Results for

Copper coating - China

29 Companies

136 Products

Product recommendations

India

India

China

See more products

FERROTEC CHINA

China

Direct bonded copper (DBC) substrates consist of a ceramic isolator, Al2O3 (aluminium oxide) or AlN (aluminium nitride), to which pure copper is applied in a high temperature melting and diffusion process. The result is a non-detachable connection of copper and ceramics. Due to the high heat conductivity of Al2O3 (24 W/mK) and AlN (130 to 180 W/mK) and the excellent heat capacity of the thick copper coating (200 - 600 μm) DBC substrates are ideally suited for high power electronics. The temperature coefficient of expansion (TCE) of Al2O3 and AlN closely matches that of silicon. This minimizes the mechanical stress in the bare silicon die which is attached to the substrate since the TCE of DBC Al2O3 and AlN are much closer to that of silicon than other materials.
ZHEJIANG YONGXIANG CABLE GROUP CO., LTD.

China

Zhejiang Yong Xiang Cable Group Co., Ltd. enjoys favorable geographical location and convenient transportation as we are located in the south of the international tourism city - Hangzhou, zhejiang province. Founded in September, 1995 and specialized in production of telecom optical fiber cable, cable and metalwork, possessing the total assets of 450 million Yuan. We have over 300 employees and a plant of 200, 000 square meters. We introduced domestic advanced wire rod finish equipment, straight line wiring drawing machines, multiple copper-coated wire and high speed wire winders in 2008, developing and producing Yongxiang brand gas shield and submerged arc welding rods of various models and specifications with the annual yield capability of up to 30, 000 tons. Based on the ideal of "high-quality products and wholehearted services", we sincerely welcome foreign customers to come to our company for guidance and business cooperation to create a prosperous future with joint hands.
SINOYIN SOLARES CO.,LTD

China

we are manufactory in suzhou city about 30mins by train from shanghai , which specializing in flat plate solar collector . we mainly produce blue tec and tinox coating absorber collector with whole board laser welding . we had approved SRCC, Solar Keymark certificates , nowdays in order to expand our market we innovated the new type black chrome coating collector meet different requirement . for more information please visit our web: www.sinoyin.com The basic technical data as follows: Technical Index Parameter: 1.Header Pipe Material: Copper , diameter 22mm 2.Riser Pipoe Material : Copper , diameter 0.8mm 3.Absorber Fins Material: Copper or aluminum 4.Surface Coating: Blue titanium or black chrome 5.Working Pressure: 0.75Mpa 6.Testing Pressure: 1.2Mpa 7.Thermal Insulation: Fiberglass , 35mm/45mm thick 8.Sealing Gasket: EPDM 9.96.3% Optical efficiency. 3.95 Heat Loss coefficient.
TUBE RESOURCES GROUP CO., LTD

China

Tube Resources Group Co., Ltd (TRG) is a leading manufacture and stockiest in China, we mainly focus on supply steel seamless tubular products. We mainly below products lists: (1)-Hydraulic, Instrumentation, Heater Tube ASTM A269/A213 -(2).Mechanical and Engineering Tube ASTM A511 (3)-Fluid Transportation Pipe ASTM A312 (4)-Capillary, High Precision Tube (5)-Ornamental Welded Tube ASTM A554 (6)-Heat-exchanger-bent Welded Tube ASTM A269/A249 -Coiled Tube ASTM A269 (7) -Stainless Steel Piping Fittings Flanges (8)-Hydraulic Tube DIN 2391 NBK Boiler, (9) -Heat Exchanger Tube ASTM A179/A192 A/A210/A213 (10)-Line Pipe ASTM A106/A53 API 5L GR.B DIN1629/DIN17175 (11)-Mechanical Tube ASTM A519/DOM A513 T5 (12)-Seamless Profile/Shaped Tube (13)-Honed Tube / Cylinder Tube DIN2391 (14)-Bundy Tube (Double Wall Tube) ASTM A254/Copper-coted, Zinc-coated (15)-Cu-Ni -90/10 70/30 Brass, Copper Tube- (16)Cu-Ni 90/10 70/30 Fitting, Flanges, Valve-(17)Nickel Alloy Tube Grade 6600/6 625 /800/H etc.
TIANJIN TIANXIN METAL PRODUCTS CO., LTD

