Modulator - Import export

ZLN miniature toothed belt axis based on the low-profile guide system drylin® N. System width 40mm, installation height 28mm. Ready-to-install system with stepper motors or BLDC/DC motors. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

drylin® SAW-1040 linear module, drylin® W aluminium profile, surface: hard-anodised, Trapezoidal lead screw TR10x2, machined lead screw end 69x15mm, guide carriage, aluminium shaft end support. Stroke length: 500mm, carriage length: 69mm, NEMA23 stepper motor with JST connector. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

drylin® SLW-1040 linear module, drylin® W aluminium profile, surface: hard-anodised, ball bearing Trapezoidal lead screw TR10x2 made of stainless steel, lead screw end machined 6h9x17mm, guide carriage in 100mm length, shaft end support made of anodised aluminium. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

SCHOCK has many years of expertise in the assembly and manufacture of complex assemblies. Our customers can therefore also purchase a finished assembly from SCHOCK instead of many individual components

The drive technology online configurator gives you the right drive technology system after you enter your requirements. You also have the option of requesting or ordering motors and other accessories, such as the motor control system. - Fast and easy configuration - Optional accessories - Detailed parts list - Fast delivery

drylin® ZLW-0630 basic toothed belt axis, basic version, feed rate 54mm/rev, aluminium profile, surface: hard-anodised, neoprene toothed belt in black, guide carriage length 60mm, shaft end support made of aluminium, alignment of drive pin on the right, stepper motor with stranded wire. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

Consists of step motor, planetary gears and tensionable drive wheel, fully assembled.

Cisco Network Components GLC-TE= GLC-TE original & new

Disposable wooden pallets in Euro module size for single use as load carriers.

Features: — Moving magnets. — Fixed cable. — Short stroke & high duty cycle. — Angled or straight connector.

Features: — Exceptional dustproof design: CLMS has special structural design to make the whole module dustproof. In adverse working environments, the module will perform well while there will not be any structural issue caused by bellows. — Exceptional compact design: CLMS has optimized the allocated space for linear motor, linear guide, and optical (magnetic) encoder to minimize the size under thrust. — High reliability: CLMS’s encoder is installed horizontally, thus prevents its position to be affected by external impact and retains system precision. — Customization: Standard CLMS comes with magnetic encoder for position feedback. We can also install optical encoder based on customer’s need for precision while retaining the same dimensions. Other customized designs such as multi-slider, X-Y and gantry systems are available as well.

Features: — High rigidity and compactness: With excellent rigidity and compactness, this module offers possibility for size optimization at given thrust requirements. — Lightweight, high velocity and high acceleration: The ironless linear motor combined with an aluminum slider gives low self load, which is ideal for high acceleration and high velocity applications. — Smooth motion: Using ironless linear motor as the actuator, CLS run smoothly even at low speeds without cogging force. — High precision: High-precision positioning is achieved using closed-loop control with optical encoder based feedback. Available precision grades include Normal (N), High (H), and customized Precision (P) for even more demanding applications. — Multiple sliders: CLS can accommodate multiple sliders on the same axis, each controlled separately.

An easy way to automate a variety of processes such as medical masks stock control. It will allow you to use all the benefits of video analytics without using the Internet, high-power servers and other additional equipment. Advantages: Can work without internet connection USB and IP cameras can be connected Voice announcement Detection of incorrectly worn masks Integration with various access control systems, turnstiles, etc. Integration with CCTV systems An IP camera is a digital video camera, with a feature of the transmission of a video stream in digital format using the IP protocol. USB camera - a digital video camera capable of capturing images in real time for further transmission via the Internet, connected to a personal computer via a USB port. The module is able to recognize: Medical masks Worker helmets Can learn to recognize many more Recognition probability up to 99% Up to 5 people in the frame at the same time Recognition at a distance of 0.3 to 1.

Designed with CYW88335 / CYW89335 chip and conforms to IEEE 802.11ac and BT4.1 standard, it is a single channel dual-frequency WiFi combo solution.

Designed with TI WL1837Q chip, which supports 2×2 MIMO WiFi, Bluetooth and BLE. It provides high data throughput and extended coverage.

WF-M37I-FY2 module is designed with TI WL1837 chip, which supports 2×2 MIMO WiFi, Bluetooth and BLE. It provides high data throughput and extended coverage.

