Results for

Manufacturer Producer - Drawn steel wire

55 Companies

29 Products

HALIVES S.A. STEEL HOLLOW PRODUCTS

Greece

The company HALIVES S.A. S.A. since 1950 trades iron and metal steel products in Greece. The privately owned facilities of 8.5 acres with 2400 m² coverage since 1994 is a primary location and particularly advantageous due to the short distance of 500 meters from the National road of Thessaloniki - Athens and 1.500 km. from the port of Thessaloniki. The company employs 20 permanent staff and a has turnover of more than 6.500.000 euro. Our products include Hollow sections, Hot rolled plates, Hollow Rectangular Beams, Round hollow section pipes, Beams: UPN, IPN, IPE, HEA, HEB, Merchant Bars: Flat, Square, Round, Angle, Tee, narrow beams IPN, plates and hot rolled strips, Corrugated Sheets, Coils, Strips Sheets and plates, welded sections, welded hollow sections, black round pipes, black and decape metal sheets Sheets and strips, steel, hot rolled Bars, steel and rolled steel Sheets and strips, steel, cold rolled Iron and steel wire rod. Drawn steel wire, reinforcing steel Semi-manufactured products, aluminium and its alloys Semi-manufactured products, magnesium and its alloys Pipes, tubes, ducts and pipelines, ferrous metals Pipes and tubes, non-ferrous metals Pipes and tubes, non-ferrous metals, by use Wholesale trade
METAL-MESH DOO

Serbia

Metal-Steel Ltd. Was founded in 1998 as a company with largely foreign capital. Today we are mostly known in the market as the producer of steel bright drawn wire and products that can be made from it, but also as producer of woven farmer mesh.The quality of our products is of the most importance and the reason why clients decide to choose us in the market competition.A wide range of services is what our clients need and what they can always count on with Metal-Steel Ltd. Therefore, in our wholesale we offer, not only our products, but all the products of ferrous metallurgy available on the market. Farmer mesh from galvanized wire, is one of the most reliable and economic types of field fences. The primary characteristic is a big ability to change the size of the gaps during production so that it satisfies all demands regarding the stopping of small and big animals passing through. Its other characteristic is that it is easy to store and assemble, using wooden as well as metal poles.
NUHTEL WIRE

Turkey

NUHTEL is specialized in producing wire and wire products. Our primary products are hot dip galvanized wire, annealed wire, cold-drawn steel wire. The production consists of latest technology machinery ensuring the highest quality in order to meet the customer demands.
REMER SRL

Italy

For a century, the Remer Group has been manufacturing steel cables at its San Benedetto del Tronto workshops, which sell both in Italy and abroad. The computerised production process guarantees cable traceability, from wire to finished product. Thanks to permanent production controls, we are able to guarantee the highest quality standards - we hold ISO 9001: 2000, IT-5609 quality certification - and are able to satisfy the needs of our clients wherever in the world they are located. Client services at Remer include advice on product choice, full MADE IN ITALY manufacturing, in-house certification or with a third-party organisation, plus delivery to Italy or anywhere else. You'll find more information on our website: www.remer.it.

All the products for "drawn steel wire"

Cable grip with double eye and pulls

Cable grip with eye or thimble type long

Cable grip open ended or with connecting sleev

Cable grip with eye or thimble

Long or special double cable grip

Website See all products
STALMA S.A.

Poland

Manufacturer and distributor of bright steel bars: drawn bars; peeled bars and ground bars. We offer products with the highest quality parameters, high accuracy of the cross-section and the maximum degree of surface finish. IATF 16949: 2016 certificate. We work with leading steel producers and our products are delivered to 28 countries in Europe. Our products are widely used in the automotive industry, machine and device construction and many others.

