Results for

Surface treatment systems - Germany

231 Companies

46 Products

Product recommendations

Netherlands

Atmospheric Plasmasystem | PlasmaBeam DUO PC

Germany

Atmospheric Plasmasystem | PlasmaAPC 500

Germany

Atmospheric Plasmasystem | PlasmaAPC 500 DUO

Germany

See more products

TIGRES GMBH

Germany

Tigres GmbH has been a leading manufacturer of atmospheric pressure plasma systems since 1993. Our system solutions for the activation, fine cleaning and coating of surfaces have been integrated into a diverse range of industry sectors worldwide. Many of the materials used in the automotive, aerospace, electrical, medical, printing, textile, packaging and domestic appliance industries are modified with our equipment before they undergo further processing. Our team consists of highly qualified employees with extensive practical experience, who possess comprehensive expert knowledge in a range of business areas. Every employee has thorough industry expertise in their area of specialisation, which the entire team can draw on as required.

Website
VENJAKOB MASCHINENBAU GMBH & CO KG

Germany

The Venjakob group of companies plan, produce and install complete system solutions – from pretreatment followed by the painting process, conveyor and handling equipment through to drying and exhaust air filtering. Complete system solutions for surface engineering – coating systems for all sectors/materials: Cleaning / Pretreatment / Varnishing / Drying / Handling technology / Exhaust air purification. In order to achieve our goal of providing the highest levels of quality and customer satisfaction, we draw on the sound expertise of our employees and only use top quality purchased parts. Experienced specialist personnel develop and implement individual solutions for our customers, who hail from a wide variety of different sectors, in a timely manner. The quality work of Venjakob is reflected in comprehensive consultations, underpinned by a series of tests in our own technical centre and rounded off by assembly and commissioning carried out acording to schedule.

Website See all products
AURION ANLAGENTECHNIK GMBH

Germany

AURION Anlagentechnik GmbH – plasma technology = plasma systems + high frequency components. AURION Anlagentechnik GmbH was founded by three entrepreneurs towards the end of 1996. The idea which led to this was to produce efficient, low-cost and environmentally friendly components and complete systems for surface treatment. AURION develops and constructs components which supply power to plasma systems. This includes impedance adaptation networks with automatic tuning as well as filters, switches, phase shifters, power splitters, lines and connectors. The main focus is in the field of high-frequency plasma processes at 13.56–27.12 MHz. Building on our expertise in component manufacturing, AURION also offers complete systems for plasma-enhanced surface treatment. This includes surface cleaning and modification as well as coating and etching processes (PVD, PECVD, RIE, microwave).

Website
MKV METALL- UND KUNSTSTOFFVERARBEITUNG GMBH

Germany

As a manufacturer of custom-produced plating and industrial plants, we have focused on individual planning and manufacturing tailored to customer and process specifications since the company was founded. Our work is shaped by our experience and extensive, detailed knowledge gained from decades of building systems for a wide variety of industries. After gradually expanding production, and following an extensive planning process, we built a new company facility at our headquarters in the Franconian town of Allersberg in the spring of 2016. We combined manufacturing areas previously housed in different buildings into one production facility almost 5, 000 sq.m in size. This allows us to optimize internal processes and shorten coordination channels. Today, our team is made up of around 70 qualified and ambitious specialists, supporting and serving our customers around the world. The broad scope of our production expertise gives us the best possible flexibility – from planning department drafts to on-site installation.

