Load sensors - Import export

MAGTROL offers a wide range of Load-Force-Weight Transducers with optional integrated electronics or Load Monitoring Units (LMU) with B.I.T.E. functions creating an ideal measurement system which continuously checks for overloads and short circuits. Idealy for use on Safety Applications according to ECE-R10, ISO 13849-1 : CAT4 & PLe and IEC 62061 : SIL3 (LE 6XX SERIES); ISO 13849-1 : CAT2 & PLd and IEC 62061 : SIL2 (LE 4XX SERIES) Magtrol Load Measuring Pins are used to measure load and force, and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s LE Series Load Measuring Pins are rugged with high resistance stainless steel and tight construction. Available in several standard ranges from 2.5 kN to 1 250 kN. .... more information www.magtrol.com

LB Series Load Measuring Pins can be used alone or as part of a complete measurement system. Magtrol offers a wide range of Load-Force-Weight Transducers in various executions and accuracy classes and our Load Monitoring Units (LMUs) constitute an ideal safe measurement system which continuously checks for overloads and short circuits. MAGTROL Load Measuring Pins are used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s LB 2XX Series Load Pins are rugged with high resistance stainless steel and tight construction, designed specifically for use in harsh industrial environments. Available in several standard ranges from 2.5 kN to 1250 kN, these highly ergonomic pins can be used for either new or refitted installations and are adaptable to various conditions.

Magtrol Miniature Load Measuring Pins are used to measure load and force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s MB-02 Series Miniature Load Pins are rugged with high resistance stainless steel and tight construction, designed specifically for use in harsh industrial environment.

TesT Force transducers comply with the best technologies available. They incorporate our long experience as well as our customer's preferences and requirements for precise and robust devices for various applications. TesT Force transducers are particularly characterized by precision, quality, robustness, durability and convenient handling. On demand we also provide specially-designed force transducers with other dimensions and measuring ranges. TesT delivers all electrical force and torque transducers with TEDS chips (TEDS = Transducer Electronic Data Sheet nach IEEE 1451.4). The electronic units of the model 813 and the TesTController 850-USB may recognize sensors equipped with TEDS chips, read their properties and calibration data and automatically calibrate with them. Thus, these electronic units operate with dozens of different sensors so that a complex recalibration is not required.

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls. The bearings of the rolls are ductile iron and the arms of the rolls are conical. It is produced with gear drive and belt drive. It can also be produced with an optional touch control screen. Especially thanks to the side covers that can be opened one by one based on the opening system, it provides fast and easy access and the possibility of rapid ball removal with the cover opened on the ball.

It is used for breaking and crushing wheat in flour factories. The most important machine of the flour mill, the roller mill consists of two pairs of roller balls operating in parallel. Unlike the pneumatic roller, the incoming product amount is measured with the help of a sensor or load cell. Feeding rollers change speed according to the incoming product amount and provide homogeneous flow. At the same time, the gap between the rolls is closed by pneumatic pistons and allows the product to be grinded by passing through the rolls.

LOAD CELL AND TORQUE SENSOR – X/Y/Z - Model 8565 In robotics and automation engineering, the requirements for precise, tactile handling are constantly increasing. The robust 8565 multi-axis sensor with its low crosstalk enables you to monitor and evaluate your process at any time, regardless of the sensor’s orientation. With just one sensor, you can obtain accurate three-dimensional load information. Its six independent outputs let you selectively evaluate the direction of action of the loads (axial force [Fz] / lateral forces [Fx/Fy] / torque [Mz] / bending moment [Mx/My]). Thanks to its compact design and adaptation via the standardized robot flange in accordance with DIN ISO 9049-1, the sensor can be integrated into many applications quickly and easily. When the slightest deviations are detected in your fast-moving and complex production processes, you can intervene immediately to make adjustments. This helps to prevent faulty parts and reduce manufacturing costs.

