Results for

Standard springs - Germany

24 Companies

31 Products

Product recommendations

Germany

Germany

See more products

LESJÖFORS INDUSTRIAL SPRINGS & PRESSINGS GMBH

Germany

Die Lesjöfors Group is one of the largest manufacturers of technical springs in the world. Our range of products in spring technology includes wire and leaf springs, punched and bent parts, and gas springs. Our experience in spring manufacturing dates back to 1852. Today, over 1800 motivated employees ensure that everything from technical design and spring calculation through to dispatch runs smoothly and professionally. Thanks to our many years of experience in springs, stamping technology and bending technology, we provide our customers with customised solutions which can be implemented in a timely manner due to our flexible production capacity. We are active on the international stage with regard to continuing globalisation. Currently, we have production and sales sites in Sweden, Finland, Norway, Denmark, Germany, the Netherlands, Great Britain, Slovakia, Latvia, Russia, China, Thailand, Singapore, Mexico and the USA .

All the products for "standard springs"

Quality on demand

Compression Springs

Innovative gas springs for tooling

Website See all products
FWH FEDERNFABRIK WILHELM HESSE GMBH

Germany

The company Wilhelm Hesse is a spring manufacturer in south-eastern Saxony, Germany, close to the border with Poland and the Czech Republic. We can look back proudly on a tradition that stretches back over 130 years. The entrepreneur Friedrich Wilhelm Hesse founded the company in 1887. After forced nationalisation in 1972, the private company was re-privatised on 1st July 1990 by the founder's great-grandson, Mr Werner Siche (died 16th April 2013). In 2006, he was able to commission the new production facility in Ebersbach-Neugersdorf. Prior to 1990, we were already an important supplier for switching electronics, automotive engineering, the automotive industry, textile mechanical engineering, rail vehicle construction, armature and valve construction and many other industry sectors. Since 1990, we have been constantly modernising and expanding our production facilities. We have experienced and specialist staff, as well as special software, to help us to advise customers and to develop, calculate and produce springs. Our efficient quality assurance system guarantees that our products are of a consistently high quality. This system was established on the basis of DIN ISO 9002 and introduced in 1994. Recertification according to DIN EN ISO 9001: 2015 was successfully completed in 2016. Our active membership of the Verband der Deutschen Federnindustrie (Association of the German Spring Industry) enables us to have all of the important and current information concerning spring manufacturing and development.

All the products for "standard springs"

torsion springs

compression springs

tension springs

Website See all products
MONNINGER FEDERN GMBH

Germany

Monninger has been the expert company for stainless steel and steel springs for more than 75 years. Experience, customer relations and quality awareness have always formed the basis for our success. We were certified in accordance with ISO 9001 for the first time 1994. With our ISO/TS 16949 certification in 2012, we entered a new era which continues to influence everything we do. The solid company has long since become a brand which has made a name for itself both among customers and expert groups. The company's good reputation is based on solid constant factors which have been in place from its foundation in 1945 to today: Precision. Dynamism. Engineering spirit. Enabling dynamics. It is time to more intensively devote ourselves to these key skills, to strategically orient the company towards the future and to position the business in a manner that is externally visible. In close collaboration with brand consultants solldesign, Monninger has prepared a brand relaunch which creates an identity and sends clear signals.

Website
SPIROL

Germany

Our aim is to be the best company in our field with regard to product quality, service and value by exceeding our customers' expectations through a process of continuous improvement. SPIROL is a global manufacturer of precision securing and connecting components, discs, installation equipment for connecting elements and feeders. Thirteen production sites/sales offices in twelve countries produce approximately 2 billion metal components every year. More than 60 years experience in the construction of spring pins and manufacturing technology. SPIROL International provides an engineering service to help its customers find solutions for unique constructions and product applications. The aim of Spirol is to help customers achieve their business goals by improving performance while reducing the costs of connecting elements, assembly processes and interconnected parts.

