Lubricating system - Import export

Arga Super EP 00, is a semi-fluid lithium soap automotive grease that is used in roller bearings, and sliding bearings, central lubrication systems and applications operating under high loads up to 120°C.

Dura T Series, is a high performance hydraulic system oil which is suitable to use in wide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.

4-column, servo-controlled station groups Needle bearing toggle system Cooling water flow control system Max stroke upper/lower 150 mm Lubrication system for each bearing Easy mould damping (with Locking System) Support piston upper and lower group Upper group spacing system (Positioning block parallelism) Ability to work with frame or press in upper and lower press Servo controlled seal system Compression force 70 tons

4-column, servo-controlled station groups Needle bearing toggle system Cooling water flow control system Max stroke upper/lower 150 mm Lubrication system for each bearing Easy mould damping (with Locking System) Support piston upper and lower group Upper group spacing system (Positioning block parallelism) Ability to work with frame or press in upper and lower press Servo controlled seal system Compression force 60 tons

It is a high performance automotive gear oil formulated with state-of-the-art additives far use in heavy duty manual transmissions. it was designed to provide effective protection against wear in hypoid gear differentials, axles lubrication systems and transmissions in a wide range oftemperatures and harsh operating conditions. It provides increased protection and lubrication in gear and transmissions of passenger cars and commercial vehicles requiring API GL-4.

Lithium grease is yellow colored product containing lithium soap, rust, oxidation additives and qualified mineral oils. It has general purpose application areas. It can also be used in roller and chassis lubrication processes. It is used in rollers, sliding bearings, central lubrication systems and general industrial applications. It is especially intended for roller lubrication, however, also used in chassis lubrication processes. • It reduces grease kinds and thus provides cost-savings in wide purpose applications of vehicle fleets and factories. • It provides high resistance against rusting and corrosion. • It provides operating performance between -20 °C and +130 °C. • It reduces abrasions and thus maintenance costs with the help of high amount of EP high pressure additive it contains. • It forms tampon oil film in vibrating medium, and thus extends bearing’s life.

It is special high performance oil that is formulated to be used in lubrication processes of closed gear systems such as industrial gear systems (reducers), and that provides operation easiness under excessive load and pressure.

Lityum EP grease is yellow colored grease containing lithium soap, rust, oxidation, AW and high amount of EP additives and qualified mineral oils. It is especially intended for roller lubrication, however, also used in chassis lubrication processes. It is used in rollers, sliding bearings, central lubrication systems and general industrial applications. It is especially intended for roller lubrication, however, also used in chassis lubrication processes. • It reduces grease kinds and thus provides cost-savings in wide purpose applications of vehicle fleets and factories. • It provides high resistance against rusting and corrosion. • It provides operating performance between -20 °C and +130 °C. • It reduces abrasions and thus maintenance costs with the help of high amount of EP and high pressure additive it contains. • It forms tampon oil film in vibrating medium, and thus extends bearing’s life.

It is used in rollers, sliding bearings, central lubrication systems and general industrial applications. It is especially intended for roller lubrication, however, also used in chassis lubrication processes. • It reduces grease kinds and thus provides cost-savings in wide purpose applications of vehicle fleets and factories. • It provides high resistance against rusting and corrosion. • It provides operating performance between -20 °C and +130 °C. • It reduces abrasions and thus maintenance costs with the help of high amount of EP high pressure additive it contains. • It forms tampon oil film in vibrating medium, and thus extends bearing’s life

It is special high performance oil that is formulated to be used in lubrication processes of closed gear systems such as industrial gear systems (reducers), and that provides operation easiness under excessive load and pressure. It provides effective protection in gears operating under excessive loads because of excessive pressure additive in its formula (EP). It prevents corrosion. • It minimizes friction. • It has a high resistance against rust and oxidation formations.