China

we TIANJIN TIANXIN METAL PRODUCTS CO., LTD., founded in the year of 2002, with the capacity of 6000 tons/year, is one of biggest manufacturer in mental wire industry. The main products we manufacture are 0.11mm-5.0mm bright re-drawing wire in any specifications and any tensile strength, galvanized re-drawing wire, copper-coated wire, and flat wire in different zinc coating weight. It serves 2-500kg spool packages in any shape. The finished products we manufacture are stitching wire, staple wire, wooden case nail wire, brush wire, net-weaving wire, handle wire, balck annealed wire, phosphated steel wire, nail wire and wire for cleaning ball.More products in Http: //www.tjtxgy.com

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

JIANGSU FRIEND THERMAL TECHNOLOGY CO.,LTD

China

This finned coil heat exchangers can be widely used in air conditioning, heat pumps, and equipment needing heat exchanger to cool down.Diameter of copper tube for condensers: 7MM, 9.52MM, 12.7MM, 15.88MM material of tubes for evaporator: copper tube, stainless tube.Material of fins: aliuminum fin, hydrophilic coated aliuminum fin, copper fin, tin coated copper fin.The medium going through the condenser pipes: froen, water , carbon dioxide, and frozen liquid.Fin surface: louver fin and ripple fin
XIAMEN NINESUN IMP. & EXP. CO., LTD

China

NINESUN is a company based in Xiamen, China. Since 1992, we are specialized in the manufacturing and processing of non-ferrous metal materials. Besides China, we export our countries all over the world including in the United States, in Germany, in Great Britain or in Japan. We mostly manufacture copper and aluminium products as well as tungsten alloys. These products can be used for various applications, and therefore in several sectors such as electronic information, power facilities, automobiles, ships, aerospace or national defense industry. Our advanced equipment allows us to operate on more than 200 kinds of products. Over the years we have formed trusting and solid partnerships with metal material manufacturers internationally. Our customers trust our experience to provide them with precise production and processing, fast logistics and a quality after-sales service. We can also offer suggestions for the material suggestions beforehand. We deliver high quality products at the best price in the shortest deadlines possible. Thanks to the quality of our management system, we are proud to be certified according to the ISO 9001 standards. Don't hesitate to contact us for more information!

All the products for "copper coating"

high quality copper nickel strips

Brass foil sheet strip

nonferrous metal separator machine

Website See all products
GUCHENG CHANGLI STEEL WIRE CO.,LTD

China

Our company specializing in the production of various steel products, through the national quality system accreditation, We have quality assurance. Our products are sold to major domestic and foreign areas and won the praise. Inquiry welcome, We look forward to working with you for your cooperation.
DONGGUAN XINHONGYUAN METAL PRODUCTS LIMITED

China

Dongguan Xinhongyuan Metal Products Limited is a definitive source and 100% export-oriented company for custom metal stamping and sheet metal parts services with ISO 9001: 2015 quality system certification. Established in 2003 and located in Dongguan, a manufacturing center of China with 1650sqm, we provide our customers with the most excellent quality and cost-effective metal stamping and sheet metal fabrication services. Our experts handle long and short-run stamping parts, and we offer value-added services such as welding, grinding, coating, plating, and assembly to enhance durability and appearance. We manufacture metal stamping parts for various industries worldwide: household appliances, automotive, medical, and electronics, minimizing sourcing costs. We provide personalized service to our customers, combining traditional manufacturing with the latest technologies to add value to every stamping part we produce. As an OEM metal stamping company, we supply high-quality metal stamping parts used in power casings, metal housings, brackets, clips, plates, and more, using materials such as iron, steel, aluminum, copper, and galvanized steel. We are involved in all stages of new projects, from design to prototyping, short-run production, and mass production, sharing our production knowledge with customers.

Website See all products
ZHENJIANG GREAT HONEST INC.

China

Our Product lists: Coating & Paint additive Ammonium Polyphosphate ( Flame retardant chemicals ).Melamine Polyphosphate ( Flame retardant chemicals ).Chlorinated Paraffin 70 ( Flame retardant chemicals ).Di-Calcium Phosphate Anhy. ( Coating grade )Ethyl Silicate 40Melamine 99.8% min.Pentaerythritol Micronized. ( 95%, 98% ).Di-pentaerythritol Micronized. ( 85%, 90% ).Tri-pentaerythritol.M-CDEA, M-MEA, M-DEA --- ( Chain extender for Elastomeric polyurethanes, Curing agent for Epoxides ).Copolymer of Vinyl Chloride and Vinyl Isobutyl Ether ( MP-25 ).Zineb ( Biocides ).Copper Pyrithione ( Antifouling & Biocides ).Zinc Pyrithione ( Antifouling & Biocides ).Sodium Pyrithione ( Antifouling & Biocides ).Cuprous Thiocyanate ( Antifouling & Biocides ).Sodium Thiocyanate ( Antifouling & Biocides ). Aluminium Tripolyphosphate ( Antiseptic ). Glass-Flake ( Antiseptic ).Hallow Glass Microsphere