All the products for "standard springs"

Standard Duty Coiled Spring Pins

SPIROL Standard Slotted Spring Pins

ISO 8752 Slotted Spring Pins

DIN EN 16983 Disc Springs

Stainless Steel Disc Springs

Website See all products
ACE STOSSDÄMPFER GMBH

Germany

We damp everything except for your expectations. ACE is a globally recognised specialist in the area of industrial damping technology – represented in 45 countries on all continents. ACE has been a highly successful player on the German market since 1978. In this country alone, 25 engineers work day-in-day-out on advancing the product range. ACE customers benefit from sophisticated solutions, valuable innovations and exemplary service in relation to damping technology. Through its close collaboration with leading mechanical engineering companies, the German ACE branch has recently established itself as the pioneer in state-of-the-art technology. The advantages for customers are obvious: Expert technical advice on site and on the phone, customer-specific design, delivery without any minimum quantities from one unit upwards in the shortest possible time, sophisticated installation and functional accessories, realistic prices

All the products for "standard springs"

Industrial Gas Springs – Pull Type

Industrial Gas Springs – Pull Type

Industrial Gas Springs – Pull Type

Industrial Gas Springs – Pull Type

Industrial Gas Springs – Pull Type

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

CARL STAHL KROMER - GERMAN MADE SPRING BALANCERS

Germany

About us We are a medium-sized industrial company based in Gottenheim in southern Germany. We have been one of the leading international manufacturers of tool balancers and tool retractors (spring balancers) for many years. Our company history goes back to the 19th century - in the long period of our existence we have gained a lot of experience and knowledge. Because we concentrate 100% on what we do best, our customers can rely on the highest quality and safety. In 2000 we became part of the large Carl Stahl Group with over 1, 800 employees worldwide. We benefit from our traditional, medium-sized entrepreneurship, as well as from the secure structures of a global corporation. Our products Our product range includes spring balancers and balancers in standard designs such as air spring balancers with compressed air hose, stainless balancers, ATEX balancers, cleanroom Balancers and positioners. In addition, we offer individual product solutions and product training. Quality means sustainability We are convinced that we are on the right track with long-lasting products, which are geared towards customer benefit, and that we will continue to adhere to this philosophy in the future - for satisfied customers and for the love of our environment. Environmental Protection We have a functioning and tested environmental management system and are certified according to ISO 14001 & bear the seal "CO2 neutral company"

All the products for "standard springs"

Retractor Type 7211

Retractor Type 7200

Retractor Type 5200

See all products
DIETZ GMBH

Germany

Spring manufacture requires a very high degree of precision in order to meet all the requirements of complex structures while remaining functional. Due to rising demands on quality, we are continuously further developing our materials and products. Their functionality is safeguarded by frequent quality tests. Of course we are happy to provide you with the test results. In manufacturing springs and bent wire parts, we guarantee that our products keep the promises they make. Our objective is to have maximum supply security and for our customers to have the lowest possible level of processing expenses. We pursue this with our database-supported inventory system – in the raw materials warehouse as well as the warehouse for completed components. Thanks to our streamlined structures and processes, we are able to react to your logistical requirements in an especially flexible way.

All the products for "standard springs"

Compression springs

Wave springs

Bent wire parts

Torsion springs

Extension springs

Website See all products
N&H TECHNOLOGY GMBH

Germany

As a reliable systems supplier of customised products, we can help to develop your ideas from their initial phase through to series production. We particularly focus on the implementation of customised operating units. To this end, our services include the manufacturing of electromechanical assemblies and the procurement of all other components required. Furthermore, we will of course support you in the manufacturing of individual components – true to our guiding principle of being able to offer everything as a sole supplier. As a typical example, we can provide input devices that, along with keyboard elements, include a display, housing, analysis electronics and complete connection systems with cable assembly. We rely on cost-efficient manufacturing at selected production sites in Asia. All these production facilities are certified in accordance with ISO9001, ISO14001, TS16949 and ISO13845. The European quality standards of our products are guaranteed by a comprehensive QA system at these plants and in-house.

All the products for "standard springs"

Pogo Pins

Website See all products
SÜTHER & SCHÖN GMBH

Germany

Süther & Schön GmbH's core business comprises: The sale and distribution of rope-end fittings for conveyors, especially for elevators, and all types of fastening guide rails, all grades of cast products, steel clamping plates, particularly for mechanical engineering and railway vehicles. Our range includes: Rope-end fittings for conveyors, elevators, fastening guide rails, wedge sockets for open line construction, fastenings for alternative suspensions, washers for spring buffers, and much more.