The 9206 USB sensor interface series is ideally suited to Notebook-based mobile use for high-precision, traceable calibration jobs that must be performed on-site for equipment such as presses, torque measurement facilities and pressure control systems. A factory calibration certificate or German-accredited DAkkS calibration certificate can optionally be provided for the USB interface plus relevant sensors, ensuring compliance even with the stringent traceability requirements of quality assurance standards. Specific characteristics: —Cost effective "Plug&Measure" concept —24-bit resolution —Practical and convenient DigiCal calibration and data acquisition software —Pt100 as option —Free LabView driver DLL for integrating in your own software environment —Multipurpose reference measurement chain with optional factory calibration certificate or Germanaccredited DAkkS calibration certificate —6-wire connection technology

Due to their small dimensions and sturdy construction, these miniature compression load cells made of stainless steel can be used in a wide range of industrial applications and in laboratories. This compression load cell is easy to handle and its installation is uncomplicated. Its small size makes it perfect for use in very restricted structures for both static and dynamic compression force measurements. The miniature compression load cell model 8415 is a flat cylindrical disc, the bottom of which is closed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. A strain gage full bridge is applied in the gauging member of the measuring element. This produces bridge output voltage directly proportional to the measured force. The small diameter of the sensors results in high rigidity and a short measurement range. The measuring force has to be applied centrically and free from lateral forces.

Due to their extremely compact design, these load cells can be used wherever static or dynamic load forces have to be measured in very tight spaces. Model 8416 is perfect for use in micro-technology and just as suitable for measuring tasks in the research and development sector. The ultra-miniature compression load cell model 8416 is a flat, circular disc, the bottom of which is sealed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. The sensor element inside the body carries a strain gage full bridge which outputs voltage directly proportional to the measurement variable upon application of force. The short nominal measurement distance of the ultra-miniature compression load cells due to their design provides a high degree of rigidity. If needed, the nominal characteristic value can be standardized in the sensor connection cable.

The 8524 precision tension & compression load cell is a versatile sensor for highly accurate load measurements in diverse applications. Optimum measurement quality is achieved with the load cell mounted on a flat, hard and polished contact surface. This requirement does not apply to small measurement ranges of up to 0 ... 2 kN because three knife-edge bearings ensure that the sensor is seated securely. Our brochure „Load Cells“ explains how you can design parasitic loads out of your mechanical system. Through-holes in the outer flange are used for fastening the 8524 sensor to the system structure. The load is applied via the central blind threaded hole or optionally via a load button. Alternatively, a pull plate and even rod end bearings, if desired, can be attached to the sensor for equally easy measurement of purely tensile loads, for instance in Bowden cables or chains. The 8524 sensor is designed to measure static, quasi-static and dynamic compressive and/or tensile loads.

With the Therma friction thermocouple you can determine the surface temperature of the brakes while driving. Attaching the mounting adapter puts uniform pressure on the brake disc through the spring-loaded sensor by using a bayonet cap. That perfectly compensates movements caused by centrifugal force and vibrations as well as the volume decrease caused by disc wear while ensuring a valid measurement. The brake disc friction sensor measures the surface temperature of the brake disc. It imparts important insights about the temperature development. That enables an indication about the brake line, intake and temperature radiation. A brake disc that becomes too hot during a race massively loses its effectiveness and deceleration to the accustomed and optimal degree is no longer possible. If the temperature is too high, the brake pads start gassing on top of that.

