Germany
Manufacturer/ Producer
Germany
TYP C 055/H Universal cutter for radial components Description The Streckfuss Devices Type C 055 H is designed to cut the leads of axial or radial leaded components incl. IC's to the required length. Cover plate and cutting tip are drilled with each other, so all leads will be cutted simultaneously. The plates are made of high- quality tool steel hardened to 60 HRC and polished. Components
Request for a quoteGermany
TYP C 055/P Universal cutter for radial components Description The Streckfuss Devices Type C 055 P is designed to cut the leads of axial or radial leaded components incl. IC's to the required length. Cover plate and cutting tip are drilled with each other, so all leads will be cutted simultaneously. The plates are made of high- quality tool steel hardened to 60 HRC and polished. Components
Request for a quoteGermany
TYP C 057 Universal cutter for radial components Description The Streckfuss device Type C 057 is designed to cut the leads of axial and radial components incl. ICs to the required length. Even female connectors can be processed with this device. A diagonal arranged cutting knife is be driven over the whole working surface, so each component terminal is cutted by itself. The plates are made of high quality tooling- steel, hardened to 60 HRC and polished. Components
Request for a quoteGermany
TYP C 066/HA Cutter for radial taped components Description With the Streckfuss device Type C 066 HA, all taped radial components, which meet the IEC- specification, can be cutted to the desired length. The integrated touch- facility for components eliminates any kind of belt tolerances. Components
Request for a quoteGermany
TYP C 066/MA Cutter for radial taped components Description With the Streckfuss device Type C 066 MA, all taped radial components, which meet the IEC- specification, can be cutted to the desired length. The integrated touch- facility for components eliminates any kind of belt tolerances. Components
Request for a quoteGermany
TYP C 066/MAZ Cutter for radial taped components Description With the Streckfuss device Type C 066 MAZ, all taped radial components, which meet the IEC- specification, can be cutted to the desired length. The integrated touch- facility for components eliminates any kind of belt- tolerances. Components
Request for a quoteGermany
TYP C 034/Mil Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height. In the device can be adjusted via adjustment screws C 034/Mil both cutting length and height and the components are then processed. The setting is displayed on the relevant scale of the device. The component is manually inserted between the tools. Those are actuated by a pneumatic foot switch. The changeover for different cutting and grid dimensions happens in less than a minute. Components
Request for a quoteGermany
TYP C 034/S Cutting, stamping and bending device for axial components Description To facilitate the placement of short axial leaded components that must be cut before insertion into the circuit board to the appropriate length and bent to the required height. In the device C 034/S can be set via adjustment screws both cutting length and height and the components are then processed. The setting is displayed on the relevant scale of the device. The component is manually inserted between the tools. Those are actuated by a pneumatic foot switch. The changeover for different cutting and grid dimensions happens in less than a minute. Components
Request for a quoteGermany
TYP C 042 Cutting, stamping and bending device for axial components Description The Streckfuss Device Type C 042 is designed to cut, stamp and bend the leads of axial components. By the use of interchangeable tool sets a variety of form configurations can be achieved with this device. The change can be done easy and secured in less than two minutes. The settings will be displayed on the scale of the device. The embossing for the leads are tooling- specific. This tools are produced to meet customer requirements. The components are hand fed into the tooling. The component body has to be centered between the bending anvils. After the Foot pedal is depressed, the component leads are clamped on both sides. The leads are then cut to length and depending on the form shape the required lead features are put in the leads at this time. After that, the leads are bend to the 90° configuration. The processed component is then rejected by the front of the device. Components
Request for a quoteGermany
TYP C 042/S Cutting, stamping and bending device for axial components Description The Streckfuss Device Type C 042 is designed to cut, stamp and bend the leads of axial components. By the use of interchangeable tool sets a variety of form configurations can be achieved with this device. The change can be done easy and secured in less than two minutes. The settings will be displayed on the scale of the device. The embossing for the leads are tooling- specific. This tools are produced to meet customer requirements. The components are hand fed into the tooling. The component body has to be centered between the bending anvils. After the Foot pedal is depressed, the component leads are clamped on both sides. The leads are then cut to length and depending on the form shape the required lead features are put in the leads at this time. After that, the leads are bend to the 90° configuration. The processed component is then rejected by the front of the device. Components
Request for a quoteManufacturer/ Producer
Kruppstraße 10
76344 Eggenstein-Leopoldshafen - Germany
Germany
Numerous designs available at short notice Support-free assembly Nipple outlets (MSS SP 97) have been specially developed for support-free assembly. Nipple outlets are available with different ends. Smooth or beveled ends are used for welded connections, while the ends have an external thread for screw connections. We can deliver nipple outlets with NPT thread according to ASME B1.20.1 from our warehouse. We can deliver nipple outlets with BSP / T threads according to ISO 7-1 and BSP / P threads according to DIN ISO 228 with short delivery times. Standards and special requests We deliver nipple outlets in different wall thicknesses (STD, XS, S 160 & XXS and special wall thicknesses) as well as in all common materials. If required, we can also supply special materials. Technical specifications You can find more details, technical data and dimensions in our data sheet "Nipple outlet" in the download area.
Request for a quoteSwitzerland
The TR300 is mta’s table-top soldering robot platform. This robot is purpose-built and standardized for semi-automated applications that require point-to-point soldering. The table-top platform is a cost-effective solution to automate existing hand-soldering processes without the cost of fully-automated systems. Automating the solder process has several advantages over hand soldering. It produces highly consist joints, improved quality, higher throughput, and it requires less skill and training than hand soldering. This table-top soldering robot platform is also ideal for applications where human dexterity is required to position the parts. This is because operators can load and unload the parts in offline fixtures to minimize machine downtime. Because the TR300 is a purpose-built solution, it can support any of mta’s soldering heads without compromise. The ball-screw axis and motors provide fast repeatable motion.
Request for a quoteSwitzerland
As a complement or an alternative to wave, mini-wave and traditional selective soldering techniques, the MPS700 bottom side selective soldering machine provides maximum accessibility and meets mass production requirements of quality, reliability and cycle times. The iron head is equipped with a powerful heating element and a high precision wire feeder. The solder point positions are adjusted using a compact vision system close to the iron head. A 4-axis system guarantees quick and precise movements. The MPS700 can be equipped with mta classic soldering iron head and MSH150 soldering iron head.
Request for a quoteSwitzerland
The laser MRC500 is the larger robotic cell that supports point to point laser soldering from above. The standardized platform is based on a flexible and modular concept that can be adapted to a range of processes from fully-automated in-line to stand-alone semi-automated processes. The frame of the laser MRC500 is designed to ensure the safety of the operator during the laser soldering process. Furthermore, it also provides maximum accessibility to the working area. The laser robotic cell is only equipped with mta MLH45 laser head. The main features of our laser MRC500 include: Welded frame construction 3-axis Cartesian robot 500x500mm working area Industrial PC controller with Embedded Windows® operating system Intuitive menu-driven mta MotionEditor software
Request for a quoteCreate one request and get multiple quotes form verified suppliers.