Safety equipment- work - Import export

A leader in performance eyewear, we have a full portfolio of frames with protection that is second to none, incorporating traditional shapes and reinvented them with a modern edge. Our offer of distinctly contemporary, yet robust prescription and non-prescription eyewear from Riley and Alpha Solway is structured to withstand the harshest of industrial environments. Click the Link for the Full Range:

H6902 printed ESD (electrostatic discharge) floor marking material using the qualities of PermaRoute to make a high definition, industry-specific, printed floor marking material. Utilising the construction of PermaRoute means this material will hold fast, whilst displaying an important message for the area it is intended for.

Printed Anti Slip Warning Tape is something that we receive many requests for. Many customers commonly want to make a hazardous area not only safe for foot traffic but also prominently highlighted as a risk area; most customers prefer to do this by warning text. As a bespoke print onto safety-grip requires certain minimum order quantities, we decided that the best way to stop disappointing clients would be to create a standard print that would cover most of the requests which we receive; we now have two standard prints on rolls and two on cut pieces.

Durbar plate, chequer plate, diamond tread are all commonly used, you can see them almost everywhere for fire exits, walkways, access platforms etc. It is a common misconception that the pattern provides a safe surface to walk on, unfortunately, this is not correct. Durbar plate is an extremely slippy surface, metal does not easily provide a non-slip floor (its hard surface does not attract grip) and the pattern often creates more problems than it solves (the rises result in less surface area for footwear). Many government safety websites warn of the risk of using durbar type plate in critical areas. Conformable Safety-Grip tape is the answer to the problems that irregular metal plates create. Durbar plate was previously impossible to coat with a non slip surface, a conventional non slip tape would rise up when stretched into the valleys.

H3409 bolt down, anti-slip plates are an ideal solution for application in areas where Safety-Grip tape is not suitable i.e constantly wet, loose or uneven surfaces, such as external wooden surfaces like decking. Bolt down anti-slip plates are manufactured specifically for these purposes, with countersunk eyelets for easy application, and can be fitted using screws, nails or clips.

Heskins anti-slip fire exit markers have been developed and produced to offer a faster, more efficient way of creating a clear zone and prominent signage for your fire exits. Compared to stencilling, masking and painting, with waits in between for drying times, Heskins alter¬native, fire exit floor markings,¬ is a one-piece, adhesive appli¬cation, that takes literally minutes to apply, and can be used immediately, complete with an industry-standard anti-slip surface.

Commonly found chemicals such as water, soap solutions or many others do not pose any harm, even occasional exposure to certain petrochemicals or harsher cleaning does not affect the material. In certain, and very rare, situations the anti-slip tape could be completely submerged under a liquid that is extremely aggressive. Some of our customers use problematic solutions; these could include high concentration MEK, toluene, acids, alkalis etc. For almost all applications our conventional Safety-Grip range performs brilliantly. In a small number of applications one of two situations can cause problems; 1. Chemical retention In this situation mild chemicals such as basic cleaning agents mixed with water and are trapped on the surface on the anti-slip tape with no way of escaping, the fluids form a reservoir and with no form of dissipation, over time, they can damage the resins that hold the minerals onto the plastic film.

Mild abrasive Safety-Grip tape features the mildest anti-slip coating we have ever manufactured. While still having 100% coverage, the granules applied to the surface are far smaller than others in our range. This results in low peak to valley measurement, which is beneficial and more desirable in some applications.

Our current crop of anti-slip materials are strong enough to withstand industrial use and more, but for a long time, we have had various customers asking us to produce very thick anti-slip materials for their application requirements, but achieving this has always created many production obstacles. In early 2015, we made the decision to produce very thick anti-slip tape measuring 2mm in depth! This has involved us modifying the necessary production machinery to be able to handle the additional thickness this material has, investing in a new range of crush cut blade holders to ensure we can create our thick Safety-Grip products to the same level of consistent quality as with our current range of anti-slip tapes.

H3460 marine anti slip tape is one of Heskins first marine specific products, tailor-made to be used on the open seas, on anything from pleasure crafts, to competitive boats and commercial vessels. Marine anti slip tape is the first product to be 100% guaranteed salt resistant. We felt it necessary to have this feature due to the long amounts of time this will be applied on a vessel out in the open sea, as while we and others have previously used Safety-Grip™ and our non-abrasives, with the exception of our chemical resistant Safety-Grip™, we could not guarantee full salt resistance. With a salt-resistant marine anti slip tape, we can safely guarantee that, subject to correct application on to a clean, dry surface, the service life will be exceptional. For additional guarantees, our ancillaries will only help prolong the life span of the material.

Adding a thicker backing liner to our anti-slip tape reduces the chance of creases and air pockets during large sheet application, resulting in a more hassle-free application and a better finish.