All the products for "drawn steel wire"

DRAWN BARS

CALIBRATED BRIGHT STEEL BARS

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

DEMIRSAN SOGUK CEKME SAN VE TIC A.S

Turkey

We are Demirsan, a Turkish company offering a wide range of bright , black annealed, galvanized wires and high-carbon wires. Demirsan was established in 1987.Utilising our experience of many years in the steel and metals industry, our mission is to supply high carbon wire and low carbon steel wire need of our customers. Our products can be categorised as below: - Low-Carbon Steel Plating Quality Wire - High-Carbon Steel Plating Quality Wire - Cold Heading Wire - Annealed Wire - Phosphated Steel Wire - Electro Galvanize Coated Wire - Straight Cut Wire - CNC Bent Wire - Bespoke Wire Production We offer different types of packaging and different coils weight. We export for more than 35 country and our pride is our customer feedbacks about quality.

All the products for "drawn steel wire"

Black Annealed Steel Wire

Bright Steel Wire

Phosphated Steel Wires

Straightening Spring Wire

See all products
DURMAZ CELIK SAN.VE TIC A.S

Turkey

Durmaz Celik has a production line which is capable of producing at international standards in accordance with customer demands and equipped with the latest technology automatic control systems. Our galvanized wire production is based on the principle of plating the cold drawn wires produced in wire drawing machines by immersing them in the molten zinc pool. Commercial and heavy coated wires production can be made according to the usage areas or preferences of our customers.Corrosion resistance varies depending on where the wire is used and the amount of coating. Our company offers hot dip galvanized wires with high corrosion resistance and international standards with bright surface, controlled coating, a perfectly balanced zinc-iron alloy with our high performance production equipment and quality control center.
BOYCELIK METAL SAN. VE TIC. A.Ş.

Turkey

Boyçelik. Raw materials supplier of largest mattress and furniture manufacturers. A forerunner in manufacturing industry with quality products and on-time service. We Produce Spring unit systems for mattress and sofa industry. Wide range of pocket spring units. Mini, micro, high count, etc. Bonnel spring units, Loose bonnel. SL smart link spring system. Tubes and profiles for furniture industry. please contact to us, for further information or your requests.

All the products for "drawn steel wire"

Steel wire

pocket spring unit

See all products
ÖZCAN DEMIR TIC. VE SAN. A.Ş.

Turkey

The company ÖZCAN DEMIR TIC. VE SAN. A.Ş., is a Manufacturer/ Producer, which operates in the Nails and tacks industry. It also operates in the drawn iron and steel wires industries. It is based in Izmir, Turkey.
TURHANLAR

Turkey

The company TURHANLAR, is a Manufacturer/ Producer, which operates in the Frame and joinery industry. It also operates in the buying and selling apartments, joinery handles, armoured doors, and drawn iron and steel wires industries. It is based in Istanbul, Turkey.

SÜDDEUTSCHE DRAHTÖSENINDUSTRIE KARL HOSS GMBH

Germany

The company SÜDDEUTSCHE DRAHTÖSENINDUSTRIE KARL HOSS GMBH, is a Manufacturer/ Producer, which operates in the Wires and cables, steel industry. It also operates in the Metal screens for reinforced concrete, Wire mesh, drawn iron and steel wires, Metal screens for reinforced concrete, and Wire mesh industries. It is based in Trochtelfingen, Germany.
EMPO LTD.

Turkey

The company EMPO LTD., is a Manufacturer/ Producer, which operates in the Straightening - steels and metals industry. It also operates in the drawn iron and steel wires, and shears for iron cutting industries. It is based in Mersin, Turkey.

