Results for

Drawn parts

17 Companies

42 Products

Product recommendations

China

Germany

Germany

Body parts for writing instruments made of aluminium

Germany

See more products

BADE UND RINSCHEID METALLWARENFABRIK GMBH

Germany

We process belt and sheet material from 0.2 to 6 mm sheet thickness. We have invested in optimised machine units especially for processing aluminium strips, but not only for this purpose. Automatic punching presses, hydraulic presses and eccentric presses with pressing forces up to 3150 kN process belts/coils up to 600 mm wide. Tight dimensional tolerances, high flatness requirements and other technically demanding quality features are produced by us and partly controlled "in line". With our cleaning systems, which use organic, CHC-free cleaning agents in an environmentally friendly manner, we are also able to meet special cleanliness requirements – based on current standards for residual dirt identification. Through responsible management, we ensure that high quality standards – based on customer requirements – are achieved. Flat structures ensure careful, target-oriented and fast implementation of our customer orders.

Website
AHA ALBERT HAAG GMBH METALLDRÜCKEREI - METALLWAREN

Germany

We draw, punch, stamp, spin We process steel, metals and sheets With economical batch sizes, deep drawing is an effective alternative to metal spinning. Typical characteristics include high levels of precision, constant material thickness and fast production times. Our other products include: Forming technology, metal hemispheres, metal funnels, metal spun parts, pressed parts, stamped parts, drawn parts, apparatus and container manufacturing, machining and processing sheet metal, metal forming, etc.

All the products for "drawn parts"

Two-part drawn part

Deep-drawn

See all products
EUROTEC SPANNRINGE GMBH

Germany

Eurotec Spannringe GmbH was founded on 02.09.1997. The company employs a workforce of 48 people, who work on a 5000-m2 covered production area to produce packaging accessories. The company's main activity is the production of straining rings. Our products include: • Flip handles • Toggle fasteners for pipes • Cotter pins • Straining rings and clamping rings • Fasteners • EPDM waterproof sheeting • Metal handles • Stamped parts • Drawn parts • Accessories for barrels

See all products
J. C. KÖNIG STIFTUNG & CO KG

Germany

We create precision deep-drawn parts made from stainless steel, steel and non-ferrous metals at our modern production sites. Our production focuses on thin-walled and usually rotationally symmetrical hollow parts with wall thicknesses of between 0.15 and 2.3 mm. In doing so we not only implement the tightest tolerances regarding dimensions, shape and position, we also meet the high surface quality requirements of the components. The component cleanliness we need to achieve is also very important here. If required, the surfaces of the components are mechanically or galvanically reworked. Every year, our company processes roughly 1200 t of stainless steel, 1800 t of steel and 80 t of non-ferrous metals. Our employees' expertise, in conjunction with cutting edge production systems, enable us to produce highly complex geometries which can require more than 20 forming steps in extreme cases. And we achieve all this while meeting your precision and quality requirements.
JVS SALES & TECHNICAL CONSULTANTS GMBH

Germany

JVS represents leading manufacturers and design companies on the European market. Together with our partner companies, we support customers in the development and production of innovative and technologically advanced products. Specialising in precision deep-drawn parts, micro springs, wire forms, micro silicone parts and metal-cutting, we meet even the tightest tolerances. When it comes to ultrasonic machining, our partner Bullen Ultrasonics Inc is one of the leading providers of high-quality components for the semiconductor, MEMS and sensor industries. Our isostatic and mechanical powder compaction presses and the thermal process systems (industrial ovens) from Gasbarre Inc are among the market leaders in ceramics and the carbide industry. With high-end LED modules and high-performance lenses for PIR applications, we are also represented in the lighting and motion sensor technology industries. We look forward to your challenges!

