SPANSET SECUTEX GMBH

In addition to loads with rightangled edges, there are also transportable goods with different geometry. These include loads with projecting spines and with sharp or jagged external contours such as gearwheels, turbine blades, etc. These edges are not addressable using normal approaches. The secuwave protective sleeve was developed for components with extremely critical edges. secuwave increases the deflection radius. The „sharp edge“ has no contact with the protective sleeve and thus cannot cut it.

The form and surface of the edge have a significant effect on the durability of the lifting accessory. Very rough surfaces, such as tsleeve of precast concrete products, can quickly damage the lifting strap or cable. If nothing moves, there can be no wear. The cutresistant secutex protective sleeve sits firmly against the edge and the textile lifting strap runs reliably through the protective sleeve.

secutex protective sleeves are vital when turning over coils. The lifting strap is attached to a crane hook and attached to the load with the secutex protective sleeve. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. This means that turning the load 90° is possible without any problem whatsoever. If the load is paced to the other side according to the same principle, it can be also be turned by 180°. The lifting strap can slide through the protective sleeve during the turning process. The protective sleeve and load, however, remain in constant contact. Our tips for safe turning – The lifting strap is exactly at „12 o‘clock“ over the centre of the coil. – Only individual, unpackaged and cleanlywrapped coils may be turned. – A nonslip surface, such as the secutex turning mat (cf.p. 102] must be used. – The coil must be prevented from rolling in or sliding perpendicularly to the lifting strap.

Lowprofile secutec coil cradle for longterm storage of coils of all sizes. The coil cradle may be loaded using coil hook/coil tongs as well as with a forklift truck.

The Coilprotect Premium is a further development to the already existing Coilprotect Semi. The second set of stake enables an even closer stake out, especially for narrow slit strips. The coil tray can be equipped with a coil hook and coil tongs. A fork lift assebly must be checked by the customer due to the greater width of the coil tray. secutex Coilprotect are coil cradles made from sturdy steel and are constructed for the longterm storage of coils. secutex Coilprotect is loaded using coil hooks, coil tongs or forklift trucks.

We recommend against turning stacked coils upright on the stack. The first choice for the raising of packages delivered in a horizontal position with split straps is therefore always a coil turning seat. However, there is not always a fixed installation for raising narrow coils. The secutex splitband turning strap has two different attachment ends. One end loop of the secutex lifting strap is flat, and can be easily threaded through the gap between the split bands. The flat end loop can then be easily hooked into the forged Cshackle. The protective sleeve is positioned against the “sharp edges“ of the coil. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. There is no movement, and therefore no wearing against the “sharp edges“. The solution An end loop of secutex lifting slings for slit strips is flat and can easily be pushed into the gap between the slit strips.

The light and mobile coil mat was designed for the storage of coils. It is convenient to use. Thus, makeshift storage can be set up rapidly and flexibly. Alternatively, existing storage can be expanded should bottlenecks arise.

The flexible coil mat with surrounding oil pan was designed for oilfree storage room floors. The coil mat and the surrounding oil pan are made from a single casting. Oil spillage and the associated slip hazard for employees is thereby prevented.

The proven secutex wire coil mat reliably prevents scratches and dents. The lightweight mat can be positioned quickly. Users especially rate the new rolloff stop. The individual wire rings hook firmly into the transverse grooves. The wire bundles no longer slip and an additional bundling is no longer necessary.

When rolling off a load over the floor, the heavy load can slip uncontrollably on the smooth warehouse floor. There is considerable risk of accidents. Expensive equipment can be damaged under their own weight and may require timeconsuming reprocessing. secutex turning mats (see figure above) are completely slipresistant. The turning manoeuvre can be performed safely and smoothly.