See all products
FISCHER GMBH & CO. SURFACE TECHNOLOGIES KG

Germany

The company FISCHER GMBH & CO. SURFACE TECHNOLOGIES KG, is a Manufacturer/ Producer, which operates in the Electroplating - machines industry. It also operates in the Injection moulding of rubber and plastic, galvanising systems, Injection moulding of rubber and plastic, surface treatment systems, and tool manufacturing industries. It is based in Katzenelnbogen, Germany.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

JOKE TECHNOLOGY GMBH

Germany

The company JOKE TECHNOLOGY GMBH, is a Manufacturer/ Producer, which operates in the Finishing of surfaces - machinery industry. It also operates in the surface treatment systems industries. It is based in Bergisch Gladbach, Germany.
GEBRAUCHTE STRAHLANLAGEN

Germany

The company GEBRAUCHTE STRAHLANLAGEN, is a Distributor, which operates in the Sand blasting - steels and metals industry. It also operates in the surface treatment systems industries. It is based in Pliezhausen, Germany.
DIENER ELECTRONIC GMBH & CO. KG

Germany

With 30 years of experience, Diener electronic‘s Plasma Surface Technology competence team as well as our cooperation partners in automation and implementation will show you individual ways to set up your planned production plant in a future-proof manner. As a global market leader, we have already sold more than 11, 000 systems worldwide. We offer the tailor-made solution for efficient processes in the fields of low- and atmospheric-pressure plasma systems as well as for parylene and vacuum systems. Let yourself be inspired by the possibilities we offer with our technologies and our unrivalled processes. We are looking forward to hearing from you! Comprehensive competence from one source Our customers benefit from the experience and know-how of dedicated employees as well as from state-of-the-art production equipment. Achieving success with advanced solutions At several locations in Baden-Württemberg, we develop and produce innovative solutions for economic, precise and environmentally friendly plasma treatment of surfaces – and we do this with enormous success. Since the company was founded, we have grown continuously and are now one of the leading manufacturers of plasma systems worldwide. Applications of our systems: Ultra-fine cleaning Surface activation, coating, etching Hydrophilic/hydrophobic coating Degassing / outgassing Height simulation Sensor calibration Leak test

All the products for "surface treatment systems"

Plasma-Surface-Treatment-System | Nano

Plasma-Surface-Treatment-System | Atto

Atmospheric Plasmasystem | PlasmaAPC 500 DUO

Plasma-Surface-Treatment-System | Pico

Atmospheric Plasmasystem | PlasmaBeam RT

Website See all products
QUELLTECH GMBH

Germany

QuellTech turnkey solutions for industrial image processing In addition to the laser sensor technology, our complete solutions include application software that can be implemented remotely worldwide. Why QuellTech laser sensors? Due to our flexible production methods and our focus on laser triangulation, we can adapt our sensors at any time. This includes, for example: Limited installation space, high process speeds, high temperatures of the measurement objects (up to approx. 1200°C), optically demanding surfaces and harsh industrial environments. Inline quality monitoring in production, machines and systems with laser sensor technology for surface inspection, volume measurement, preventive maintenance, flatness measurements, thickness measurements, weld seam guidance, weld seam inspection, industrial image processing and 3D laser scanner measurements. Quelltech offers inline solutions for quality inspection in the following industries Metal Fabrication, Smartphone Manufacturing, Welding Automation, OEM Integration, Power Engineering, Mining, Automotive. Do you need an initial consultation for your measurement task and preferably an initial free estimate of the feasibility of your measurement task? Then please get in touch with us at office@quelltech.de We will call you back promptly or arrange a team meeting with you for a competent initial technical evaluation of your measurement task.

All the products for "surface treatment systems"

Q6 Laser Scanner Case Study

Q5-Laser Scanner

Website See all products
OVE PLASMATEC GMBH

Germany

OVE specialises in the activation of plastic parts and the coating and treatment of surfaces of elastomers, moulded parts and O-rings used in industry. Our specialist knowledge of how to reduce friction and wear on elastic components aims to achieve functional, economic and environmentally friendly optimisation of seals which are subjected to dynamic stress in accordance with our customers' individual specifications. Modern plasma technology allows us to adjust the tribological properties of a wide range of elastomers in terms of all customer-specific variables using sophisticated, custom-controlled computer technology.