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

F. GLADTFELD GMBH METALLWARENFABRIK

Germany

Welcome to F. Gladtfeld GmbH Metallwarenfabrik. Thank you for your interest in our products. We would be happy to answer any questions you may have. Please contact us. Our products include: Sheet metal labels; seals; price holders; pressed parts; embossed plates; stamped parts; tool brands; drawn parts
GLOBAL METALL GMBH

Germany

Global Metall Gmbh is an internationally active dealership with more than 30 years' experience dealing in specialist steels and non-ferrous products: dealer in welding electrodes, dealer in drawn wires, dealer in bright steel, drawn precision profiles, forged parts for shipbuilding, forgings for petrochemical components, tool steel to customers' requirements, forged flat steel, steel for heat-treatable springs, forged flat steel, cold-headed wire, forgings for energy
GRAF GMBH

Germany

GRAF GmbH is a manufacturer founded in 1992 that is active in the sector of steels and metals – forming and stamping. It is also involved in the sectors of belt buckles, springs, wire springs, fasteners and buckles, small stamped parts, deep-drawn parts made from stainless steel, shoe buckles, bent wire parts and welded buckles for leather goods. Its headquarters are located in Werdohl, Germany.
ALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH

Germany

Our patented casting resin system, ALWA MOULD D, is the fastest curing casting resin system in the world. It is very easy to process and does not need to be post-tempered. Our easy to use system has a pot life of only 20 minutes! Deep drawing can take place immediately after demoulding. From 1 to 2500 kg, everything from large bathtubs to small chocolate moulds can be cast. Commercial vehicle manufacturer Aixam has been successfully working with our system for years. With our innovative ALWA POR porous plates, the time-consuming drilling of vacuum holes is no longer necessary. They impress with high stability, compressive strength and a permanent temperature resistance of over 190 °C. ALWA POR is suitable for vacuum deep drawing and forming processes as well as aeration for aquariums, fish ponds and sewage treatment plants, ventilation of injection and blow moulds, all processes with hot air and steam, vacuum clamping technology, filter applications, air film sliding technology, foundry, etc.

Website See all products
MBK VERPACKUNGEN GMBH

Germany

Our sphere of activity has always been plastic packaging for the cosmetics and pharmaceutical industries. Customers who come to us needing a tube, drum or bottle made of plastic are in the right place. We are an owner-managed traditional company and have been operating in the market for over 40 years. Highly qualified and dedicated employees are the cornerstone for ensuring we provide our customers with optimum support. We identify requirements, offer customers solutions to their problems and implement these solutions in a short time period. Service, quality and performance are, and will always remain, our basic principles. Thanks to innovative, project-related processing, supported by a modern ERP system, we can always respond to current changes and advise our customers accordingly. In addition to the extensive range of different, individual tubes, bottles, cans and jars as well as sachets and refill packs, we recently started offering high-quality thermoformed parts for a wide variety of applications.

Website

LESJÖFORS INDUSTRIAL SPRINGS & PRESSINGS GMBH

Germany

Die Lesjöfors Group is one of the largest manufacturers of technical springs in the world. Our range of products in spring technology includes wire and leaf springs, punched and bent parts, and gas springs. Our experience in spring manufacturing dates back to 1852. Today, over 1800 motivated employees ensure that everything from technical design and spring calculation through to dispatch runs smoothly and professionally. Thanks to our many years of experience in springs, stamping technology and bending technology, we provide our customers with customised solutions which can be implemented in a timely manner due to our flexible production capacity. We are active on the international stage with regard to continuing globalisation. Currently, we have production and sales sites in Sweden, Finland, Norway, Denmark, Germany, the Netherlands, Great Britain, Slovakia, Latvia, Russia, China, Thailand, Singapore, Mexico and the USA .

All the products for "drawn parts"

Deep drawn parts

Website See all products
JOS. SAUERWALD SÖHNE GMBH & CO. KG

Germany

We have been processing plastic films and sheets for more than 45 years. One of our areas of focus is the production of packaging, which we manufacture in the broadest sense through forming processes via the deep-drawing method. We process material thicknesses of 0.2–12 mm on high-performance automatic rolling and sheet preparation machines. The maximum forming area is currently 1500 x 2400 mm. The vacuum forming technology is supplemented by post-processing techniques, such as pressing, milling, bending, gluing, welding, sealing, joining through to contract packaging. From the first design to CAD design, prototyping, moulding and through to the final packaged product, we also implement our customers' unusual requests. The trading company supplements this range of services with its own range of plastic injection moulding packaging and plastic pouches. We are also happy to provide custom solutions made from cardboard products, paper, sheet metal, non-woven fabric, nylon or wood.