Product recommendations

Hard Drawn Steel Wire SH EN 10270-1 ASTM A 228

Spain

Hard Drawn Steel Wire CLASE II DIN 17223:1964-1

Spain

Hard Drawn Steel Wire SM EN 10270-1 ASTM A 227

Spain

Hard Drawn Steel Wire SL EN 10270-1 ASTM A 227

Spain

See more products

MING XIAO MANUFACTURING CO., LTD

China

Ming Xiao Manufacturing Co., Ltd. is a professional ISO9001 certificated Metal Parts & Plastic Parts manufacturer, Located in China Ningbo, Specialized in Services of Sheet Metal Fabricating, CNC Turning & Machining, Tube Bending, Cold Forging & Hot Forging, Plastic Injection Molding & Plastic Extrusion. We produce small & large turned parts and machined parts, Precision CNC Turned Parts by CNC Turning & Milling. Metal stamping Parts, Deep Drawing Parts, Metal parts welding and forming, Pipe Bending & fabricating components, Cold & Hot Forged Parts from Stainless Steels, Carbon steels, Brass & Copper, Aluminum Alloys. And produce Plastic injection molded parts, Plastic extrusion profiles and tubes. We are working metal parts & plastic parts for various industries, custom produce a wide variety of machine parts and hardware components according customer’s drawing or sample, such as metal shafts, steel rods, bushings, Sleeves, Flanges, tubes, pipe coupling, fittings of valves; Metal stamping brackets, frames, clamps, casing, housing; deep drawn components; tube bending components; cold & hot forging parts, studs, bolts, screws, nuts, pins; steel wire forms, metal springs and all kinds metal components, plastic injection molded parts, plastic extrude profiles and pipes… We provide a wide range of machining services, can satisfy the customer many types of products one-time order. If you need custom any metal parts or plastic parts, pls feel free to contact us for a quote.

All the products for "drawn steel wire"

Deep Drawn Parts

Sheet Metal Stamping

Website See all products
METALLURGICA LOCATELLI SPA

Italy

Metallurgica Locatelli Spa works in the low carbon steel wire drawing sector; in fact the company is specialised in producing bright wire, black cold drawn wire, hot dip annealed galvanized wire, redrawn galvanized wire, black-annealed wire, bright annealed wire, drawn annealed wire, twisted wire, wire cut in bars to measure, wire with loops, pickling and phosphate coating of wire rods with low, medium and high carbon content and steel fibres for concrete.

Website
PROSIDER SPA

Italy

For over 30 years Prosider has been selling steelmaking, stainless steel and aluminium products. We cut the following products to order: standard bar commercial, beam, structural tube laminates; galvanised and raw grillages; galvanised floor grilles and steps; stretched and micro-stretched sheet metal, perforated carbon steel sheets; stainless steel profiles and sheets; drawn wire, laminates; black and galvanised electro-welded mesh; aluminium sheets and profiles; iron articles for gates, staircases, doors, windows and fencing.
ELECTROVEK-STEEL

Ukraine

Electrovek-Steel is major stockist and trader of stainless steel, titanium, variety of rare-earth metals, refractory metals(W, Mo, Ta, Nb), special nickel-based alloys as well we copper and copper based alloys(brass, bronze), babbitt, thermocouple and heating elements. Standard form of (flat, long, drawn) can be offered as wells forged, machined pieces and parts produced to your specific order. The main product range of our company: Special alloy steel(inconel, incoloy, hastelloy, monel) sheet, plate, strip, wire, tube, pipe, rod, bar Rare-earth metals, hafnium, rhenium, indium etc. Refractory metals(Tungsten, Molybdenum, Tantalum, Niobium) tubes, sheets, strip, wire, bar, crucibles, boats Soft magnetic alloys, Permalloy, Invar, Kovar Zirconium tube, pipe, wire, rod, sheet, bar Nichrome Ni80Cr20 wire strip Fechral wire, strip GOST alloys XH78T, XH60BT, XH75MBTU Titanium sheets, plates, forgings Stainless steel pipes, tubes, sheets, plates, wire, rod, bar Thermocouple wires
GLOBAL METALL GMBH

Germany

Global Metall Gmbh is an internationally active dealership with more than 30 years' experience dealing in specialist steels and non-ferrous products: dealer in welding electrodes, dealer in drawn wires, dealer in bright steel, drawn precision profiles, forged parts for shipbuilding, forgings for petrochemical components, tool steel to customers' requirements, forged flat steel, steel for heat-treatable springs, forged flat steel, cold-headed wire, forgings for energy
GRAF GMBH

Germany

GRAF GmbH is a manufacturer founded in 1992 that is active in the sector of steels and metals – forming and stamping. It is also involved in the sectors of belt buckles, springs, wire springs, fasteners and buckles, small stamped parts, deep-drawn parts made from stainless steel, shoe buckles, bent wire parts and welded buckles for leather goods. Its headquarters are located in Werdohl, Germany.
PATELEC-ELPENA SP. Z O.O.

