Electric actuators - Import export

High resolution (dead band ± 0.6%) • Robust aluminium housing • Multiple options for adjustment and diagnostics • Metall valve coupling • Manual override • Fail safe feature available

A motor actuator with the performance of a pneumatic actuator • Very high resolution (dead band ± 0.2%) • High positioning speed (up to 0.75 s / mm) • Actuating forces up to 5 kN and stroke dependent limit switches • Smooth start and slow down • Robust aluminum housing and metal gears • Separate terminal and easy adaptation • Multiple options for adjustment and diagnostics • Fail safe feature available • Ingress protection IP67

Linear actuator with dc brush motor. The magnet is set inside. Magnetic linear actuator is for furniture motorized application

Details Data: Motor Voltage: 24V DC (stepper motor) Max Load: 5500 N Max Static Load: 10000N Max Overturning Moment: TK more than 5N.M Axial Rigidity: 2000N Standard Stroke: From 100mm to 1000mm Speed Range: 1.2mm/s Transmission Precision: less than 0.35mm Reset Precision: less than 0.2mm Transmission Efficiency: More than 60% (ball screw type) Corrosion Protection: Salt spray test more than 480 hours Protection Class: IP65 Mechanical Life: More than 20 years Sensor Type: Hall Sensor

This is 400mm stroke electric actuator with Pot sensor feedback. The load capacity is 200N No load speed is 38mm/s. Load speed is 30mm/s. 12v or 24v voltage is OK

12V light electric linear actuators were designed for applications where space is limited and lighter loads are used. The 12V power is often derived from a battery. So 12 volt linear actuators are more easy to use on automobile machines and off-highway vehicles automation. With extensive experience in several engineering projects towards actuator miniaturization, we can easily design the small linear actuator type. At the same time, we can also focus on providing general improvements on mechanical efficiency, speed, or load capacity.

EleCylinder are electric cylinders with motor, encoder and integrated controller. These energy-saving actuators are extremely easy to use and operation via data input requires no complicated programming. Start and end points can be set to any position. Due to the high-speed movements, EleCylinders are ideally suited for short cycle times. Unlike pneumatic cylinders, they can also perform slow uniform speeds over the entire stroke. Even gentle starting or braking are no longer a problem. EleCylinder are repairable easily and have only a few maintenance parts.

The RCP6 rotary chucks consolidate motorized rotation and gripping movement in a single unit. The rotating axis can perform multipoint positioning between 0 and 360° (one rotation). The rotational speed and acceleration/deceleration can also be set to any value. The chuck module is small and lightweight, as a solenoid gripper is used. Furthermore, the battery-less absolute encoder equipped means that home return is not required.

Efficient positioning, assembly and handling of workpieces are key components in many manufacturing companies to meet growing cost pressures. Replacing pneumatic cylinders with electric linear drives can save up to 90 % of energy consumption. In addition, there are numerous advantages in motion control. IAI has the world's largest portfolio of electric actuators with 24 or 230 volt stepper or servo motors. The electric cylinders perform linear, rotary or gripping movements and are characterised by the uniquely compact design including motor and encoder as well the high quality. In addition to the standard version, electric cylinders are also available for cleanrooms and as IP-protected models for dusty or wet production environments.

RoboCylinder slide table actuators combine high load capacity with very good guiding accuracy. The compact design offers extra stability and enables use even in confined spaces. They are suitable for precise assembly applications, for positioning or for pushing movements of horizontal payloads up to 30 kg and vertical payloads up to 24 kg. The slide tables are provided with fitting holes for changing workpieces. The linear drives are available either as directly driven compact slides with motor in extension of the longitudinal axis as well as shorter versions in which motor and axis are parallel to each other.

RoboCylinder & IntelligentActuator Slider Types Slider type actuators are mainly used for transporting and positioning workpieces horizontally or vertically. To meet the requirements in terms of payload, speed, spindle pitch, precision and much more, IAI offers many choices in both the RoboCylinder and IngelligenActuator series. These include extra-wide slide axes whose base frames have increased bending strength. Many linear actuators are available in two design variants: As a directly driven slider type with motor in extension of the cylinder's longitudinal axis and as a shorter version with angled motor if the available working space is limited.

The linear rod type actuators from the RoboCylinder series are available with 24V stepper motor, 24V servo motor or 230V servo motor. They are characterized by their compact design, mechanical stability and high positioning accuracy of up to ± 5 μm. The linear actuators are available in two design variants: As a directly driven rod type with motor in extension of the cylinder longitudinal axis and as a shorter variant with deflection, in which the motor and axis are parallel to each other. Both variants are also suitable as heavy-duty electric actuators for high payloads. In addition to the standard version, many linear actuators are also available as cleanroom versions and for special environmental conditions also as dustproof, splashproof or waterproof models with IP54 to IP67 protection.

Electric linear actuators from IAI are available as rod, slider and slide table types as well as with toothed belt drive. They are equipped with a stepper motor or servo motor and often already have a battery-free absolute encoder as standard. On request, they can also be supplied without an electric drive unit. The product range of linear actuators consists of the RoboCylinder series, which are characterised by high user-friendliness, simple programming as well as compact design. Their focus is on covering common customer requirements and are therefore relatively inexpensive. Electric slider type actuators and axes with toothed belt drive from the IntelligentActuators product line complete the product portfolio. They meet higher requirements than RoboCylinders in terms of payload, speed, acceleration and precision.

