Drives - Import export

WE SUPPLY A VERY WIDE RANGE OF OMRON PARTS. WE HAVE OVER 10 MILLION LINES OF COMPONENTS IN OUR SUPPLY. IF YOU HAVE ANY REQUIREMENT ON THIS PRODUCT OR SIMILAR, PLEASE CONTACT liamm@merefields.com

Wire Belt introduces our line of PEEK drive components. PEEK is an abbreviation for PolyEtherEther-Ketone, a high performance engineering thermoplastic that can operate at high temperatures and is less abrasive on your stainless steel belts than metal drive components. PEEK can be used continuously to 240°C and in hot water or steam without permanent loss in physical properties. Our PEEK line is available for all Flat-Flex®, Versa-Link™, and Compact-Grid™ drive components including: sprockets, blanks and end rollers.

When looking for the best conveyor belt drive components for your machine, look no further than Wire Belt’s customised sprockets and blanks. We can guarantee the perfect fit to keep your lines running smoothly and efficiently. Whatever drive component you may be looking for, we offer a variety of materials to meet your needs. To find out more about our solutions, contact our Technical Sales Engineers.

Wire Belt’s innovative line of Clean-Sweep™ sprockets are specifically designed to deflect the amount of product buildup accumulated on your conveyor’s drive. This means that there is less of a chance for product loss & carryout, belt skipping due to product buildup, and belt breakage due to incorrect contact with the sprocket teeth. Clean-Sweep™ sprocket’s tooth chamfer is machined to reduce drive friction and can lengthen belt life.

> Click on the "WEBSITE" link for more > Once our Transport Consulting Team have completed the preliminary planning for your heavy transport project, a test drive of the proposed abnormal load route can be undertaken. Used for wind turbine components and abnormal loads, these heavy transport test drives provide a detailed route analysis to show areas where route modifications are required to enable the passage of the proposed vehicle and load. The loaded vehicles simulate the correct dimensions of the abnormal loads, as would be required for the actual movement and any projections either in length, width or height are assembled to the trailer. All projections are designed to allow for easy modifications and reduction in size if required whilst on the public roads, this allows for quicker and smoother manoeuvrability reducing the impact on other road users.

> Click on the "WEBSITE" link for more > At Training4Transport we provide JAUPT Approved CPC Periodic Training for professional drivers in the transport & logistics industries. The Driver Certificate of Professional Competence (Driver CPC) transport qualifications for professional bus, coach and lorry drivers introduced across Europe aim to improve road safety and help to maintain high standards of driving. Our Driver CPC approved courses will each give you 7 hours towards your required 35 hours of periodical training. - Safe Urban Driving - Module 1 - Safer Loading, Loading Safely - Abnormal Loads and STGO Awareness - Lo CITY Driving NEW TO 2019: Possible 35 Hour 5 day programme over 7 days to suit customer requirements.

> Click on the "WEBSITE" link for more > Our general transport operations training provides individuals with the necessary experience to undertake Banksman and yard shunter responsibilities on your premises. Added to these two modules, the newly introduced van smart training designed to reduce work related road risks and improve safety standards. Manoeuvring and reversing vehicles on site is a major cause of workplace accidents and can lead to serious and sometimes fatal injuries. Training4Transport offers the opportunity to ensure that Yard Shunter Drivers are trained in safe working practices to minimise the risk of potentially costly accidents. Another part of our Transport Operations Training is Banksman courses, these are ideal for anyone who is involved in the control of commercial vehicle movements on the highway, in factory yards, warehouses. loading bays and storage depots.

Our Pedestrian Sliding Door Drive has been designed for use in Prisons and other custodial locations. The drive is fully compliant with UK Home Office specifications and is compatible with SMS and locking control systems. The drive is intended as a ’safer’ alternative to traditional hydraulic powered doors for new and existing installations. The MK II drive incorporates our latest Intelligent Test Box, providing fault diagnoses LEDs and offering an interface for local control using our optional Portable Engineer’s Sliding Door Terminal. The MK II drive is completely compatible with Folknoll locking control systems and other Folknoll custodial products.