All the products for "standard springs"

Damping materials

Website See all products
RINGFEDER POWER TRANSMISSION GMBH

Germany

RINGFEDER POWER TRANSMISSION is the global market leader in the niche markets of drive technology and is well regarded for its customer-specific, application-oriented solutions that ensure excellent and failure-free operation for its clients. We offer locking devices, couplings, bearing housings and damping technology for OEMs but also for the final customer under our strong brand names RINGFEDER, TSCHAN, HENFEL and GERWAH. We not only provide competent advice to our customers on the basis of our 90 years of experience but also develop innovative ideas in cooperation with them. This is part of our aspiration to be the Partner for Performance.

All the products for "standard springs"

Standard Friction Springs

See all products

EM-TECHNIK GMBH

Germany

The emtechnik group – considered with its 160 employees as one of the leading manufacturers worldwide of high-quality miniature fittings and connectors made of special plastics – pursues the goal of consistently developing products from the perspective of its customers. The company was founded in 1965 in Ludwigshafen, Germany, and is successfully directed today in the second generation from the Maxdorf location by Michael Meier. Under his management the company has consistently moved forward with the development of precision fittings and high-performance connectors while establishing itself international internationally. In line with this we have strengthened our investment in foreign markets. With subsidiaries and commercial agencies in Europe, Asia and the USA, we consult with and support our customer directly on site. To guarantee the high standards of quality and safety, we produce about 3 million items a year exclusively in Maxdorf. emtechnik will also retain this German production site in the future.

All the products for "standard springs"

Ball Valve with Pneumatic Actuator 6D

Check Valve 5R

See all products
P.J. PRAUSE DUROTEC GMBH

Germany

In 1974, Paul Joachim Prause founded the company Schichtstofftechnik Prause, which was renamed the P. J. Prause Durotec GmbH in 1998. P. J. Prause had previously, as part of 3M Germany, significantly contributed to shaping the technical application of synthetic leaf springs in Germany with Scotchply™ glass-fibre composites. This enabled Prause Durotec GmbH to acquire more than 35 years of experience in the manufacture and application of leaf springs made from fibre composites. Prause Durotec is a medium-sized company with 16 members of staff and a global customer base. The range of products we manufacture includes all configurations of flat leaf springs with E-glass, S-glass, carbon fibres, with epoxy resin providing the matrix. The procedures used to process the UD prepregs (UD = unidirectional) comply with aeronautical and military standards.

Website See all products

Product recommendations

Germany

Germany

Germany

Germany

See more products

HFP BANDSTAHL GMBH & CO KG

Germany

In our company, HFP Bandstahl in Bad Salzungen, we now look back on more than 100 years of experience in cold rolling and almost 150 years in the metal business. With over 250 employees, it is also our largest location. Cold-rolled steel strips in accordance with EN 10139/10140 in market standard grades, rolled to any strength class, with thicknesses between 0.20 and 2.50 mm and widths between 4 and 525 mm. Cold-rolled case-hardening steel, heat-treated steel and spring steel in accordance with EN 10132 T1-4/10140 in market standard grades, strength classes G or G + K, with thicknesses between 0.20 and 1.80 mm and widths between 10 and 370 mm. Surface finish: Normal bright annealed, custom roughened or polished as well as crack-free and non-porous, level-wound coils, stretched ultra-flat and/or degreased.

All the products for "standard springs"

Spring steel

Website See all products
EZM EDELSTAHLZIEHEREI MARK GMBH

Germany

The EZM Edelstahlzieherei Mark manufactures drawn, sanded and polished bright steel using the cold deformation process and standard profiles and custom profiles according to customer drawings in almost all steel materials. Our high quality products usually end up being used in system and mechanical engineering, the automotive industry and in medical and energy technology. Drum dyeing machines and spring production machines from the brand Proll & Lohmann as well as heat and chemical surface treatment from the brand BAK are manufactured at EZM Edelstahlzieherei Mark's Werdohl plant. Among other things, the EZM metal working and service GmbH makes spindle bearings, straightening machines for round and profile materials with powered straightening rolls as well as custom orders. The innovative combination of heat, blasting, straightening, milling and planing processes at the EZM profile machining plant in Rohr/Thüringen represent a cost-effective alternative able to compete with traditional manufacturing technologies.