Website

Product recommendations

Germany

China

China

See more products

AGOFORM GMBH AUGUST OTTENSMEYER

Germany

With the highest level of plastics expertise, 90 years of experience and continuous further development, AGOFORM has established itself as a high-performance partner to the furniture industry on the international market. With the objective of offering customers the optimum solution for different, personalised usage purposes, AGOFORM develops perfect products for designing more comfortable living spaces – from countless deployment systems for diverse applications right up to anti-slip mats. In terms of transport technology sectors, AGOFORM offers solutions for caravans, industrial vehicles and construction and agricultural machinery. Our wide range of products and experience is rounded off by the fields of gardening and landscaping, goods carriers (small load carriers) and electrical and medical technology, as well as logistics, advertising and decorating. With the highest quality requirements at all times, always with regard to sustainability and constantly looking to the future.

Website See all products
N&H TECHNOLOGY GMBH

Germany

As a reliable systems supplier of customised products, we can help to develop your ideas from their initial phase through to series production. We particularly focus on the implementation of customised operating units. To this end, our services include the manufacturing of electromechanical assemblies and the procurement of all other components required. Furthermore, we will of course support you in the manufacturing of individual components – true to our guiding principle of being able to offer everything as a sole supplier. As a typical example, we can provide input devices that, along with keyboard elements, include a display, housing, analysis electronics and complete connection systems with cable assembly. We rely on cost-efficient manufacturing at selected production sites in Asia. All these production facilities are certified in accordance with ISO9001, ISO14001, TS16949 and ISO13845. The European quality standards of our products are guaranteed by a comprehensive QA system at these plants and in-house.

All the products for "drawn parts"

Metal Parts

Plastic Parts, Moulded Parts

Website See all products
OSSENBERG & GREFE GMBH

Germany

Our company was founded in 1864 as F. Ossenberg & Co. KG, and is now in its fifth generation of family ownership. Since the acquisition by Julius Grefe KG in 1997, we have traded under the name "Ossenberg & Grefe". We are naturally certified in accordance with ISO 9001. The original manufacturing programme for both companies consisted of buckles, rings and hooks for the textile and leather processing sector. Over time, articles for other areas of application were added to the product range. Today, alongside our standard range of products, we specialise in the manufacturing of wire-bending, punching and assembly products for more than 1000 customers from a wide variety of sectors. To this end, our 60-strong team manufacture approximately 500, 000 parts a day over a production area of 5000 m². Thanks to our versatile machining options, in-house tool manufacturing facilities and electroplating equipment, we are able to find quick and cost-effective solutions to complex challenges.

Website
ARA-T ADVANCE GMBH

Germany

ARA-T Advance GmbH is your expert point of contact for contract manufacturing for all types of special materials. We provide half-finished products, manufacture parts according to drawings and also provide various metalwork solutions and sand and pressure die casting services. Since 2005, we have been supplying customers around the world with small and bulk quantities of parts, some of which are immediately available from our warehouse in Dinslaken in western Germany. We manufacture parts in accordance with national and international norms and standards, such as DIN, ISO, EN, NORSOK, ASTM and AMS. Please get in touch with us and we will be happy to prepare a suitable range for you. Contract manufacturing: Titanium (half-finished products, components, films, round bars, wires, screws, nuts, Ti-AMS 4911, tantalum, zirconium, niobium, tungsten, molybdenum, copper, nickel, stainless steel, alloys, sintered alloys).

Website
WACHTENDORF & SCHMIDT GMBH

Germany

Wachtendorf & Schmidt is a medium-sized family-owned business that has been in the metal working industry since 1938. We specialise in manufacturing compressed parts and cold-heading parts. Our DIN EN ISO 9001, QS 9000 and TS 16949 certifications are just one of the reasons that renowned companies in the automotive industry are among our regular customers worldwide. Our product range includes custom solutions for various industries, such as the furniture industry, construction materials industry, advertising industry and the electrical industry.

Find quotes for

Filters

Results for

Drawn parts

Number of results

17 Companies