Product Features: • The MDF3 three phase drive filters are suitable for inverter / servo drives and high noise environments. • The MDF3 range of three phase high performance industrial filters are available in 8 current ratings, from 8 Amps to 150 Amps at three phase 440V, and have stud termination. • Primarily designed for use with motor drive inverters they are suitable for all applications without a neutral conductor where leakage current is not a limiting factor i.e. permanently wired-in equipment (3 wire systems). • All products are RoHS compliant and approvals held include UL and cUL.

LS Industrial Systems low voltage inverter drives compliant with international European Machinery standards. LS Industrial System IC5 Inverter Drive LS Industrial Systems iS7 Inverter Drive LS Industrial Systems S100 Inverter Drive LS Industrial Systems H100 Inverter Drive

Requiring no lubrication and virtually no maintenance, the Gast complete range of Regenerative Blowers for high volume vacuum or compressed air applications are available in both motor-mounted and separate drive models. Boasting a rugged construction that’s designed to suit the most demanding applications, the Blowers offer oil-less operation ensuring that the discharge air remains free of contamination. In addition, these units have very few moving parts and no wearing components, which help to lessen operating noise levels and keep downtime to a minimum.

We offer complete drive units as well as the motor control unit on its own. The FRIWO motor control unit is installed directly onto the motor. They work together to form one perfectly aligned system.

Davall Gears manufacture all forms of gearing, both metric and imperial [inch], and are a specialist for spiroid [Spiradrive] face worm and wheel drives.

Davall supply all forms of timing [synchronous] belts

Davall DSG supply all forms of timing [synchronous] pulley systems

Whether your project requires a simple technician workshop or a fully-integrated FPSO VSD Module, our design engineers work from a thorough understanding of our customers’ operational requirements. All OEG cabins are designed to optimise work-space efficiency, meet environmental and acoustic requirements, and house our customers’ personnel or specialist equipment in complete safety. We manufacture all our cabins to the highest industry standards (EN12079, DNV 2.7-1, DNV 2.7-2, DNV 2.7-3, BS EN 60079 and ATEX), including compliance with SOLAS/IMO regulatory requirements for A60 fire protection as standard. State-of-the-art safety monitoring systems are incorporated, including an integrated fire and gas, pressurisation and emergency shutdown system suitable for Zone 1 applications. Our experienced discipline technicians can integrate data communication networks, fire suppression, air conditioning and other systems to ensure rapid mobilisation and easy hook-up.

The VCSP Electromagnetic Drive delivers optimal performance and efficiency to vibratory conveyors. With precision control, superior efficiency, and reliable durability, it enhances material handling operations using vibratory conveyors. Key Features: Precision Control: Customizable speed and amplitude adjustments ensure smooth and efficient movement of materials. Superior Efficiency: Advanced electromagnetic technology minimizes power consumption for cost savings and environmental benefits. Reliable and Durable: Built with high-quality materials, it guarantees exceptional reliability and longevity. Easy Integration: Seamless installation and user-friendly interface for effortless control and operation. Customizable Solutions: Tailored electromagnetic drives to meet unique material handling requirements. Experience the cutting-edge VCSP Electromagnetic Drive to enhance vibratory conveyors. Contact us for efficient, reliable, and cost-effective vibratory conveyors

Part of our core business at Firow Propshafts is the manufacture, repair and distribution of truck, HGV and Bus Propshafts. Since 1981, we have delivered a range of truck, HGV and bus propshafts for all makes and applications. Our service is built on the understanding that a truck not operating is a truck not earning money. That’s why we offer a 24-hour turnaround on new propshafts with shorter lead times available within our local area for repairs. Next time a broken truck, HGV or bus propshafts gives you a VOR headache, give us a call. As well as our rapid turnaround VOR service, we can also provide small-medium batch work. So, whether you’re a stockist, fleet operator or repair facility, we can offer a saving based on batch quantity purchases. All of our new truck, HGV and bus propshafts are built by our in-house experts using high quality components. All we need is your registration, VIN, OEM part number or a pattern unit.

Imagine your standard promotional USB drive with a keypad encryption that will ensure the no one will be able to access your marketing branded memory sticks. With so many other security functions, this is one promtional product you can give recipients that mean a lot to your business.