Website See all products
AGRO NONWOVEN GMBH

Germany

Welcome to AGRO Nonwoven, your trustworthy supplier for high-quality spunbond from Germany. As part of the globally successful AGRO Group, which today unites various activities relating to the production of spring cores, we draw on a valuable wealth of experience, especially in the area of the furniture industry. We offer you tailored solutions for your requirements in the areas of furniture, medicine, the building trade, packaging and more. Our extensive experience and our commitment to quality make us one of the leading providers in the spunbond industry. As a company in Germany, we satisfy the highest quality standards and environmental requirements, in order to offer you spunbond products of outstanding quality. At AGRO Nonwoven, we place great value on sustainability. We count on innovative production processes and renewable energies to minimise our ecological footprint. Our spunbond products are environmentally friendly and satisfy the strictest sustainability standards. We offer a wide selection of grammages, assemblies and properties, to ensure that you receive the perfect product for your application. We are by your side with our technological expertise and our committed customer service. Rely on AGRO Nonwoven as your reliable partner for high-quality spunbond.

Website
RISSE + WILKE KALTBAND GMBH & CO. KG

Germany

Our third-generation, family-run business can look back on a success story that stretches back over 100 years. We have added to our expertise in cold rolling, which we have been building up since 1920, with the manufacture of tempered steel strips. We see ourselves as a specialist supplier of high-quality cold-rolled strips and steel strips. In addition to conventional cold-rolled strip finishes, our product range includes "Made in Germany" high-strength micro-alloyed fine-grained steels, quenched and tempered steels and spring steel strips. Our absolutely unique selling point is that, in the area of tempered steel strips with a lead-free design, we can offer a wide variety of finishes and surfaces in a range of thicknesses up to 5.50 mm. Get in touch! As a medium-sized company, we see ourselves as a partner that is continuously making improvements and is a customer-focused business on the market. Our main focus is in developing relationships based on a partnership with companies that process cold-rolled strips. In addition to our high degree of reliability, we also impress customers with our additional services, such as a high level of service, expert technical consultation for customers and scheduling flexibility. Within this, a zero-defect strategy is an integral part of our certified quality management system according to DIN EN ISO 9001 and IATF 16949. Furthermore, we are certified to ISO 14001, 45001 and 50001 standards and verified according to ISO 14064-1.

Website
ANKURO INT. EXPORT-IMPORT GMBH

Germany

For more than 25 years, ANKURO has been supplying semi-finished products and services for high-performance materials or so-called refractory metals. We supply and process titanium and titanium alloys, tantalum, molybdenum, TZM, zirconium, zirconium alloys, tungsten and nickel, cobalt and their alloys. However, we can also help you with other non-ferrous metals such as copper, brass or aluminium. We offer the following delivery forms: Semi-finished products including plates, sheets, foils, rods, wires and tubes. Turned and milled parts, precision components, edge and bent parts, laser or waterjet cut parts, wire-cut parts, standard DIN fasteners, custom fasteners, micro screws and titanium castings. We offer brushed, ground, polished, electropolished, PVD coated and anodised (coloured) surface finishes. For the hydrogen industry in particular, we are happy to supply you with high-quality materials such as titanium or nickel foils, for the manufacture of products including Bipolar plates or spring elements in the form of titanium expanded metal. We are also strongly positioned for customer-specific manufacturing of titanium felt sheets. We supply titanium felt in thicknesses from 0.1–5.0 mm and panel formats up to L1500xW500[mm]. The porosity of titanium felt can range from 50–90%. The fibre thickness used can be 20 µm or 50 µm. We are happy to support you in your product development. We work with SolidWorks, Inventor and AutoCad.

Website
TAS SCHÄFER GMBH

Germany

TAS Schäfer GmbH develops innovative new products for drive technology and damping technology (friction springs and industrial buffers). State-of-the-art production facilities fitted with the latest CNC technology guarantee high-quality products. Our production operations are based exclusively in Germany and guarantee a standard of quality that is internationally recognised; "Made in Germany". Our customer-focused, flexible and efficient team implements customer requests quickly and professionally. We are an extremely flexible company and leaders in the hydraulic shrink discs market. Our team of developers is continually working on innovative improvements for specific practical requirements and customer requests.