Poland

Patelec Group has been operating on the market for more than 50 years. We deal with copper manufacturing and processing, and our products are delivered to plants designing power tools, submersible pumps, medical instruments, and many more. It’s worth mentioning that all electrical cables, bare wires and strips made by us are subject to strength and ageing tests, and the copper rod processing service is performed according to EN 13602 and EN 60228. Exercising strict control of the entire production process, we also manufacture: – electrical plugs; – flat cables and split flat cables; – PVC cables; – round cables and spiral cables; – electrical wires; – wire rods. Main products in our range are low voltage cables with PVC or rubber insulation for 300/500 V– 450/750 V. We provide cables meeting such standards as SPT, SV, VCTF and SJ. We also produce cable harnesses suitable for supplying of machinery operating in wet environment or fully submerged and on the water surface. Our in-house engineering solutions include Ghelios products manufactured for operation in areas requiring low smoke emission and toxicity in the event of a fire, as well as Thorex products used in hazardous (ATEX) zones. Additionally we recommend a patented Hercules design for high load transfer applications, characterised by water and oil resistance.

All the products for "drawn steel wire"

Wire Harnesses

Cordsets

BQ Cables

Rubber Cables

PVC Cables

Website See all products
EZM EDELSTAHLZIEHEREI MARK GMBH

Germany

The EZM Edelstahlzieherei Mark manufactures drawn, sanded and polished bright steel using the cold deformation process and standard profiles and custom profiles according to customer drawings in almost all steel materials. Our high quality products usually end up being used in system and mechanical engineering, the automotive industry and in medical and energy technology. Drum dyeing machines and spring production machines from the brand Proll & Lohmann as well as heat and chemical surface treatment from the brand BAK are manufactured at EZM Edelstahlzieherei Mark's Werdohl plant. Among other things, the EZM metal working and service GmbH makes spindle bearings, straightening machines for round and profile materials with powered straightening rolls as well as custom orders. The innovative combination of heat, blasting, straightening, milling and planing processes at the EZM profile machining plant in Rohr/Thüringen represent a cost-effective alternative able to compete with traditional manufacturing technologies.

Website See all products

PRESSTECK S.P.A.

Germany

Pressteck is one of the leading manufacturers of precision deep-drawn parts on multiple die transfer presses, and currently employs more than 100 workers. We manufacture made-to-order parts and assemblies in line with customer specifications. We practise customer service throughout the entire service life of your products. At Pressteck, all processes are optimally organised and certified. From material supply and production right up to needs-based delivery, we ensure prompt provision. Single-use, reusable and special packaging. Specific specialised solutions are possible upon consultation. Pressteck primarily processes stainless steels and non-ferrous metals. The manufactured products are exported worldwide. Pressteck uses metal products that are easily recyclable. The processes follow strict specifications to protect nature and the environment. Leading manufacturers rely on Pressteck. How about you?

All the products for "drawn steel wire"

Deep-drawn stainless steel cartridge for expansion valves

Deep-drawn cylindrical battery cans

Deep-drawn stainless steel housing for quick connector

Deep-drawn protective cap a. stainless steel soldered to the

Deep drawn stainless steel sleeve with hexagonal flange

Website See all products
A. G. THORWARTH METALLWARENFABRIK GMBH

Germany

We are a highly reliable and efficient supplier of deep-drawn parts with an outstanding sense of quality. A strong track record when it comes to innovation, competitive prices, the use of modern machinery in manufacturing and motivated employees have made us a powerful A-supplier among the supplier industry in accordance with DIN EN ISO 9001: 2015. We are a medium-sized, family-run company with a 143-year-long history in the manufacturing of deep-drawn parts. We specialise in the manufacturing of rotationally symmetric formed parts from all materials that can be deep-drawn, such as Nirosta, brass, steel, copper, aluminium, etc. We predominantly produce supplier parts for the automotive, sanitation and furniture industries. Our machine pool includes 20 automatic progressive forming machines with up to 63 Mp of compressive force.