H3402NUC X-Coarse uses a rare and very big type of aluminium oxide granule. The grit is so heavy that it requires a special plastic film to be able to carry it without splitting. The plastic film is coated with a high tack adhesive (HG), the adhesive is designed to adhere to often difficult substrates such as low energy powder coat that are notoriously problematic for normal adhesives.

The grit is still the same substance, aluminium oxide; but the difference is the grit granules are larger with deeper valleys and higher peaks. A deep anti-slip coating helps to prevent clogging with dirt, dust, ice etc. A deeper grit provides great durability.

H3401 standard anti slip tape is made from a fine grade aluminium oxide, which makes it suitable for use in a wide range of appli­cations. The grit is a medium anti-slip abrasive coating.­ Our standard Safety-Grip is great for general anti-slip requirements possessing excellent levels of grip (measured as Coefficient of Friction). Safety-Grip is water resistant (if applied onto a non-porous surface, we do also offer a complete range of ancillaries) and has exceptional durability in external or internal areas.

A superior rescue stretcher ideal for carrying our rescues from difficult situations. The stretcher is contained within a valise, which is easily carried on the back. Accessories are available including a four point helicopter lifting sling.

Supply and install. Cabloc Vertical Cable Fall Arrest System. Where required, we include a top extension post with integrated anchor for easy and safe transition onto a higher platform.

Our free-standing guard rail is very effective at protecting against falls from roof edges. Entirely non-penetrating and quick to install.

This safety line system provides a means of continuous attachment for persons accessing a roof.

Good to go Safety pallet truck inspection checklists is ideal for ensuring pallet trucks are maintained in a good working order Simply attach a tag to the pallet truck handle in a position for maximum visibility and then use the checklist to carry out a pre-use pallet truck inspection. Remove the top copy of the completed pallet truck checklist and place inside the tag (a duplicate NCR copy is retained in the book for management/maintenance records). The tag will clearly advise users if a fault has been found and indicate a “Do Not Use” message, or if all checks were satisfactory then users will be advised that the pallet truck is “Good to Go”. The frequency of inspection will be dependent on findings of a risk assessment with a bare minimum of an annual inspection being required. In areas of daily use, in harsh environments or high risk of collisions then the frequency may be increased to weekly or daily checks. This system is totally flexible to meet your needs.

An average of 14 fatalities and 1200 serious injuries are as a result of a fall from a ladder every year in the United Kingdom. Good to Go Safety enables a tag to be attached to a ladder and used in conjunction with a ladder inspection checklist to ensure essential pre-use ladder inspections are carried out. Helps to reduce the risk of a faulty ladder being used resulting in a fall from height. This system eradicates the assumption that the ladder is safe to use and enforces a ladder inspection checklist to be completed prior to use providing compliance with regulations and industry best practice. A quick, easy to use ladder inspections checklist system ensures that key safety checks are carried out prior to use. Once completed the ladder inspections checklist provides a clear visual indication of the ladder’s status - clearly identifying when a ladder is ‘Good to Go’ and importantly when it is not safe to use.

Each year around two thousand accidents and ten fatalities are reported due to forklift operation in the United Kingdom. That's approximately forty serious injuries caused by a forklift every single week! Carrying out daily inspections of a forklift with Good to Go Safety's inspections checklist will significantly reduce the risk of accidents and any unnecessary maintenance costs to forklifts. Good to Go Safety offers a simple solution for forklift inspections management with a flexible inspection checklist system that can be used on a pre-use ad-hoc, daily or weekly basis to suit your companies needs. Completing pre-use forklift inspections as part of your FLT (Forklift Truck) safety maintenance programme ensures both employee and visitors are aware of the forklifts trucks status at all times. Upon completion of the forklift inspection, the forklift checklist is inserted into the tag to display the inspection findings and date of completion, removing the risk of assumption.

Our RX 1 Helmet supplied with our F300T ADF & the FA100 Advanced PAPR. Please see individual product listings for product details.

The FA100 is a TH3P S L rated PAPR unit as tested according to EN:12941. Designed with welders in mind, the FA100 offers high levels of protection, a robust & strong design whilst maintaining comfort levels not usually available. Alongside the standard waist belt, the FA100 also has a unique shoulder harness option to reduce stress on the lower back. Simple and clear status display Brush-less Motor for smooth and ultra quiet running Variable Airflow Speed Control offering 175L/Min or 225L/Min Removable Li/ion Battery Run time 10hrs+ Oversized controls for use with gloves metal spark arrester Light weight @ Less than 1.1kg

Super Tough Lightweight Nylon Shell. Range of ADF's available, each offering an optical class of 1/1/1/2 or better. Tested and CE certified to EN 175B and ANSI Z87.1 Offers extended coverage of the ears & neck. Contoured flares to help channel fumes away. Pro head gear with 3 positional longitudinal adjustments & 5 angular positions Suitable for use with FA100 Advanced PAPR Unit Available with a safety helmet adapter. Fully customisable graphics available on request & subject to minimum order quantities.