The 7270 TRANS CAL can run on standard or rechargeable batteries for portable use or from an external power supply. The handy model 7270 digital indicator supports load cells, pressure sensors and torque sensors based on strain gages. The 14 mm high display shows the current measured value. The TARE function allows any base load that may be present to be zeroed. The clear, well organized control structure enables quick and easy configuration of the TRANS CAL. The 7270 is equipped with a charge state indicator. Features: — Easy to operate - For all load cells, pressure sensors and torque sensors based on strain gages — Tare function - Excellent value for money - Built-in charge controller

AViTEQ Belt Scales are ideal for the precise dynamic weighing of raw materials in your process environment. You receive reliable results at affordable prices. Our devices can be used in applications subject to low or high loads, also in rough and difficult conditions. Depending on the application and requirements profile, Belt Scales are available with one, two, or multiple rollers. Advantages and benefits For continuous weighing of a wide range of bulk materials on belt conveyors. Flexible implementation depending on accuracy requirements and actual lay out of belt conveyor. Special solutions for legal-for-trade applications Long term repeatable accuracy due to robust construction and direct load transmission design that eliminates pivots and lever arms Easy installation and alignment with minimum modifications required to existing conveyor structure and components Application Weighbridge Speed sensor Junction box Load cell cable (depending on distance to weighing controller) Integr

1. Foam Filled Fender Foam-filled fenders are constructed with an energy-absorbing foam core and a tough outer skin of filament-reinforced polyurea elastomer. 2. Fender Skin The elastomer used in the fender skin is polyurea. The skin is reinforced by filament winding wrap in a helical and hoop direction, which is controlled by an automatic winding system with load cell sensors at each filament. Our four-axis filament winding system, also used to build spacecraft fuel tanks, takes control and positions each filament for maximum strength and even finish. The polyurea shows far superior physical properties to those of the rubber. The durable and resilient polyurea skin also offers the best resistance to salt water and ultraviolet light. 3. Various colors Standard color shall be made of Dark red, gray and black. But customers can request yellow etc.

3 Phase Input / 3 Phase Output HT-C Series UPS applies advanced technology that increases performance and reliability: two high speed DSPs with completed digital control fully ensure high quality of power supply, high input power factor and low input current distortion. With in-built transformer, the HT-C is providing more safety to critical load. HT-C incluede Multi-Protection, Over-Temprature Protection with 8 Sensors, Over-Load, Battery Under Voltage, Fan Failures, Short-Circuit capabilities. HT-C taking maximum peformance from batteries with Smart Charging Control and Auto Maintenance, Greatly Extend The Battery Life. Giving perfect control to operators with Four Circuit Breakers, Friendly Operation Interface and with multi-language High-Resolution LCD Screen.

The SM71 series force sensors were specially developed for measuring clamping forces. The short measuring path of 0.019 - 0.14 mm (depending on the measuring range) and a natural frequency in the kHz range guarantee optimal results even for highly dynamic tasks. Typical applications include the simple determination of screw preloads, where the force sensor is used as a “measuring washer”. The very good reproducibility is less than one percent of the nominal load. The sensor is available in measuring ranges from 20 up to 2000 kN. Hardened washers are already included in the scope of delivery for quick and easy installation. The extremely simple and robust design is made entirely of stainless steel (protection class IP68).

The PR 6251 fill-level sensor is specially designed for basic weighing of silos and horizontal tanks. It meets all requirements for years of trouble-free operation without adjustment. For use in EX zones 1, 2, 20, 21, 22 and DIV 1. Ultra-flat load cell for low precision tank weighing as alternative to level sensors Load cell capacity range from 500 kg to 16 t Accuracy class: L (0.5 %) Corresponding mounting kit: PR 6051

This is 400mm stroke electric actuator with Pot sensor feedback. The load capacity is 200N No load speed is 38mm/s. Load speed is 30mm/s. 12v or 24v voltage is OK

Model: SLA600(heavy duty solar tracker actuator) Motor type: DC brush motor Input: 12/24/36VDC Load Capacity: 6000N Standard Strock Length: 450mm/600mm/900mm Drive screw: ACME Full Load Speed: 2.89mm / sec Duty Cycle: 20% Temperature: -26˚C~65˚C(-15˚F~150˚F) Limit Switch: Adjustable Sensor: reed sensor/Hall sensor/Optical sensor Static Load: 15000N designed for kinds of solar power plant project,PV project,CPV project