Website
FÖRSTER GMBH METALLWARENFABRIK

Germany

With decades of experience, we have professional expertise with all metals. We use conventional deep-drawing and hydromechanical forming to push deformability to its limits for you. But that's not all: In collaboration with our skilled partners, we offer you a comprehensive range of processing and finishing operations for your products. For any applications, from traditional metal forming to laser welding, contact us. Take advantage of our experience, expertise and creativity, even in the earliest stages of the development of your product. Our facilities: Die-cutter and eccentric presses: 6 to 250 t, deep drawing presses: 25 to 400 t, progressive presses: 100 t.

Website
DORSTENER DRAHTWERKE H. W. BRUNE & CO GMBH

Germany

Dorstener Drahtwerke has been manufacturing drawn wire, wire cloth and welded mesh of the highest quality since 1918. We use our knowledge and many years of experience to develop our basic products, as well as for read-made production. We produce a variety of highly specialised sifting and filtering products in the field of process technology. We produce for the chemical and graphic industries, the automotive industry, mechanical engineering, environmental and medical technology, the construction sector and many more. We have been able to consistently build our expertise thanks to impetus from very different industries and are always succeeding in improving our products for the processes of our customers. They particularly appreciate our service and consultation expertise in solving complex problems. Our production and quality assurance is equipped with the latest technology for testing and measuring material and product properties.

Website
CARL STAHL TECHNOCABLES GMBH

Germany

Technical ropes for demanding applications. Carl Stahl TECHNOCABLES' wire cables, strands and Bowden cables are designed with your customers' needs in mind: reliable, tear-resistant products with long-term stability for all industries and applications. Our company was founded in 1880 as a small rope producer for agriculture. Today we are an innovative engineering supplier offering in-depth expertise and global operations. Thanks to our rope production facility with its own R&D department in Süßen, we are able to guarantee the very highest quality. We supply customers with our products by the metre or ready-made. We also offer a wide range of wire rope holders and standardised suspension ropes. New: Rapid prototyping to support innovative product development.

Website
DRAHT-BINDER OHG

Germany

Thanks to more than 60 years of concentrated further development of our core business, our company now specialises in producing grids and meshes of all kinds for our customers. We provide products both for retail and directly for end customers. Our company was founded in 1945 as a metalworking company with subdivisions for fencing and door construction. Even in its early years, the company incorporated a small mechanical engineering department, in order to design wire processing machines for in-house use. In the 1970s, wire weaving developed into an equally important source of income for the company. In 1978, the first fully automatic production facility for corrugated grids and stamping grids was built, the company relocated to Erkrath and new markets were opened up thanks to the company concentrating on manufacturing wire meshes. In 1995, the product range was expanded to include spot-welded grids and profile edgings. Manufacturing is now carried out on four fully automated production lines.