It is a multipurpose heavy duty gear oil that provides efficient lubrication of mechanical systems thanks to the modern technological formulation developed far high performance manual transmission and transmissions of passenger cars and commercial heavy vehicles. It is resistant to extreme pressure (EP) and it has rust, oxidation and anti-foaming proper­ ties. The API GL-5 was designed far the use of the performance level in the required spiral, taper and hypoid gear systems, in the gearboxes and differential gears ofvehicles operating in extreme conditions.

The tunnel-type hot water and multi-purpose washing, rinsing, drying and lubricating system is an effective cleaning and treatment method of ten used on a large scale in industrial production processes. This system is located inside a tunnel where materials move automatically on a convey or belt.

Rock Drill Oils are purpose-built to deliver efficient lubrication and extended trouble-free service to a wide range of air-operated equipment. These include pneumatic drills, jumbo drills, jackleg drills, jackhammers, small air tools and motors, as well as airline oilers. Formulated from oxidation-resistant paraffinic base oils, these oils incorporate established rust and oxidation inhibitors, foam inhibitors, and extreme pressure additives. The unique formulation of Rock Drill Oils strikes a crucial balance between demulsibility control and tackiness, which are essential characteristics for effective lubrication in air-operated systems. This ensures smooth, reliable, and long-lasting performance for your equipment.

Automatic Divider Machine Specifications Weight adjustment by touchscreen panel • The main body is made completely of stainless steel. • Dough counting screen • Electronic speed control unit • Dough twicing system on the conveyor band. • Drum surface chrome plated. • Piston slot is made of stainless steel. • Vacuum piston is made of anti-oxidation materia Manuel Dividing Machine Specifications Weight adjustment by hand wheel • The main body is made completely stainless steel • Drum surface chrome plated • Piston slot is made of stainless steel. • Vacuum piston is made of anti-oxidation material. • 24 V Control board • Closed circuit lubrication system. • Piston movies to discharge position automatically when the machine shut-off • 70 kg. hopper capacity • Stainless steel lids. • Belt/pulley power transmission system Option Single or double piston 50-200, 100-600 and 250-1000 gr dividing range Manual and touchscreen control panel Teflon coated hopper Big sized hopper (140 lt dough capac

PRODUCT INFORMATION Cnc controlled 4 corner pvc profile welding and cleaning line enabling movement in 2-4 axes Yılmaz makine custom profile cleaning programming Manual and automatic operating modes, Automatic profile recognition Automatic profile cleaning blade with 11 sets Separate cleaning blades for color and white profiles Profile width & height and frame wing control sensor Automatic bearing lubrication system Windows based touchscreen computer Profile program transfers via USB flash memory Remote connection and technical support capability Movable control panel, In process speed changes 220 frames/8 hours ( CNC 608)-270 frames/8 hours (CNC 608) On screen alarm and warning displays Phase control system, Low pressure control system Ability to clean all 4 corners and end-of-line transfer with automatic profile rotation robot Automatic system allowing for movement in Ø3 axis (X, Y1, Y2) Yılmaz makine custom 0,2-2 mm. welding interval automatic transfer

- This machine has 2.5 m conveyors in the right and left. - Saw with a diameter of 450 mm. diamond saw and is also a German brand Schaffer. - The saw on it is aluminum for working with both aluminum and PVC profiles. - In order for the cutting in Aluminum to be smooth and clean, and also so that the saw does not rust, there is a lubrication (cooling) system. This system is activated only for aluminum. The system is disconnected during PVC execution.