See all products

SHENZHEN XIANG XIN YU TECHNOLOGY CO.,LTD

China

Shenzhen Xiang Xin Yu Technology Co., Ltd, founded in 2008. We supply different Machining Services for more than 11 years, such as CNC Machining, CNC Milling, CNC Turning, Lathe, Stamping, Casting, Mould, Cutting, Drilling and so on. The Products we made are with different material, such as Aluminum Alloy, Stainless Steel, Brass, Titanium, Copper, Carbon Fiber, Carbon Steel, POM, Nylon, ABS, PC, PP, PETF, PEEK, Acrylic, Teflon and so on. We also supply all kinds of Finish Treatment Service after parts finished, such as Sandblast, Anodize, Hard Anodize, Polishing, Brushing, Plating, Powder Coating, PVD, Painting, Teflon Coating etc. Do you have drawings or samples now? Warmly Welcome to speak with our company for setting up business association on mutual benefit base. Selina (at) xxyuprecision (dot) com FAQ 1: What are our Advantages over others? a).We are the Manufacture, not a trading company, less cost purchase, competitive price. b).More than 11 years' Machining Experience. c).During our cooperation: We have QC depart., Sales Depart., Engineer Depart., Shipping Depart., After-Sales, Depart., to serve you all the time. 2: What Production Equipments do we own? a).CNC Machines, CNC Turning Machines, Auto-Lathes, Lathes, Stamping, Drilling Machines, CD Texture Machines, Screw Cutting Machines, Diamond Cut Machines, Polising Machines, Gringding Machines, etc. Selina (at) xxyuprecision (dot) com
TIANEN CRAFT WIRE COMPANY

China

Enameled Craft Wire - Perfect Wire for CraftingEnameled craft wire is made from copper wire or aluminum wire. It is permanently colored, and then covered with a polyurethane and nylon mixture to protect the finish and prevent tarnish. It is a premium quality craft wire with an enameled coating which provides ultra-vibrant colors and a high sheen finish. Enameled craft wire is ideal for a variety of craft use such as jeweler making and model making. It has many sizes and colors available for different applications.Enameled craft wire of different colors: pink, gold, silver, green, red, brown, purple, etc.Different colors of enameled craft wire available for different uses.FeaturesMetallic craft wire offers high flexibility and good toughness.The wire is soft enough to manipulate without the use of tools.Strong malleability for easy shaping and great for creating shapes and designs

Product recommendations

France

Germany

Germany

Germany

See more products

WUJIANG TIANLONG MACHINERY CO., LTD

China

With 26 years of experience in one-stop production, we perform die-casting, machining and powder coating in-house. Our 160 highly trained employees work in a 12, 000m2 factory with sophisticated equipment. We have been involved in die-casting since our founding in 1985, and our extensive experience has earned us the business of big industrial manufacturers, who are very satisfied with our die-cast housings. Equipment list: 8 die casting machines, 12 CNC machining centers, 18 CNC turning centers, 10 NC Milling machines, 10 NC linear cutting machines/EDMs, 6 grinding machines, 2 heat treatment equipment and 3 powder coating equipment. Materials Available: aluminum alloys, zinc alloys, aluminum profiles, stainless steel, carbon steel, copper and other forging materials.Contact us today to know more.
CHANGCHUN ANCHOR PRECISION ELECTRONIC INDUSTRY CO.,LTD

China

Anchor Copper bonded ground rod features: 1.The advanced automatic electroplating production lines and four dimensional continuous speed electroplating processes ensure the uniform coating and stable performance. 2.“Accelerate corrosion experiment” are carried by China authority department with different soil types, and the service life is proven more than 40 years.3.The factory lab is equipped with advanced analytical instruments, e.g. atomic absorption spectrophotometer, UV-Vis spectrophotometer, conductivity meter, COD meter, PH meter etc. analyzed instruments. It also includes Metallurgical Microscopy, universal testing machine, Salt Spray test chamber, and thickness tester etc. These instruments can analyze and test dozens of technical parameters during the plating production process.
ZENITH ARTS CO.,LTD