Website

BOUS RENZMANN CLEANTECH GMBH

Germany

BOUS RENZMANN Cleantech GmbH is a specialist in the production of water-based cleaning and degreasing systems. In recent decades, the company has always focussed on the constant development and optimisation of all associated components. Our systems are used in a wide range of sectors to clean and degrease components and parts made from materials such as metal, plastic, glass, ceramic or combinations of these. In addition to an extensive standard programme, we also offer a wide range of custom-made products according to customer requirements. At our in-house technical centre, washing tests are implemented under realistic conditions to determine the scope of the cleaning task or the feasibility of the cleaning requirements. By doing this, BOUS allows production companies worldwide to ensure optimum cleaning of their products for the purposes of delivery or further processing. BOUS has its own customer service which, in addition to providing installation, commissioning and instruction services, can be contacted in the event of malfunctions or for regular annual maintenance. Furthermore, we provide training in the correct care and maintenance of the systems and accompany our customers in conducting initial washing tests and determining the ideal washing parameters on site – if necessary in cooperation with our long-standing chemicals partner.

Website
WOMA GMBH

Germany

WOMA GmbH | Kärcher Group. WATER POWER AS A TOOL. WOMA is a leading supplier of high-pressure plunger pumps, ultra-high-pressure equipment, high-pressure systems and water tools. Innovation and qualtity have been our hallmarks for over 60 years. Thanks to our ongoing research and development, we can now produce systems with a water pressure of up to 4000 bar. We develop state-of-the-art, reliable high- and ultra-high-pressure solutions for industrial cleaning and process applications, for customers all over the world. We maintain a constant dialogue with users and partners in order to successfully satisfy our customers' needs and desires. The knowledge we gain from this is constantly incorporated into the development of new products and solutions. The company employs around 200 staff in Duisburg. WOMA GmbH has been part of the Kärcher Group since 2011, and serves customers around the world via a well-connected international dealer and service network.

Website See all products

Product recommendations

Atmospheric Plasmasystem | PlasmaBeam RT

Germany

Atmospheric Plasmasystem | PlasmaBeam PC

Germany

Atmospheric Plasmasystem | PlasmaBeam Mini

Germany

Atmospheric Plasmasystem | PlasmaBeam DUO

Germany

See more products

LUDWIG SCHLEICHER ANLAGENBAU GMBH & CO. KG

Germany

We have developed and produced machines and systems, and process engineering in connection with automation and robotics, including the entire electrical engineering planning – hardware and software, for more than 30 years. Modular concepts for manufacturing and processing products made of carbon, plastic, composite materials, recycled materials, aluminium and steel, primarily for high-quality interior and exterior parts in the automotive and aviation industries. As a medium-sized company, we have consolidated our expertise into a solid structure through Ludwig Schleicher Anlagenbau GmbH & Co. KG, and Ludwig Schleicher Ingenium GmbH & Co.KG. Our customers worldwide receive the best possible assistance through innovative process engineering advice, reliable completion of tasks, as well as support and service offers throughout the entire product life-cycle, according to the premise: "Everything from a single source – one partner".

Website
ARCOTEC GMBH

Germany

With almost 50 years’ experience, Arcotec GmbH enjoys success as the sole manufacturer of all three methods of physical pretreatment under atmospheric pressure (corona, plasma, flame). 2019 - With over 45 years’ experience, Arcotec GmbH continues to enjoy success as the sole manufacturer all three methods of physical pretreatment under atmospheric pressure (corona, plasma, flame). Over 15, 000 Arcotec pretreatment systems in use worldwide are a testimony to our consistently high quality and unique know-how in the field of surface pretreatment. 1997 - Introduction of the atmospheric plasma machine (Arcospot®), which distributes high-energy spark discharges. The introduction of the atmospheric plasma machines in particular opened up the market for materials that are difficult to treat at high feed rates. 1991 - Another physical treatment principle, “flame treatment”, was introduced. 1985 - Arcotec GmbH was founded. Pretreatment systems 1976 - Development and deployment of the world’s first plasma machine with open jet electrodes (Arcojet®) for treating plastic moulded parts; this works with electric plasma. Pretreatment systems 1975 - Production of the pretreatment machines begins using high-frequency corona. Pretreatment systems 1974 - Fritz Bloss founded an independent commercial agency.