PRODUCT INFORMATION AIM 4420 is a 4-axis servo-controlled machining center that is designed to perform drilling, grooving, notching, taping, sawmilling, etc. on all kinds of aluminum & PVC profiles, light alloys in general and thin-walled steel profiles. Efficient and economic processing on the three sides of the profiles is possible with this fully automatic machining center. General Features: • It is designed to make operations on three surfaces of the profiles such as a hole, slot, corner relieve, saw cutting, tapping, flow drilling, etc. • CNC automation system providing motion control at 4-axis • Linear type of magazine unit for 11 standard tools and Ø180 mm of the saw blade • Flow drilling and tapping feature by means of encoder spindle (optional) • Automatic clamp recognition and clamp positioning are available • CNC controlled spray tool lubrication system • Pneumatically working 4 pcs of clamps for gripping the workpiece

Cnc controlled 4 corner pvc profile welding and cleaning line enabling movement in 2-4 axes Yılmaz makine custom profile cleaning programming Manual and automatic operating modes, Automatic profile recognition Automatic profile cleaning blade with 11 sets Separate cleaning blades for color and white profiles Profile width & height and frame wing control sensor Automatic bearing lubrication system Windows based touchscreen computer Profile program transfers via USB flash memory Remote connection and technical support capability Movable control panel, In process speed changes 220 frames/8 hours ( CNC 608)-270 frames/8 hours (CNC 608) On screen alarm and warning displays Phase control system, Low pressure control system Ability to clean all 4 corners and end-of-line transfer with automatic profile rotation robot Automatic system allowing for movement in Ø3 axis (X, Y1, Y2) Yılmaz makine custom 0,2-2 mm. welding interval automatic transfer Automatic operating mode

VK 420 is designed for the precise V cutting and 90° end notching operations with minimal off cut size on aluminum and PVC profiles. Machine is constructed to minimize the off cut size Hydro-pneumatic V sawing head infinitely adjustable according to the profile Manual adjustable of back fence working in T slot mechanism Double hand safety operation External adjustment of hydro-pneumatic saw blade feeding 90 degree of notching operation (optional) STANDARD ACCESSORIES • 2 x T.C.T saw blades, Ø 420 mm • 2 x Horizontal pneumatic clamps • Service spanner • Air gun • Spray saw blade lubrication system

SK 450 is designed for the strait cutting operations of the large size of profiles made of PVC and aluminum by means of Ø450 mm of saw blade at 90°. It is ideal for the serial and precise slicing operations. Suitable for high-volume slicing of aluminum profiles for window manu facturing and industrial applications High precision servo motors and inter nationally recognized components Saving of time by means of servo con trolled workpiece infeed speed and saw blade stroke Horizontal and vertical clamping of the workpiece during the sawing operation Automatic table retraction feature that moves the cut material a small amount after cutting and before the blade came back down to prevent the re-cut & scratches High cutting accuracy by means of the robust mechanical structure Programmable spray saw blade lubrication system via control panel Large memory capacity for the cutting programs The machine shut down automatically after reaching the requested quantity

PRODUCT INFORMATION It is used for the processing of slots for locks, drilling handles, hinges, espagnolette holes and opening water drain slot on PVC and aluminum profiles up to 3 mm of thickness. Opening locks, drilling handles, hinges, espagnolette holes etc. on PVC and aluminum profiles Cast aluminum structure Corrosion proof bearing shaft Robust machine stand constructed from steel sheet Electroplated copy template Two pcs of tracer pins Ø5 router bit included Clamping capacity : W max.:130, W min.:10, H max:130, H min.: 20 mm STANDARD ACCESSORIES • Ø5 mm of router bit • Air gun • 2x left and right profile stops • 2x pneumatic horizontal clamps • Spray tool lubrication system OPTIONAL ACCESSORIES • Additional router bits • Special copy templates • MA 240 centering apparatus • MKN 150 roller conveyor TECHNICAL SPECIFICATIONS 750W 400V 50~60 Hz / 550W 230V 50 Hz x:270 y:110 z:130 mm 14000 D/dak. RPM W:64 L:80 H:149 cm. 110kg. 72 kg.

