Germany
Manufacturer/ Producer
Germany
Continuous flow pretreatment plants are designed for high throughput and consist of cleaning stages (degreasing), rinsing stages and possibly layer-forming processes such as phosphatisation. Continuous flow pretreatment Continuous flow pretreatment plants are universally usable. Their high throughput performances in particular make them interesting for many applications. Spraying rings apply different media to the components as they pass through. In the successive zones, therefore, the parts can pass through a cleaning programme tailored to the particular application that guarantees optimum and constant quality. Rippert builds continuous flow plants for small sheet metal parts up to large-scale drag cleaning with a high quality of workmanship. Multi-channel pretreatment plants are also possible, as is combined pre-cleaning by means of robots.
Request for a quoteGermany
Complex cleaning equipment with a low space requirement. Chamber pretreatment Chamber pretreatment plants are the best choice whenever little space is to be taken up. In this way complex cleaning plants can be realised in a very compact installation space. In order to cover the complete outer contour of the components as far as possible, either the components or the nozzle holders oscillate during the process. A special version is the single-chamber pretreatment unit. In this case different programmes are successively executed in a single chamber, wherein the media are fed to separate tanks following each process.
Request for a quoteGermany
Manual or automatic pretreatment of different components. Cleaning booths Manual cleaning booths provide the possibility to pre-treat the most diverse components. The ergonomic design of the booth – including the appropriate ventilation and lighting – plays a considerable part here, so that the employees can achieve an outstanding and repeatable result with the least possible effort. Of course robots can also be used in cleaning booths in order to ensure economic working.
Request for a quoteGermany
Up to three processes – cleaning, painting and drying in one booth. Multi-process booth Just one booth for cleaning, painting and drying (up to three processes). Dry paint filter and wet cleaning in one booth – that is actually a contradiction in itself. Thanks to the separate air guidance, the exhaust air is fed downwards through the grating when drying and laterally through the filter boxes when painting, so that very little moisture enters the dry filter and virtually no particles get into the cleaning water. In order to prevent the ingress of particles, the gratings can additionally be covered over during painting. Any paint that does get into the cleaning water is usually already dry, so that no dilution in the classic sense takes place; instead, it behaves like small, filterable plastic balls. Advantages:
Request for a quoteGermany
Device for automatically blowing the adhering water off after passing through the pretreatment plant. The rotary blow-off zone is a device for blowing the adhesive water off workpieces that have been washed for the purposes of painting. It consists of a closed stainless steel sheet metal housing with forced ventilation and is employed immediately after the washing installation. In order to achieve more effective drying in the case of fissured surfaces, the blower nozzles are arranged on a rotary axis. The adhering water is blown off by the parts by air blown at high speed through the rotary blower nozzles. The effect of this is that no water droplets remain on the workpiece that could lead to slight marks in the paint film. Due to the varying blowing direction, the water is also blown out of problem zones and scooped parts in most cases. In order to be able to optimise the direction of the blower nozzle air jets, the nozzles have adjustable nozzle heads. The water that is blown off runs back into the pretreatment plant. The blowing air is extracted from the blowing tunnel via a return air duct with adjustable suction apertures.
Request for a quoteGermany
The majority of plastics used today are very susceptible to the formation of electrostatic charges on the surface. The result of this is that the surfaces are strongly attractive to particles floating in the surrounding air. These adhering particles must be removed before painting. Dirt is difficult to remove from three-dimensional or structured surfaces using conventional methods. Components such as goods carriers, which are used continuously in circulating operation, are usually also difficult to clean on account of their geometry. The dynamic ionisation station has been developed especially for these applications. The goods carriers with the three-dimensional workpieces usually pass through the ionisation station standing on, or suspended from conveyor systems. Ionisation electrodes installed in the inlet and outlet generate positively and negatively charged ions, which are transported by the flow of air to the plastic surfaces. The static surface charges are neutralised as a result. The rotary cleaning nozzles located in-between remove adhering particles from the surfaces of the workpieces using cleaned compressed air. Dust and material particles are blown away by a pulsating air flow from different directions due to the rotation of the nozzles. This highly effective method enables even dirt on shaped parts to be cleaned off reliably. The particles cleaned off in this station are fed to a filtered extraction device by targeted air guidance.