China

Empror Mirror is made of frame and mirror face. The frame is foamed by macromolecule polyurethane materail(PU). The frame which full of environmental material, light quality, waterproof and flame retardant especially wpuld not be out of shape by the weather and strong adhesion coating(do not fade and no blister). The mirror surface is conform to international plating standards, which import with raw materail of silver, copper, nickel, and even through third plating(the thickness of coating is 12 micron) bright and lustrous, tough quality, prevent from attrite or corrosion , foam and scale off. The Emperor Mirror has a good reputation by majority of consumers due to advisable material selection, superior craftwork also recombine with graceful classical appearance. There is still a number of low-grade resin frame on the market in strict control on export due to resin exist the harmful chemicals.On the other hand, resinic products will deform with flexible climate so as to impact on the q
RANCTY BINDING WIRE FACTORY

China

Rancty sells binding wire products. The range of our products are always available: binding wire, box wire, cotton bale tie wire, double loop wire tie, single loop bale ties, rebar tie wire, U type wire, PVC coated wire, etc. All the products that we offer to our clients, are strict control on quality.Our qualified staff will help with the selection of goods and give all necessary advice and guidance on the use of products. We can offer our clients a wide range of binding wire at the best prices. such as annealed wire, galvanized wire, S.S. wire, PVC wire, welding wire and copper wire. Strict quality control, product quality to meet international standards, we have the full implementation of ISO9001 quality management system and ISO14001 environmental management system, to obtain international certification. In our factory there are three pillars of work: High quality of all goods and services; Reasonable pricing; Careful attention to every clients.
BAODING NINGXIN NEW MATERIAL CO.,LTD.

China

Baoding Ningxin is specially dedicated to manufacturing molten metal filters since 2002. We offers a complete range of foundry filter products and services. The product ranges from very cost effective fiberglass mesh filter to high filtration efficiency ceramic foam filter.Our company is ISO9001: 2008 certified and products had been passed the authorized inspection in China. Our foundry filter lines are as follows: -Aluminum filtration cloth filter in rolls, pre-cut sheet or special shapes like cap, tubular or funnel etc. with or without resin coating or non smoke process. -High silica fiberglass mesh filters for iron and small scale steel castings, in pre-cut sheet or special cup shapes. -Silicon carbide ceramic foam filters for iron and copper casting filtration. -Alumina ceramic foam filters for foundry or cast house, size from 7"x7"x2" to 23"x23"x2". -Zirconia ceramic foam filters for steel casting filtration. -Extruded ceramic filters for aluminum and iron filtration.
ZHEJIANG NANOU METAL POWDER CO.,LTD

China

Zhejiang Nan'ou Metal Powder Co., Ltd was called Southem Europe Metal Powder Factory, which was established in 1998, It is the only specialized factory of Zhejiang province, which engages in copper powder product research, development, and production for long-term profits.With the largest scale, the most varide options, the best quality, the company introduces the international advanced production line and testing system, promotes the production equipments and technologies comprehensively, becomes the Iargest copper alloy powder production base in Asia. The bronze powder product of the company is a scale super fine metal paint processed by electrolytic copper, zinc and othe metals, It is mainly used for printing dyeing, painting, coating, coloring plastic and other industries.It can be used for home appliances and car shell coating as well.The product becomes popular among customers because of the thick full cover effect and strong metallic sense.
SRPING (HANGZHOU) WELDING MATERIAL CO., LTD

China

Spring is a China Company, Leader in the field of consumables for BRAZING, SOLDERING and WELDING technologies. Operating from more than 15 years, we have reached a very wide experience in BRAZING and SOLDERING.We can offer a complete and full line of products, including rods (bare and flux-coated), wires, strips, rings, performs, pastes, fluxes.We can supply both standard and special alloys of the following groups: silver based (with and without cadmium), copper-phosphorous, copper based, brass, bronze, aluminum, nickel, tin, and others. Best quality and conformity with the main international standards are basic features of our products.We can afford technical assistance in every step of your operations, especially in choosing right brazing materials and processes. The quality of our organization is testified by the ISO 9001 Certification.Our headquarters are located in the south of China, near from Shanghai City, from where we currently supply Customers in more than sixty countries wo
GUANGZHOU MAGTRUST MAGNET CO., LTD.