PRODUCT INFORMATION It is designed to operate quickly and precisely lock’s holes on aluminum and PVC profile, without releasing the workpiece. Copy router with 1 vertical and 2 horizontal spindle motors ( 3 x 1.1 Kw 12.000RPM) Designed to perform quickly and precisely lock’s holes on 3 sides of the aluminum profile without releasing the workpiece Pneumatic 2 x horizontal and 2x vertical clamps Horizontal and vertical pneumatic tracers with 3 diameters Ø 5, Ø 8, Ø 10 mm Horizontal & vertical templates with standard figures for Aluminum and PVC profiles Smooth movement, high precision and great sensitivity provided with gas spring and ergonomic handles 1 m of roller support table at the right (with ruller) and left side Spray tool lubrication system OPTIONAL ACCESSORIES • Additional router bits with Ø5mm, Ø8mm and Ø 10mm • Additional collets with, Ø 8 and Ø10 • Special templates Videolar TECHNICAL SPECIFICATIONS 3x1.1 kw 1 P 230 V 50-60 Hz 6-8 Bar 8 lt./ min.

PRODUCT INFORMATION It is used for the processing of slots for locks, drilling handles, hinges, espagnolette holes and opening water drain slot on aluminum profiles up to 3 mm of thickness. Copy fitting operates manually and the figures on the template are machined at 1:1 ratio The aluminum profiles up to 3 mm of wall thickness can be machined with a strong spindle motor The cutting fluid controlled with a joystick is sprayed to the milling spot Slots in varied lengths and widths can be opened without using the copy milling template The length of the water drain slot is adjustable on the template Copy milling motor is directly controlled via joystick Reference stops at 2 sides of the milling machine Standard equipped with inlet-outlet conveyor Ergonomic hand control unit STANDARD ACCESSORIES • Ø 5mmx L :80mm of router bit • Air gun • 2 x profile stops both left and right • Spray tool lubrication system • 2x horizontal clamps OPTIONAL ACCESSORIES • Additional router bits

PRODUCT INFORMATION ACK 700 is designed for the strait or angular cutting operations of the large size of profiles made of aluminum materials by means of Ø 700 mm of saw blade. Two-hand run safety operation Location points at 75°,60°,45°,30°,22.5°,15°,0° both left and right Pivoting range from -75° left to +75° right infinitely adjustable Hydro-pneumatic saw feed Adjustable saw blade feeding speed Interior LED lighting Pneumatically opening safety guard Safety locking switches on top guard and front doors Double acting clamps for operator safety STANDARD ACCESSORIES • Equipped with saw blade Ø 700 mm& 4 Kw motor • Spray saw blade lubrication system • MKN 301 roller conveyor (3 m) • 2 x vertical and 2 x horizontal clamps • Air gun OPTIONAL ACCESSORIES • Additional saw blade Ø 700 mm • VCE 1570 Chip vacuum extractor • SKN 300-450-600 conveyor • DKN 302-452-602 conveyor • Laser marker set for 90 ° of cutting operation TECHNICAL SPECIFICATIONS 4kW - 3P 400 V 50~60 Hz

PRODUCT INFORMATION ACK 550 is designed for the strait or angular cutting operations of the large size of profiles made of aluminum materials by means of Ø 550 mm of saw blade. Two-hand run safety operation Location points at 75°,60°,45°,30°,22.5°,15°,0° both left and right Pivoting range from -75° left to +75° right infinitely adjustable Hydro-pneumatic saw feed Adjustable saw blade feeding speed Interior LED lighting Pneumatically opening safety guard STANDARD ACCESSORIES • Equipped with saw blade Ø 550 mm • Spray saw blade lubrication system • MKN 301 roller conveyor (3 m) • 2 x vertical and 1 x horizontal clamps • Air gun OPTIONAL ACCESSORIES • Additional saw blade Ø 550 mm • VCE 1570 Chip vacuum extractor • SKN 300-450-600 conveyor • DKN 302-452-602 conveyor • 1 x horizontal clamps • Laser marker set for 90 ° of cutting operation Videolar TECHNICAL SPECIFICATIONS 4kW - 3P 50~60 Hz 400 V 2400 D/Dak. RPM D: 550 mm d:30 mm 6~8 Bar 160 Lt/dak. 106x131x156 cm 419 kg 373 kg