See all products
KREITZBERG NORMALIEN GMBH

Germany

Since 2011, Kreitzberg Normalien is your reliable, worldwide partner for standard parts in the field of stamping and forming technology. We have more than 25, 000 standard parts available for you from stock, which are identical in construction to many well-known manufacturers. Efficient parts list management is part of our core business and helps you to optimise your purchasing. We are the German representative for Metrol gas springs. In addition to the favourable price, our gas pressure springs are impressive due to their high quality – for which you receive a two-year warranty. We can produce special elements within two days if required. We look forward to hearing from you.
TIEIG INDUSTRIAL PRODUCTS GMBH

Germany

The Tie Industrial Group are international company which was established in Turkey within over 20 years of experience. We are professional in providing tiespring® DIN 2093 disc springs and TWIN WASHERS® DIN 25201 wedge locking washers with competent engineer stuffs. Also we have industrial adhesives known as tiechem®. It has three different products G500, G518 and G550 in its range. - All sizes are ready in stock, - Materials are 50CrV4 for DIN 2093 tiespring; steel and stainless steel for DIN 25201 Twin Washers, - tiechem products are Methyl Methacrylate (MMA) based high performance structural adhesives, - Highest standards of quality control, - Always ready to provide technical assistance. Our web site can help you: http: //tieindustrialgroup.com

MISUMI EUROPA GMBH

Germany

For more than ten years, MISUMI Europa GmbH has supplied mechanical components for automation technology and special machine engineering. At present, MISUMI supplies over 150, 000 customers worldwide. Our products include: Bushings, belt conveyors, couplings, ball bearings, ball screws, springs for technical uses, aluminium profiles, standard components for machine and apparatus engineering, linear bearings, housed bearings, linear units, drill bushings, nozzles, linear guides and positioning tables.
MANGIONE CONSULTING UG

Germany

MANGIONE CONSULTING UG Company has been certified to the ISO International Quality Standard ISO EN 9001: 2015 and works in the field of designing and manufacturing compressor equipment and parts that are used in petroleumrefining, gas and chemical industry. We develop and supply compressor parts from A to Z: non - return valves, suction and pressure valves, membranes, piston rings, springs, etc. Thanks to our own development office where we have high class specialists, we can make individual calculations for nods and compressor group parts needed. Our specialists will evaluate and choose optimal valves for your manufacture. MANGIONE CONSULTING UG is authorized valve manufacturer according to API (American Petroleum Institute, specification 6D) regulations. All our materials meet respective requirements of DIN, ANSI or API. MANGIONE CONSULTING UG provides fast solutions for the problems at hand thanks to our own design-engineering department and our high class specialists. Our service is always at your disposal. We are ready to offer you an individual solution for your problem that meets all your requirements and your equipment’s specifications. We offer service offers at our customer’s facilities should it be needed. It is high level of reliability and competence that distinguishes MANGIONE CONSULTING UG from other companies. A brand of Mangione Consulting is Industrytrade Germany, for international trade of indusrtie goods. www.mangione-consulting.com
TIANJIN FOUNDER METAL CO., LTD

Germany

Founder Stainless Co., Ltd. professional commitment to stainless steel rigging and marine hardware accessories, stainless steel tube valve design, development, production and sales, the company set up a few years, with strong technical force, high-quality product quality, perfect quality assurance system won the domestic The trust of foreign customers, the products are exported around the world.The products include various kinds of casting and forging, and so on more than a thousand kinds of products, including shackle, clip, flange, pulley, ring and rotating ring, ring screw, ring nut, spring hook, eye hook, swivel hook, ring, D ring, fast connecting ring, U type wire, bollard, door buckle, eyelet bolt, butterfly nuts and other stainless steel products have occupied the domestic and foreign industry fixed market rigging. The company can also be based on customer requirements to design, produce other types of stainless steel products. The company has a number of professional precision casting production lines, CNC machining centers, processing center. Also has advanced optical quality analysis equipment to ensure that the material. High pressure test and leakage testing equipment, air tightness testing equipment, angle testing Taiwan, the national standard dental regulations, the Central regulation and light regulation, solid melting furnace, and other advanced equipment, first-class technical capacity.
DRAHTWERKE WAGENER GMBH & CO KG

Germany

Produces spring wires and steel wires in all common diameters, surfaces and formats. Production in accordance with current national and international standards and customised specifications.

Find quotes for

Filters

Results for

Standard springs - Germany

Number of results

24 Companies