China

Located in Guangzhou City in China, Magtrust is able to provide all kinds of magnets at competitive prices. Composite: Neodymium, NdFeB Model Number: N35-N42 Magnets coating: Zinc, Nickel, Epoxy, Nickel-copper-nickel, Gold Magnetizing direction: Axial, Radial, Quadrupole, Octupole Em: info(a)magtrust.com msn: bestoneil(a)hotmail.com Guangzhou MagTrust Magnet Co., Ltd. is a Chinese manufacture for NdFeB--- rare earth permanent magnet, found by domestic famous specialist. We can make thousands specification of NdFeB product, especially for small specifications. We specialize in this field for several years, with good quality and pretty competitive price.

TOPRINT PRINTING(SHENZHEN)CO., LTD

China

Toprint printing (shenzhen) Co.Ltd. is a professional manufacturer in Shenzhen, China with more than 15 years printing experience.Our modern equipment including Heidelberg 600 UV coating machines, German Roland printing press, Pneumatic puncher, fully automatic gluing machine, JENKY stickers Rotary printing machine, etc. We love to work with customer who wants to make special package. All kind of paper material are available to select, like art paper, copper mirror paper, card board, pearl paper, synthetic paper, etc. All the material could be passed RoHS, REACH, SGS, if the customer required. On the other hand, our designer can help you design the artwork if you only have a rough idea for the product.Our factory location is near the Bao’an international airport. Warmly welcome our customer visit and audit ours. We are looking forward to building a long-term cooperation with customer from all over the world.
HANGZHOU HOONYA APPLIANCE CO., LTD

China

Product information is as below: 1. Product Category: Fin-tube heat exchanger, condenser, evaporator, and radiator.2. Product Model: Single fan, double fan, fourfold fan, V-shape and Horizontal type, etc.3. Application Fields: Widely used in air conditioner, refrigeration products as refrigerator, freezer, display cabinet, water dispenser, and air conditioner in transportation equipments as automobile, steamship, rail transit.4. Texture Detail: Copper tube and aluminum foil with different coatings (bare, hydrophilic film, inorganic membrane).5. Product Feature: Select aluminum fin and copper tube of high quality; Adopt mechanical tube expanding, and second flange technology; Professional designing of tube pitch and fin pitch; Shell made of high-quality sheet material after stamping, through strict chemical rust prevention processing.Therefore, our products have such good characteristics as compact structure, efficient heat diffusion, UV blocking, anti-corrosion.
SUCCESS PRECISION ENGINEERING CO., LIMITED

China

1) Material: Different kinds of stainless steel, steel, brass or aluminum etc2) Equiment: CNC, machining machines, grinding machines, milling machines, Wire cutting machines3) Surface treatment: Polishing, zinc plating, nickel plating or chrome plating, phosphating, passivation, etc4) Finishing with plating of Nickel, silver, copper, zinc .etc. and anodized , powder coated, polished , sand blasted, chemical surface treatment. as customer's requests.5) Quality assurance in accordance with ISO9001: 2001 and ISO9001: 20086) Part size: Diameter from 0.5mm to 600mm7) Tolerance: Can be kept in +/-0.01mm8) Experienced technology engineers and well trained workers.
NINGBO YINZHOU TENGKAI METAL PRODUCT CO., LTD.

China

1. Material: aluminum & aluminum alloy, copper & copper alloy, steel & steel alloy. 2. Process: sand casting, investment casting, lost wax casting, permanent mold casting 3. Machining capability: CNC Machining Center, CNC Precision Lathe, CNC Drilling and Tapping, 4. Heat treatment: T6 heat treatment 5. Surface treatment: polishing, mill finished, machined, sand blasting, powder coat, painting etc. We can machining and/or supply various kinds of metal parts according to your drawings or sample with high-quality, competitive price.We also accepting small order. Our strong R&D and QC department can control the products to meet your strict requirement or ISO9001 standard. And we also offer the engineer consultation to your design for production improvement and cost saving. Delivery time: 45 days after confirmation of order andd drawings. Applied software for specification drawings: Pro/E, Auto CAD, Solid Work; CAD/CAM/CAE,
YONGJIA BAITONG VALVE CO., LTD.