WF-MR89-1 module is designed with RTL8189 chip, which supports SDIO communication interface and meets the IEEE802.11n and IEEE802.11b/g standards. The wireless transmission rate can reach 150Mbps and support WFA, WPA/WPA2, WPS2.0 and WAPI. Its excellent performance with low power consumption can adapt to different working conditions.

WF-M07I-1 module is designed with TI WL1807I chip, which supports 2×2 MIMO WiFi, Bluetooth and BLE. It provides high data throughput and extended coverage.

The BT-MQ37-1 module is designed with Qualcomm QCC300x chip, a stereo flash memory programmable solution which is fully certified by Bluetooth 5.0 certification and having a high cost performance. It supports single MIC cVc echo cancellation and hands-free noise reduction technology. With the use of the AT commands to control the module through the serial port, customers can develop the Bluetooth functions and applications effectively.

BT-MC56 / BT-MC55 series are designed with Qualcomm CSR classic BC05MM+ external flash solution and built-in with Bluetooth protocol stack, which are compatible with Bluetooth 3.0, and supports various protocols such as HFP, HSP, A2DP, AVRCP, SPP and PBAP. With the use of the AT commands to control the modules through the serial port, customers can develop the Bluetooth functions and applications effectively. ID3 information display

BT-MC88-3X is a HCI communication Bluetooth module with APT-X function based on CSR8350 chip, which can support EDR to 3Mbits/s and BLE, and also compatible with Bluetooth 4.1. It provides a high-speed serial communication interface, digital audio interface and supports various protocols such as HFP, A2DP and AVRCP. It comes with a serpentine PCB antenna, which has passed the BQB certification of SIG and the EMC tests such as FCC, CE, IC and MIC to enhance your secondary developments and applications.

BT-MC88-12 is a low-cost HCI communication Bluetooth module based on CSR8811 chip, which can support EDR to 3Mbits/s and BLE, and also compatible with Bluetooth 4.2. It provides a high-speed serial communication interface, digital audio interface and supports various protocols such as HFP, A2DP and AVRCP. It comes with a serpentine PCB antenna, which has passed the BQB certification of SIG and the EMC tests such as FCC, CE, IC and MIC to enhance your secondary developments and applications.

BT-MC88-1X is a low-cost HCI communication Bluetooth module based on CSR8811 chip, which support EDR to 3Mbits/s and BLE, and also compatible with Bluetooth 4.0. It provides a high-speed serial communication interface, digital audio interface and supports various protocols such as HFP, A2DP and AVRCP. It comes with a serpentine PCB antenna, which has passed the BQB certification of SIG and the EMC tests such as FCC, CE, IC and MIC to enhance your secondary developments and applications.

The BT-MC57 series is designed with a high-end dual-mode single chip and built-in Bluetooth protocol stack, which supports Bluetooth 3.0 EDR and 4.0 BLE specifications, and also various protocols such as HFP, HSP, A2DP, AVRCP, SPP. It comes with CSR’s latest CVC auto-enhanced speech echo cancellation and noise reduction technology for HD hands-free calling and support Apt-x. With the use of the AT commands to control the module through the serial port, customers can develop the Bluetooth functions and applications effectively.

The BT-MQ33-1 module is designed with Qualcomm QCC300x chip, a stereo flash memory programmable solution which is fully certified by Bluetooth 5.0 certification and contains high cost performance. It supports single MIC cVc echo cancellation and hands-free noise reduction technology. With the use of the AT commands to control the module through the serial port, customers can develop the Bluetooth functions and applications effectively.

The BT-MQ38-1 module is designed with Qualcomm QCC300x chip, a stereo flash memory programmable solution which is fully certified by Bluetooth 5.0 certification and contains high cost performance. It supports single MIC cVc echo cancellation, hands-free noise reduction and Apt-x low-latency audio transmission technology. With the use of the AT commands to control the module through the serial port, customers can develop the Bluetooth functions and applications effectively.

BT-MC83-FY2 is a HCI module which is designed with a Cypress chip and meets the requirement of AEC-Q100. It supports EDR to 3Mbits/s and BLE, and also compatible with Bluetooth 4.0. It contains high-speed serial communication interface, digital audio interface and supports various protocols such as HFP, A2DP and AVRCP. With the use of the AT commands to control the module through the serial port, customers can develop the Bluetooth functions and applications effectively.