Request for a quoteGermany
Low investment costs combined with high flexibility. Manual powder coating booths Manual powder coating booths unite two considerable advantages: low investment costs and high flexibility. Care is taken during the design to ensure that the employees can work efficiently and ergonomically. Additional significant features are the ease of cleaning, good illumination and an optimised air budget. Rippert additionally offers the option to mount the powder coating booth on rails for long components. In this case the component does not move through the booth; instead, the booth drives along the entire length of the component together with the worker.
Request for a quoteGermany
These can optionally be equipped with lifting frames or robots. Automatic powder coating booths Automatic powder coating booths can be used for a very wide range of applications today. Depending upon the planned application, they can be equipped with lifting frames or also robots. The component geometry can be precisely determined via upstream light curtains in order to apply the powder to the desired places and to avoid excessive use of powder. Rippert is naturally also well-versed in explosion protection.
Request for a quoteGermany
Separation of paint powder from powder coating booths. Options: Rippert powder filter This type of filter is particularly suitable for the separation of paint powder from powder coating booths and is also often used together with an upstream Rippert cyclone for powder recovery. Separation chamber with dust collecting container, filter cartridges, compressed air cleaning and sound-insulated fan are housed in a compact design. The filter cartridges are arranged vertically in order to ensure optimum cleaning behaviour and energy-efficient operation. The fan, which also comes from our own production, is characterised by smooth running and high efficiency. Standard advantages:
Request for a quoteGermany
Centrifugal force separator for powder recovery. Cyclone separator A cyclone is a centrifugal force separator and essentially consists of three parts: The intake cylinder, the cone and the immersion tube. In the intake cylinder, the air/particle mixture is brought into a circular path by means of tangential injection. Due to the taper of the subsequent cone, the speed of rotation increases sharply, so that the particles are pressed by centrifugal force against the outer wall and decelerated by friction, causing them to drop out of the air current and fall down. The cleaned air leaves the cone in an upward direction via the central immersion tube.
Request for a quoteManufacturer/ Producer
Paul-Rippert-Strasse 2-8
33442 Herzebrock-clarholz - Germany
Germany
The machine structure with solid base plate is extremely compact and stable. All necessary components are integrated in the machine housing: mechanical axes, pneumatic components, control with drive electronics and mounted 12 "touch display. Depending on the desired version, the F-Décor 305 can produce surface patterns like circular grainings, côtes de Genève, engravings or decorative millings on mechanical watch parts. The machine guarantees high precision and high productivity. The F-Decor 305 is delivered ready for connection with either 1 or 2 working spindles.
Request for a quoteAustria
For machining technical ceramic componentsTYROLIT offers a comprehensive range of products for machining ceramic components. These include various application-specific bond systems with optimised performance in conjunction with new diamond qualities. Reduced wheel wear High stock removal rate Low grinding forces
Request for a quoteGermany
Use our industrial manufacturing expertise for your products too Electroplated surface finishing The maximum goods window for galvanising, chromeplating and nickelplating is L / W / D 2800x450x1000 mm. Chrome and nickel plating Galvanising (galvanising without passivation; blue galvanising with variable layer thickness and blue passivation; thicklayer passivation with nanosealing) Electrostatic powder coating Maximum load per hook 30 kg workpieces up to 60 kg Maximum workpiece size L / W / H = 3000/800 /1700 mm More information available at https//www.geck.de
Request for a quoteAustria
For CNC machines Metal and resin bond diamond tools with continuous rim for engraving crystal glass and stone materials. For the extremely challenging art of finishing elegant and aesthetic items. Processing can be required for both functional (niches for sliding glass window panes) and decorative reasons. The engravings can have a straight, wavy or aesthetic design. They are carried out using differently shaped and bonded wheels Excellent finishing Long lifetime
Request for a quoteCreate one request and get multiple quotes form verified suppliers.