Model: SLA600 (heavy duty solar tracker actuator) Motor: DC brush motor Input (DC): 12/ 24/ 36 V Load Capacity: 6000N Standard Stroke Length: 450 mm/ 600 mm/ 900 mm Drive Screw: ACME Speed (Full Load): 2.89 mm / sec Duty Cycle: 20% Temperature: -26˚C to 65˚C (-15˚F to 150˚F) Limit Switch: Adjustable Sensor: Reed sensor/ Hall sensor/ Optical sensor Load Current: less than 2.5 A Static Load: 15000N

Grain silo accessories have different functions and may help to improve the efficiency, safety and effectiveness of grain storage and handling operations. We offer a full line of grain silo accessories to fit your needs and increase your project profitability.The slide is an inner conduit situated on the roof and wall of the silo to make the product slide down homogeneously to prevent breakage during loading (of the silo). Level sensors We offer instruments that are able to measure the product level at fixed points or continuously. We manufacture supports for the different options as well as for a completely integrated system. Thermometry systems Silos Spain offers a grain temperature and moisture measuring, monitoring and control system for the inside of the silo.

Introducing the K3100 Electric Roll Lifting and Handling Equipment from KEDY – the ultimate solution for safe and efficient handling of rolls of material in your facility. With a maximum load capacity of 1100 kg, the K3100 is able to handle even the heaviest of rolls with ease. Its state-of-the-art clamping system, featuring jaws and arms, can easily adjust to accommodate rolls of different sizes and weights, ensuring a secure grip and safe movement every time. It also features a user-friendly control system that allows for easy operation and automation, increasing productivity and reducing the risk of operator error. Safety is of the utmost importance to KEDY, and the K3100 is no exception. It is equipped with a range of safety features including emergency stop buttons, load limiters, and sensors, ensuring the safety of the operator and those around the equipment at all times. Upgrade your material handling operations with the K3100 Electric Roll Lifting and Handling Equipment!

GNOM DP position sensor is designed for measuring axle and cargo load on vehicles with leaf spring suspension. GNOM DP integrates in a fleet monitoring system and transmits data as an analog signal. The tracking device converts this signal in load mass value according to the calibration table. Pressure sensor GNOM DDE is used to determine the axle load in vehicles equipped with air suspension in transport telematics systems. Pressure sensor measures the pressure in the vehicle pneumatic system and transmits data as an analog signal to telematics terminal.

Extremely high load sensor with good metrological properties. Range: from 500 kN up to 3 MN Force dir: Tension / Compression

Siempelkamp Bond Analyzer BLOW-SCAN is a detection systems which automatically detect blows and unbonded areas during the production of wood panels. It utilizes ultrasound and therefore is suitable for harsh production environment. Self-Calibration takes place in each panel gap. This compensates inuences raised from waste deposits and temperature variations. The models CONTI-SOUND and BLOW-SCAN are preferably installed in particleboard, MDF and OSB production lines. Changes of the panel properties are shown so the measurement can be used as an early warning System Features and Function Board thickness < 60 mm Density > 550 kg/m3 Detectable blow size > 28 mm Online calibration Automatic adjustment of sensor sensitivity Automatic recognition and compensation of dust load on sensors Automatic compensation of temperature drift Real-time data analysis Remote service

Original SWF 404854 gear motor for Hörmann SupraMatic E, SupraMatic P, SupraMatic, ProMatic, ProMaticP, EcoMatic, EcoStar and RotaMatic. Does not fit SupraMatic H ! 2 - wire (green and brown) connecting cable is added, with 3 holes tapped PN = 54 W, IN = 6,0A, 24 V DC, rpm = 65 without load 1-channel Hall sensor type: DCK31 (W277)

PC evaluation software Measurement data logging Calibration / adjustment Save and load sensor parameters