienic design that meets current GMP requirements. The evaporator sizes range from 0.1 m2 for laboratory to 2.0 m2 for industrial applications. LP steam as well as hot water can be applied as heating media.

The vertical thin film dryer consists of a cylindrical, vertically arranged body with heating jacket and a rotor inside. The rotor is equipped with rows of pendulum blades all over the length of the dryer. The hinged blades spread the wet feed product in a thin product layer over the heated wall and mix the product layer material intensively. Therefore the volatile components evaporate continuously from the product layer with high evaporation rates. The hinged blades are designed with a minimum gap to prevent fouling of the heating surface by product, but are never in contact with the heated wall. The product enters the dryer at its top. The evaporation starts after heating to the boiling point. In the slurry zone first solids are formed and with advancing evaporation of the volatiles and continued shearing by the hinged blades the paste breaks up to powder. The final solid product is discharged by gravity at the bottom of the dryer via a suitable air lock.

Filmtruder and Viscon processors are specialized in the concentration, purification and devolatilization of products with viscosities up to 10,000 Pa (s) and are characterized by the following properties: Agitated thin film processing Unequaled surface renewal, resulting in the lowest residual volatile content Typically no stripping agents required Large free vapour volume compared to product hold-up, allowing very high volatile removal in one stage A successful thin film processing system consists of the right processor design integrated with properly engineered subsystems. SMS can provide a complete system, including installation and start-up services, or full engineering and design documentation to allow you to add the necessary subsystems for our thin film processor.

For the thermal separation of a mixture a thin film is produced at the heated wall of a cylindrical or conical evaporator. A distribution ring on the rotor distributes the liquid evenly across the periphery. Then, the blades fitted at the rotor spread the liquid as a thin film of min. 0.5 mm over the heat transfer surface. The model concept for the flow in the thin film evaporator assumes that prior to each rotor blade a bow wave is formed. In the gap between the rotor blade and the heating surface, fluid is supplied from the bow wave of a highly turbulent area with intense heat and mass transport. This results in a good heat transfer performance even with viscous products. In addition, the formation of deposits is avoided and the intensive mixing also protects temperature-sensitive products from overheating.

Knurled Nuts Low Type (ECR Low Knurled) Stainless Steel A1 - DIN 467

Low Square Nuts (ECR Low Square) Stainless Steel A2 - DIN 562

Low Hexagonal Blind Nuts ((ECR Low Hexagonal Blind) Inox A2 - DIN 917

Low Hexagonal Nuts (ECR Hm Low H50) A4 stainless steel - DIN 439 There is a variant in A2 stainless steel

Low Hexagonal Nuts (ECR Hm Low H50) A2 stainless steel - DIN 439 There is a variant in A4 stainless steel

HEXAGONAL LOW NUTS - METRIC FINE PITCH THREAD Stainless steel A4 - DIN 439 There is a variant in Stainless steel A2

HEXAGONAL LOW NUTS - METRIC FINE PITCH THREAD A2 stainless steel - DIN 439 There is a variant in A4 stainless steel

The IST AG 300 °C Pt Temperature Sensor Series offers an excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +300 °C.​ The sensors offer a stable performance at a low price and are available with Au-coated Ni-wire which makes them ideal for soldering, brazing, crimping and laser welding. Furthermore, the 300 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. wire lengths or lead wire diameters. ​The IST AG Pt temperature sensors up to 300 °C are also available with: — Metallized backside — Inverted or perpendicularly bended wires

The IST AG 300 °C Pt Temperature Sensor Series offers an excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +300 °C.​ The sensors offer a stable performance at a low price and are available with Au-coated Ni-wire which makes them ideal for soldering, brazing, crimping and laser welding. Furthermore, the 300 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. wire lengths or lead wire diameters. ​The IST AG Pt temperature sensors up to 300 °C are also available with: — Metallized backside — Inverted or perpendicularly bended wires

The IST AG 300 °C Pt Temperature Sensor Series offers an excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +300 °C.​ The sensors offer a stable performance at a low price and are available with Au-coated Ni-wire which makes them ideal for soldering, brazing, crimping and laser welding. Furthermore, the 300 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. wire lengths or lead wire diameters. ​The IST AG Pt temperature sensors up to 300 °C are also available with: — Metallized backside — Inverted or perpendicularly bended wires

The IST AG 200 °C Pt Temperature Sensor Series offers an excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +200 °C.​ The sensors are offered in various standard lengths with Cu/Ag- single or stranded wire with PTFE -insulation. The directly welded wires offer an outstanding robustness and are optimal for connector assemblies or for soldering, welding and crimping. Additionally, the 200 °C Pt temperature sensors are also available with Ag-wire (Ø 0.25 mm) and metallized backside. Furthermore, the 200 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. different insulation materials or lead wire diameters. ​The IST AG Pt temperature sensors up to 200 °C are also available with: — Metallized backside — Wire lengths fitted to application-specific wire lengths — Ends stripped to optimize welding processes — 2-, 3- and 4-wire configuration

The IST AG 600 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +600 °C.​ The sensors are a standard solution for various temperature applications. The RTDs are suitable for welding, crimping and brazing. Furthermore, the 600 °C Pt Temperature Sensor Series is vibration and temperature shock resistant and can be customized to fit application-specific requirements. ​The IST AG Pt temperature sensors up to 600 °C are also available with: — Paired sensors — 1/5 IEC and 1/10 IEC accuracy — Small dimensions

RealProbeTemp Sensor Resistivity: 100 Ohm at 0 °C TCR: 3850 ppm/K Tolerance: IEC 60751 class F0.15 Temperature range: -50 °C to +200 °C Dimensions: in round stainless steel housing, Ø 6 mm x 25 mm long Wires: 4x Cu/Ag stranded wire AWG 28/7, PTFE-insulated (2x red, 2x white), 385 mm long Furthermore, the 200 °C Pt Temperature Sensor Series can be customized to fit application-specific requirements e.g. different insulation materials or lead wire diameters. ​The IST AG Pt temperature sensors up to 200 °C are also available with: — Metallized backside — Wire lengths fitted to application-specific wire lengths — Ends stripped to optimize welding processes — 2-, 3- and 4-wire configuration

The IST AG 600 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +600 °C.​ The sensors are a standard solution for various temperature applications. The RTDs are suitable for welding, crimping and brazing. Furthermore, the 600 °C Pt Temperature Sensor Series is vibration and temperature shock resistant and can be customized to fit application-specific requirements. ​The IST AG Pt temperature sensors up to 600 °C are also available with: — Paired sensors — 1/5 IEC and 1/10 IEC accuracy — Small dimensions

The IST AG 600 °C Pt Temperature Sensor Series offers excellent long-term stability and fast response time with low self-heating within a temperature range of -200 °C to +600 °C.​ The sensors are a standard solution for various temperature applications. The RTDs are suitable for welding, crimping and brazing. Furthermore, the 600 °C Pt Temperature Sensor Series is vibration and temperature shock resistant and can be customized to fit application-specific requirements. ​The IST AG Pt temperature sensors up to 600 °C are also available with: — Paired sensors — 1/5 IEC and 1/10 IEC accuracy — Small dimensions