Website
ELT ENTSTAUBUNGS- UND LUFTTECHNIK GMBH

Germany

Our aim is not only to identify each individual technical task but also to work towards comprehensive solutions while keeping cost-effectiveness, amortisation, safety and environmental sustainability in focus. The benefit for you is our speed. ELT was founded in 1996 by two engineers whose experience is based on 30 years of working in the ventilation and dust removal technology sector. Thanks to our flexibility and technical expertise, we have been able to construct installations in a variety of sizes both in Germany and abroad. Our strength lies in the cohesion of our company with close collaboration between customer consultation, detailed planning, preparation and professional installation.

Website
RIPPERT ANLAGENTECHNIK GMBH & CO. KG

Germany

Versatile systems engineering – environmentally friendly and safe. With its three business areas (paint finishing systems, filter units and industrial fans), Rippert Anlagentechnik GmbH und Co. KG. competes successfully on the market. For more than 45 years, the systems supplier has developed, produced and installed state-of-the-art, energy-saving systems for industrial customers around the world. The headquarters of the company, which is managed by Thomas Rippert, is located in Herzebrock-Clarholz in eastern Westphalia. Approximately 530 highly qualified employees manufacture bespoke high-tech products in this factory and in five other locations in Germany, Austria and the Netherlands.

See all products
BRÜNNET SYSTEMS GMBH

Germany

The company BRÜNNET SYSTEMS GMBH, is a Manufacturer/ Producer, which operates in the Surface treatment - machinery and equipment industry. It also operates in the Goods handling systems, continuous, systems and machinery for metal surface treatments and finishes, and Goods handling systems, continuous industries. It is based in Überherrn, Germany.
MTO GMBH

Germany

The company MTO GMBH, is a Service Provider, which operates in the Surface treatment - machinery and equipment industry. It also operates in the metal deburring, and systems and machinery for metal surface treatments and finishes industries. It is based in Gummersbach, Germany.
TERMWAY GMBH

Germany

The company TERMWAY GMBH, is a Manufacturer/ Producer, which operates in the Electronics - import-export industry. It also operates in the systems and machinery for metal surface treatments and finishes industries. It is based in Eiterfeld, Germany.
MATTHIAS WETZEL INDUSTRIEBESCHRIFTUNGEN GMBH

Germany

When the optics company, Carl Zeiss, discussed outsourcing the “signage” activity, I, Matthias Wetzel, seized the opportunity and founded Matthias Wetzel INDUSTRIEBESCHRIFTUNGEN GmbH in 1999 in the form of a management buy-out. This enabled me to realise my vision of an efficient signage centre. What began with four employees has now grown to become a team of almost 40 staff. To ensure that we continue to work with specialist professionals in the future, we have provided in-house training since 2004. With the marking and varnishing of high-quality industrial products in the fields of appliance engineering, optical precision appliance engineering, systems and mechanical engineering and electronics and precision tools, our company has developed into an acknowledged surface treatment centre.

Website

CHEMEGRA CHEMISCHE UND MECHANISCHE GRANULATVERARBEITUNG GMBH & CO. KG

Germany

CHEMEGRA is your expert partner for the mechanical processing of various slag for sand blasting (slag abrasives) and of other granules for different applications. In particular, CHEMEGRA produces quartz-free single-use abrasives in your requested grit size and in your preferred packaging. For example, these abrasives are suitable for providing corrosion protection in bridge repairs, bodywork surface treatment, concrete repairs, facade restorations, etc. Abrasives, manufacture of various grit sizes, polished gravel and reusable abrasives, building materials for enhancing ground properties and backfill materials. We can also custom pack our customers' bulk or powdered material as part of our contract filling/refilling service in the space of just a few days. We are also willing to fill big bags (large, flexible bags), including at the customer's premises (mobile system).