KUK manufactures air coils for a wide variety of applications, e.g. RFID antennas, control coils or transponder coils. To produce self-supporting coils, self-bonding wire is also used, which is superficially bonded (glued) together during or after winding. Air coils are usually made of enamelled copper wire or high-frequency litz wire. So-called self-bonding wire is used to manufacture self-supporting air coils. It has an outer layer whose melting point is lower than the melting point of the insulation. After winding the air core coil, the turns of the coil are "baked" (glued) together by heating, usually by increased current flow. Thanks to our in-house plant engineering, we can optimally align our production lines to your needs, even for air core coils. - Ultra-fine wires starting at 0.020 mm - Single-layer flat coils in cylindrical or rectangular shape - single, bifilar or trifilar winding - Winding with HF litz wires

SLA500 is new design for solar thermal tower power station and high concentrated PV. To meet the mirror panel drive performance, such as the rigidity, position precision, the inside limit switch is develop by POWER JACK MOTION in patent. It can help customer adjust the angle following customer’s solar tracker. All metal structure design can meet the harshest environments.

This electric rotary actuator is dc motor with spur gearbox motion.. The shaft with plastic nut Limit Switch is inside

There are several popular 12V dc small electric actuators and 24V electric actuators in this product line. These include a light duty linear actuator or the DLA1 series 12V actuators. The others are heavy duty linear actuators such as the DLA2 series and DLA3 series 12V actuators. These are mini electric actuators.

12V light electric linear actuators were designed for applications where space is limited and lighter loads are used. The 12V power is often derived from a battery. So 12 volt linear actuators are more easy to use on automobile machines and off-highway vehicles automation. With extensive experience in several engineering projects towards actuator miniaturization, we can easily design the small linear actuator type. At the same time, we can also focus on providing general improvements on mechanical efficiency, speed, or load capacity.

Widest and reliable electric linear actuator source from powerjackmotion.com 12v electric actuator 24v electric actuator 120v electric actuator compact actuator design in many gear ratio selection to meet large speed range selection

12V light electric linear actuators were designed for applications where space is limited and lighter loads are used. The 12V power is often derived from a battery. So 12 volt linear actuators are more easy to use on automobile machines and off-highway vehicles automation. With extensive experience in several engineering projects towards actuator miniaturization, we can easily design the small linear actuator type. At the same time, we can also focus on providing general improvements on mechanical efficiency, speed, or load capacity.

The small electric actuator is strong powerful designed. Compact and small design but can push 2500N and 3000N weight object. It is special design for your project which has space limitation but needs powerful output.

Initiator cables, also referred to as sensor/actuator cables, connect control units and different sensors, or, in the case of reversal of the measurement principle, actuators. Frequently used abbreviations include ini or ini cable (plural: inis). Sensor or measurement transducers transform physical quantities such as rotation, speed, distance or length into analogue electric impulses. In the case of an actuator, the measured electric current (symbol: I, unit: ampere; A) or voltage (symbol: U, unit: volt; V) is transformed into temperature, pressure or torque. The connection cable consists of at least three cores with a small cross-section of between 0.14mm² and 0.34mm². In the simplest case, two cores are required for supplying the voltage, while the last core transmits an I/O signal. For sensitive applications, there are shielded versions in addition to the traditional ini cables to avoid EMC disruptions (electromagnetic compatibility).

Exhaust gas bypass systems are made as additional equipment in exhaust gas heat exchangers. 3-way flap is required for bypass systems. By-passing the gas flow makes it possible to adjust temperature inside boiler (exhaust gas heat exchanger). Before delivery, we do a thorough test drive for every single damper, using actuator and special measurement equipment, to make sure that they function as expected and are ready to serve reliably on site. Availaible in steel, stainless steel or heat resistant materials Flange type and size depending on customer needs We develop dampers in different sizes and various temperature ranges Actuator options; Pneumatic actuator, Electrical actuator

Body made of PP-GF, direct installation of the actuator without any additional adapter or screws, mechanical limit stops, manual override, position indivation, torque and force limiters, only sealing flange and disc in contact with medium, fix point mounting, 4 end switch adjustable, swing able 90° (180°), Power input up to 45W

The segment disc motor valve type 5030 with electric actuator is a perfect choice for on/off and control applications of liquids and vapors, even if they are contaminated by particles.

This high precision torque sensor is designed for both static and dynamic measurements on non-rotating applications. It is particularly suitable for torque measurements on, for instance, extremely small electrical actuating drives and micro-mechanical actuator elements, or for measuring reaction torques e.g. on micro-motors. The high accuracy of measurement also makes this sensor ideal for use as a reference in many fields of industrial manufacture as well as laboratory research and development projects. Not containing any rotating parts, it requires no maintenance if properly used. The strain-gage based sensor’s modular design allows precise configuration for the desired application. With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ±10 V that is proportional to the torque. The sensor can be configured via the micro-USB interface, providing access to, for example, a filter frequency setting, averaging, and a tare function.

Our H guides can be adapted to many electric actuators of the market (with threaded rod or tapped rod). Also available in anticorroding version (AluStainless Steel)

H guide unit for pneumatic cylinders ISO Ø12 to Ø100 Long guide on ball bushings or bronze bearings Protected by wipers seals H guide unit according ISO standard This Classic series of linear guide unit is the most common on the market. It ensure the guiding and antirotation of the payload, the floating coupling protects the rod of the cylinder from any mechanical stress. Adapted to the ISO6432 (Ø12 to 25) and ISO15552 (Ø32 to 100) cylinders, we can also adapt other types of pneumatic cylinders or electric actuators. Guide unit on plain bearing or ball bearing The plain bearings version is recommended for static radial loads, short strokes, dusty environments, it’s the more economical version. The ball bushings version is recommended for precision (no radial play), high loads at horizontal, long strokes and offcentering loads. For critical applications, we propose Strengthened and Heavy series and for simple antirotations, you can opt for Useries, Classic or Light.