Website
WESTFÄLISCHE DRAHTINDUSTRIE GMBH

Germany

Westfälische Drahtindustrie GmbH, based in Hamm, is the largest independent wire producer in Europe. The company has been manufacturing high-quality wire and finished products for a wide range of applications at 15 locations in Europe since 1856. Led by Managing Director Katja Pampus since 2009, Westfälische Drahtindustrie GmbH has established itself as a leading company in the wire industry. Founded in 1856 as "Hobrecker, Witte & Herbers", Westfälische Drahtindustrie GmbH has undergone impressive development and is now the largest independent wire producer in Europe. Westfälische Drahtindustrie focuses on ensuring quality and customer satisfaction. With a certified quality management system which complies with ISO 9001, the company ensures the optimum quality of its products. Our corporate philosophy is built on continuous improvement and ensuring quality targets are monitored. Our business areas Quality wire: Steel wire Machining steel wire Bright steel Cold forming wire Iron wire Aluminium wire Structural steel: Cold-formed, ribbed reinforcing steel (KR) Reinforcement mesh Welding consumables: Unalloyed and low-alloyed inert gas and submerged arc wire electrodes Overhead power lines Aluminium-steel wire ropes Aluminium wire ropes High-temperature wire ropes Steel strands for underground lines Westfälische Drahtindustrie GmbH remains a major player in various industry sectors and contributes to technological development worldwide.

All the products for "drawn steel wire"

Steel Wire For Technical Springs

Overhead Power Lines

Welding Technology 2

Bedding And Seating Wire

Reinforcing Steel In The Ring (CR)

Website See all products
AKEL NONWOVEN & ARTIFICIAL LEATHER

Turkey

AKEL NONWOVEN & ARTIFICIAL LEATHER is a Turkish company established in 2005 that specializes in the technical textile production, artificial leather production, and accommodation sectors. In a 20.000 m2 closed area we produce Spunbond(SS), Spunmelt(SMS) nonwoven fabric and Artificial Leather. Our company has 900 tons/month spunbond(SS), 750 tons/month Spunmelt(SMS) , and 800.000 mt/month Artificial Leather production capacities. We have 3 lines, 2 Italian and 1 Far East. Akel Steel Wire Mesh, a leading provider of high-quality steel mesh products and services. Our team of experts is dedicated to delivering the best solutions for your construction, infrastructure, industrial, and road projects. Our steel meshes are produced with top-grade raw materials and undergo strict quality control procedures throughout the entire production process! We deliver steel wire mesh as a garden fence in floors, curtains, retaining walls, concrete floors, concrete roads, concrete pipe manufacturing, tunnels, channels and landscaping applications. We deliver nonwoven for all sectors, especially masks and bags producers, pocket spring manufacturers, furniture raw material wholesalers, for agriculture frozen cover, quilting, lamination, etc. We deliver artificial leather for clothing brands for garment, Slipper brands, shoes, promotion, mousepads, office chair manufacturers, upholstery synthetic leather… We export our products by sea, air, and land transportation with reasonable freight charges.

All the products for "drawn steel wire"

Steel Wire Mesh

Website See all products
MAISHI WIRE MESH

China

Maishi Wire Mesh is a leading manufacturer of high-tech wire mesh products founded in 1986 and based in China. Through our dedication to customer-centric innovation and over 30 years development, MAISHI products have been exported to over 95 countries, serving more than 30 of the top 500 enterprises. MAISHI`s vision is to support every customer achieving better development. By leveraging our experience and expertise in production, MAISHI produce top quality products and creates green solutions that enable the customers to win market. Why to choose us? - Over 35 years of history - ISO9001 certification - Customized production - On-time delivery - Sufficient inventory - Third-party inspections - Video conferences - Honorary awards - Professional certificates

Website
PAF TUBE

Tunisia

PAF (Société de Transformation de Métaux), a subsidiary of POULINA Group Holding (PGH), founded in 1979, is the Tunisian leader in the manufacture of steel tubes and tubular products with over 40, 000 tons of tubes per year with various sections and materials. Our products are used in most industrial equipment and are often the basis for sophisticated products like access structures at height, car parts, furniture, machinery and agricultural greenhouses, etc. Exports represent 50% of turnover and cover several European countries, North and Sub-Saharan Africa. Our 35, 420 M² of covered stores make available to you a permanent stock of steel products, such as round, square and rectangular tube, drawn and galvanised tubes, etc. With a very wide range of dimensions, from 13 to 127 mm, and around 600 products.

All the products for "drawn steel wire"

Drawn Tube

Website See all products