Website
EZM EDELSTAHLZIEHEREI MARK GMBH

Germany

The EZM Edelstahlzieherei Mark manufactures drawn, sanded and polished bright steel using the cold deformation process and standard profiles and custom profiles according to customer drawings in almost all steel materials. Our high quality products usually end up being used in system and mechanical engineering, the automotive industry and in medical and energy technology. Drum dyeing machines and spring production machines from the brand Proll & Lohmann as well as heat and chemical surface treatment from the brand BAK are manufactured at EZM Edelstahlzieherei Mark's Werdohl plant. Among other things, the EZM metal working and service GmbH makes spindle bearings, straightening machines for round and profile materials with powered straightening rolls as well as custom orders. The innovative combination of heat, blasting, straightening, milling and planing processes at the EZM profile machining plant in Rohr/Thüringen represent a cost-effective alternative able to compete with traditional manufacturing technologies.

Website See all products
BTS BEFESTIGUNGSELEMENTE-TECHNIK GMBH

Germany

BTS Befestigungselemente-Technik GmbH is a medium-sized company in the metalworking industry, focused on the manufacture and sale of fastening and connecting materials. The company was founded in 1983. It is located in Saarburg, in the German state of Rhineland-Palatinate, and employs around 50 members of staff. The product range comprises wing nuts, wing screws, cap nuts, timber connectors, beam clamps, channel nuts, sliding blocks, hammer-head bolts and various specialist parts made to drawings or samples. It is supplemented and expanded continuously. Our company is characterised by a high added-value chain, from metal casting "Made in Germany" to mechanical processing, customer-specific surface treatment and individual packaging. We act based on our customers' requirements, in a flexible and quality-conscious manner and through certified management systems.

Website
WHITE LION GMBH

Germany

White Lion is your contact for high quality dry ice blasting systems and solutions in the surface treatment sector. Our clientele includes global leaders in the automotive industry, international industrial service providers, power stations, chemical companies and airlines, among many others. We address your needs and devise custom solutions for automated and manual cleaning with dry ice. You are always able to individually configure and customise your dry ice machines thanks to our wide range of accessories. Our dry ice systems are available around the world within 24 hours using air freight delivery. As a system supplier in this sector, we stand out thanks to our made in Germany quality, allowing you to benefit from over 25 years of experience in dry ice technology and its application. White Lion's dry ice blasting equipment and product range stand out in every respect. White Lion – the dry ice innovators

Website
HASPA GMBH

Germany

haspa GmbH is one of the few manufacturers which provides a complete product range for flexible shafts which is compatible with all currently existing systems. Special custom solutions and individual production processes keep us on our toes and present us with new challenges which we love to find solutions for. For over four decades, we have been active in this field which has expanded ever more as time went on. As a result, we now have three departments: Department I: OFT = Surface technology: Includes: Tool drives, flexible shafts and other surface treatment products (such as drive units for flexible shafts, pneumatic drives, micromotors, collets, abrasives, milling cutters, etc.). Department II: VST = Adjustment elements: Remote control and power transmission elements; adjustment and regulation. Department III: Special coils and tubes. One reason for our success is the way we take note of our customers' individual requirements.

Website See all products
BAIER DREHTEILE GMBH & CO. KG

Germany

CNC turned parts and automatic turned parts made from all machinable materials in accordance with DIN, a drawing or template. Our product range includes everything from simple turned parts to highly complex, ready-to-install components. The parts are used in the automotive, hardware/safety technology, fastening technology and valve sectors as well as the electronics industry. Our machinery creates the optimum preconditions for our customers' wide range of parts. CNC long and short lathes (capacity: 2-65 (175) mm); CNC high-performance milling lathes (capacity: 15-65 mm); Multi-spindle lathes (capacity: 5-35 mm); Single-spindle lathes (capacity: Up to 15/20/26/36/42/65 mm); Our range of services also includes system logistics and finishing of assemblies, e.g. grinding, vibratory grinding, labelling, milling, punching, curing and surface treatments.

