Results for

Mechanical fluids - Manufacturer Producer - Germany

9 Companies

28 Products

E.I.TEC. GMBH ENERGIE- UND UMWELTTECHNOLOGIE

Germany

Founded in 1995 by fellow engineers Frank Grosch and Ralph Wolfrum, the company has come to focus on designing, building, fully installing and commissioning systems for flue gas purification and energy recovery. Our systems are being put to work not only in western and eastern Europe, but also in North America, Asia and Australia. Our technical team is made up of process technology engineers, fluid mechanical engineers and electrical engineers, as well as chemists, physicists, designers, technicians and draughtsmen, all of whom are experts in their field. To ensure our high quality standards are maintained, our systems are subject to continuous checks and interim acceptance tests during production. This results in high levels of availability and safety in our systems.

Website
KMD PLASTIFIZIERUNGSTECHNIK GMBH

Germany

KMD Plastifizierungstechnik GmbH develops and manufactures high-quality spun-bond, melt-blown and composite systems, as well as extruders and fibre spinning lab equipment. KMD has a highly effective R&D team with extensive experience and expertise in a variety of areas, including mechanical engineering, fluid technology, fine chemicals engineering, plastics technology, synthetic fibres, nonwoven technology, textiles, automation, etc. Besides our internal activities, we are also involved in these fields in many joint R&D projects with universities in Europe, the USA and Asia. Thanks to this interdisciplinary cooperation where we complement each other's strengths, we were able to significantly increase efficiency and success when implementing our own projects. KMD's technologies and products are based on this, and this is what KMD is all about.
KENDRION KUHNKE AUTOMATION GMBH

Germany

Kendrion Kuhnke Automation is your specialist for magnet, fluid and control technology and offers safe, precise and innovative components and assemblies for a wide range of applications. Kendrion Kuhnke Automation is part of the industrial division of Kendrion N.V. und trades under the Industrial Actuators and Controls (IAC) business unit. When it comes to developing and manufacturing electromagnets and actuators, IAC benefits from over 100 years of experience and offers a wide range of products. In addition, IAC is a fluid technology manufacturer specialising in the development of custom valves, valve blocks and pressure regulators. In the field of control technology, IAC uses the internationally recognised industry standards in order to enable integration into a wide variety of infrastructures, as well as inductive heating systems that enable emission-free heating in industrial processes. Our products are primarily used in medical equipment, such as dialysis machines, anaesthesia machines, respirators, dental units, treatment equipment and therapy equipment. They are also used in automation and robotics, such as for FTS, material handling systems and cobots. Furthermore, they are used for mechanical engineering in the food and drink industry, in printing and paper processing and in the textile industry. Further applications include fire protection and access controls in building technology and emergency oxygen supply and in-cabin applications in aviation. Find out more about Kendrion at www.kendrion.com

All the products for "mechanical fluids"

Pneumatic Short Intervall Timer (3/2-way NC, subplate)

Mechanically Actuated Valve Type 42

Pressure Regulator for subplate mounting

Solenoid valves, pilot operated Type 63.1V

Solenoid Valve Type 63.1

Website See all products
PREMOEM GMBH

Germany

PREMOEM GmbH specialises in production, sales, service and engineering consultancy in mechanical engineering and supplies hydraulic components for many industrial applications in fluid technology. Our team comprises commercial and technical experts with many years of professional experience in mechanical engineering, who develop custom technical solutions together with our customers. In conjunction with precisely matched material properties and perfect design, our products guarantee lasting functional reliability due to precision manufacturing. Our exclusive European partners work together to technically develop and produce these products in their plants. In addition to small and medium-sized OEMs. Our customer base also includes specialised equipment and workshop customers across Germany and the whole of Europe. Our product range: - Screw joint technology - Valve technology - Cylinders - Coupling technology - Clamps - Ball valves - Hose lines - Special components built to customer specifications.