China

BAITONG VALVE is a manufacturer specializing in all kinds of industrial valves. After years of experience in supplying valves for distributors and projects, BAITONG VALVE has been recognized as a skilled and responsible supplier. The reputation relies on our strict inspection procedure from CAD design, material purchasing, machining, assembling, hydraulic & air testing to packing & delivery. Each step is carried out by our experienced and dedicated craftsmen. We offer various types of valves in different materials, including special materials like MONEL, INCONEL, duplex, copper, bronze, etc. They are manufactured according to standards such as API, ANSI, DIN, BS, and JIS. We are capable of supplying valves with special testings and treatments like radiographic examnation (RT), ultrasonic examnation (UT), dye penetrant testing, low temperature impact testing, XYLON coating and PTFE coating. Look forward to having a chance to serve your esteemed company.
SUZHOU XINCHANGSHENG PRECISION HARDWEAR CO., LTD.

China

Our company introduces the Japanese advanced NOMURA machine tool, provide high precision, and complex non-standard products. OEM: You just give us the drawings or samples, we give you the satisfactory product with Competitive price. CNC machined parts, CNC turned parts, precision parts. Perfect quality control (ISO 9001: 2000). OEM: We manufacture precision parts as per customer drawings, sample. Material Range: Carbon Steel, Alloy Steel, Stainless Steel(SS-304/SS-302), aluminum, gray iron, ductile iron, alloy copper, Brass, Bronze, UNSC11000Copper. Operation: CNC Machining, Planning, Grinding, Turning, Drilling, Milling FinishCode: Polishing, Z: Zine-Plated, Ni: Ni-Plated, Tin-Plated, GreenIridite, RadiantPlated, Passivate, Chrome Plating, Polished Brass, Electrophoresis, Dichromate, Painting, Powder Coating, Phosphating, Anodization.
QUZHOU KINGSOON PRECISION MACHINERY CO., LTD.

China

aluminum, steel, copper, plastic, carbon steel, nylon, bronze, solder alloy, HSS, tool steels, or as per the customers’ requirements. Dimensions According to customer’s drawing Surface treatment Heat treatment, polishing, PVD/CVD coating, galvanized, electroplating, spraying, and painting and so on. Packing Wooden box, or as per the customer’s requirements Processing equipments CNC machining center, CNC lathe, grinding machine, automatic lathe machine, conventional lathe machine, milling machine, drilling machine, EDM, wire-cutting machine, CNC bending machine etc. Service project To provide production design, production and technical service, mould development and processing, etc. Testing machine Digital Height Gauge, caliper, Coordinate measuring machine, projection machine, roughness tester, hardness tester and so on. Minimum order quantity negotiable Delivery 7-15 days after T/T 30% deposit Payment T/T 30% deposit
JORGANTRONICS ELECTRONICS CO.,LTD.

China

Jorgantronics Electronic（ShangHai） Co., Ltd.is a professional PCB manufacturer in china, our products include sigle-dide, double –side board, multilayer boards (1-40layers) , High-density multilayer PCBs and Aluminum base PCB . Various material coating form Neclo and rogers, as well as FR4, halogen –free and PTFE aluminum base type and more. We also offer high –frenquency and copper boards etc..Our products are widely uesd in telecommunications, computer, networking, consumer electronics, and industrial controls, automotive, home appliances and other industries. Especilly aluminum based PCB for led. We also can provide PCBA for led. Our monthly capability is 20000 square meters of rigid type PCB, and 10000 square meters for Aluminum base PCB. We have no minimum order quantity limit for prototypes. We can provide fast prototype service and mass production. Welcome any type of customer contact us. We have got ISO9001/2000, ISO140001: 2004, American UL certification, and our products confor
BAIJI TAIHE NONFERROUS METAL CO.LTD

China

The main products: titanium, nickel, tungsten, zirconium, molybdenum, and titanium alloy tube, titanium alloy plate, titanium alloy bar, titanium alloy wire, titanium foil processing various shaped pieces of seamless tube, nickel tube, titanium ring, titanium forgings, titanium standard parts, titanium flanges, coils, titanium equipment, coating target, alloy target, target, target of chromium, titanium tube target, nickel tube target, such as chromium copper target.. Besides, the company can do surgery titanium medical implants. Quality management system in accordance with ISO9001: 2000 version of standards and products reach the national and international standards. The company has a high starting point, high technology, keep promise "customer satisfaction, continuous improvement, innovative development, " integrity and quality service for the direct creation of customer value and struggle, warmly welcome all friends to guide our company to negotiate an accomplice development, crea

Find quotes for

Filters

Results for

Copper coating - China

Number of results

29 Companies