PRODUCT INFORMATION ACK 420 S is designed for the strait or angular cutting operations of the large size of profiles made of aluminum and PVC materials by means of Ø 420 mm of saw blade. Two-hand run safety operation Location points at 75°,60°,45°,30°,22.5°,15°,0° both left and right Pivoting range from -75° left to +75° right infinitely adjustable Hydro-pneumatic saw feed Adjustable back fence for most effective use of the saw blade Adjustable saw blade feeding speed Manually opening safety guard Interior LED lighting STANDARD ACCESSORIES • Equipped with saw blade Ø 420 mm • MKN 301 roller conveyor (3 m) • 2 x vertical clamps • Spray saw blade lubrication system (ACK 420S) • Air gun OPTIONAL ACCESSORIES • Additional saw blade Ø 420 mm • 2x horizontal clamp • VCE 1570 Chip vacuum extractor • DKN 300-450-600 conveyor • SKN 300-450-600 conveyor • Laser marker set for 90 ° of cutting operation • Pneumatically working top guard Videolar TECHNICAL SPECIFICATIONS 2.2kW 50/60Hz

PRODUCT INFORMATION ACK 420 is designed for the strait or angular cutting operations of the large size of profiles made of PVC and aluminum materials by means of Ø 420 mm of saw blade. HDL 300 It is computerized heavy duty lenghtstop which helps to cut the profiles precisely in the required measurements. ACK 420 General Features Two-hand safety operation Location points at 75°,60°,45°,30°,22.5°,15°,0°, both left and right Pivoting range from -75° left to +75° right infinitely adjustable Hydro-pneumatic saw feed Adjustable back fence for most effective use of the saw blade Adjustable saw blade feeding speed Manually opening safety guard Interior LED lighting STANDARD ACCSSORIES Equipped with saw blade Ø 420 mm Manuel MKN 300 end-stops (3 m) 2 x vertical clamps Spray saw blade lubrication system (ACK 420S) Air gun OPTIONAL ACCESSORIES Laser marker set for 90° of cutting operation Pneumatically working top guard Additional saw blade Ø 420 mm 2x horizontal clamp

PRODUCT INFORMATION DC 421 MS is designed for the strait or angular cutting operations of large size of profiles made of aluminum and PVC materials by means of double head sawing units equipped with Ø 420 mm of saw blades. Two-hand run safety operation Manual adjustment of intermediate tilting angles from 90° to 45° inwards Hydro-pneumatic saw blade feed Cutting accuracy +/- 0.2 mm Manual positioning of cutting units Solid steel construction of the body Conveyor & 2 x pneumatic profile supports Automatically closing safety guards Horizontal pneumatic material clamps to ensure optimum material fixing STANDARD ACCESSORIES • Equiped with Ø 420 mm of saw blades • Roller conveyor & 2 x manual profile supports • 4 x horizontal clamps • Air gun • Spray saw blade lubrication system OPTIONAL ACCESSORIES • Profile Length Stop for cutting short pieces (DKN 70 with digital unit, DKN 71 with ruler) • Machine with the length of 5m and 6m • VCE 1570 Chip vacuum extractor

- Two Saws with a diameter of 500 mm. diamond saw and is also a German brand Schaffer. - It is possible to work in aluminum and PVC profiles. MOTOR SERVO - The screen we use is a Mitsubishi brand with a PLC driver - We use Schneider in electrical materials. - We use the Japanese liner Ray and the car. - You can cut any profile length with a long measurement program. Although the machine is 4 meters long, if you want to cut 6 meters, the machine adjusts it. - The machine has an automatic slicing function. - Suitable for optimization programs such as ERKO and ABT. - There are 4 options for a foreign language. - You can connect to the Internet from far away and detect an accident. There is a menu on the screen that shows where the accident is. - Has a lubrication cooling system for the aluminum profile.