Website
WELTE CARDAN-SERVICE GMBH

Germany

The Welte Group is a leading company in the sectors of articulated shafts and fluid and pipe-bending technology with several sites in Germany and Europe. Managing Director: Alfred Welte Dipl. Eng.(technical college) and Egon Welte Jnr. Dipl. Eng.(technical college) Founded in: 1921, Employees: Approx. 400, 15 sites in six countries. Express service within 24 hours. Our main priority also happens to be our guiding principle: "There is always a solution". Our product areas include: • Articulated shafts/cardan shafts • Pipe-bending technology • Hydraulics • Tubing technology • Screw fittings • Filters • Radiators • Automotive technology • Lifting gear • Eddy current brakes. Our products/services include: Articulated shafts/cardan shafts (repairs), repairs to hydraulic pumps, hydraulic components, repairs to transmission shafts for cars, DC hydraulic units, chloroprene hoses, transmission shafts for mechanical engineering, design of hydraulic units, hose lines, hydraulic screw fittings, hydraulic oil services and PTFE (PFA) tubing

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

MSM MARKIER-SENSOR-SYSTEME GMBH

Germany

We have been developing, producing and selling industrial labelling systems and sensors since 1991. MSM Markier-Sensor-Systeme GmbH is a medium-sized company with an international focus and a leading manufacturer of marking technology. Our areas of expertise are the development and production of marking systems, marking devices, identification and labelling systems, marking fluids as well as technical labels and optical sensors. We stand out thanks to our many year of experience and presence on the market, and due to the high degree of vertical integration in relation to the size of the company. Thanks to our standards and the complexity of our products, we consolidate a high level of expert knowledge in our departments and can therefore guarantee the highest quality from a single source. Our company's customers from the automotive, plastics, wood and metal industries, mechanical engineering and other industry sectors receive complete and high-quality solutions across the globe.
SEPARATOREN-TECHNIK & ANLAGENBAU GMBH

Germany

STA, a family-managed mechanical engineering company with over 40 employees, has stood for customer-orientated conduct since 1992. With application expertise and meticulous system design, we successfully integrate our solutions into the production processes of our customers. Thanks to modern engineering resources, specific customer requirements can be quickly and reliably fulfilled. Based on experience from over 2000 separators installed worldwide, and taking into account current safety standards, we develop high-performance, durable and safe machines. We research the fluid dynamics in our machinery and carry out comprehensive field tests – in this way, we can ensure that STA separators remain the most high-performance devices on the market in the future. We guarantee our high quality standards through our own value creation in our production area, measuring over 800 m² in size, and through certified processes (WHG 19 L, ISO 9001).
FF FLUID FORMING GMBH

Germany

In 2002, the company FF Fluid Forming GmbH was founded. We are a medium-sized enterprise based in Lastrup in Cloppenburg, North Germany. We were able to successfully combine our expertise in mechanical engineering and hydraulic and electronic control technology within the field of high-pressure sheet metal forming processes. With our new machine concept – the FormBalancer – we are able to control high clamping forces of up to 80, 000 kN (8000 t) in hydroforming pressing processes with up to 4000 bar. This process can produce formed sheet metal with complex geometric structures . We are active all over the world and have a large pool of knowledge and experience across a wide variety of industries. Individual customer solutions are central to our profession.
WENGLOR SENSORIC GMBH

Germany

We develop intelligent sensor technologies, security systems and image processing systems for industry around the world according to cutting edge communication standards. Thanks to innovative world-class products, we efficiently develop solutions to fulfil both extraordinary and standard requirements. We have been providing small and medium-sized businesses, as well as international corporations, with exactly the right products for over 30 years. Besides photoelectronic and inductive sensors, our core areas of expertise also cover ultrasonic and fluid sensors, image processing systems, barcode and 2D/3D code scanners and security technology. Our goal is to supply customers with innovative solutions – every day and everywhere around the globe. As a result, renowned automotive and food companies, pharmaceutical companies and mechanical engineering industries consciously place their faith in our products. Companies in the conveying technology, beverage, wood, electrical, plastics, textile and packaging industries also rely on our products.

Find quotes for

Filters

Results for

Mechanical fluids - Manufacturer Producer - Germany

Number of results

9 Companies