Website
CRYOSNOW GMBH

Germany

We are a manufacturer of equipment and systems for snow blasting and dry ice blasting. Our applications are manual and automated pre-treatment, cleaning, cooling and deburring using CO2 snow blasting. The innovation here is the use of liquid CO2 and compressed air. We hold national and international industrial property rights in this area. We supply high-quality CO2 blasting equipment and a wide range of accessories to customers around the world. During CO2 snow blasting, dry ice particles (solid CO2 at -78 °C) are generated from liquid CO2 in the device, and then run with compressed air via a nozzle to the surface to be cleaned. Advantages include a dry and residue-free process without water and chemicals. The CryoSnow team has decades of experience in the field of industrial cleaning and dry ice technology. Our devices and systems are "Made in Germany" and are manufactured in accordance with the applicable laws and standards according to ISO 9000. With modern design and development tools as well as innovative manufacturing processes, we convert process ideas into production-ready products within a very short time. We support customers across the world from our company headquarters in Berlin. In addition, through our sales and service partners, we have competent contact persons at your site.

Website See all products
CAST-SOLUT GMBH

Germany

CAST SOLUT GmbH was founded in 2007 and distributes its products all over the world. We offer a comprehensive rapid tooling and prototyping service, from developing the concept to the first prototypes and then the final component design ready for series production. Our range of services spans both 3D printing processes such as SLA, SLS, metal printing, etc. and conventional manufacturing processes such as vacuum casting, RIM, injection moulding and dies, investment casting, CNC components, pressure die casting and surface treatments. Our technology solution service ranges from consulting for manufacturing concepts to distribution and training. Our KLM Maschinenbau brand has made a name for itself on the global market thanks to its innovation, quality and service – this combination enables us to offer a wide range of machinery and custom solutions. Our core business activities are focussed on vacuum chambers, casting/metering equipment and curing and hardening systems. We also offer third-party 3D printing systems.

Website
WALTHER TROWAL GMBH&CO.KG

Germany

Since 1931 Walther Trowal has been developing and producing systems for the refinement of surfaces. Initially focusing exclusively on mass finishing – the term “Trowalizing” originated from the company’s cable address “Trommel Walther” – Walther Trowal has continuously expanded its product portfolio. Over time the company has developed a broad range of machinery and systems for mass finishing, shot blasting and coating of mass produced small components. With the invention of new systems like, for example, drag finishing and the development of special finishing methods for 3D printed components, the company has proven its innovative capabilities again and again. Trowal develops and implements complete surface treatment solutions that can be seamlessly integrated into linked production systems existing at the customers. This includes the entire process technology, perfectly adapted to the specific surface finishing requirements of the work pieces: Equipment and the respective consumables always complement each other in a perfect manner. Each individual work piece and each manufacturing process must meet special technical requirements. That is why the experienced process engineers in our test lab, in close cooperation with the customers, develop the optimal process technology for the finishing task at hand. The result: Work piece surfaces that meet exactly the required specification with short processing times and a high degree of consistent, repeatable results.

All the products for "surface treatment systems"

Centrifugal barrel finishing machine - E5

Small part coating - ROTAMAT

See all products
OLIGO LICHTTECHNIK GMBH SURFACE CONTROLS

Germany

OLIGO surface controls has been offering individual and optical solutions for paint and surface control in the automotive, steel, furniture, plastics, ceramics and paper industries as well as in all branches of industry for surface coating and surface treatment worldwide for more than 20 years. We design and develop lighting systems according to the needs of our customers. Surface control. State-of-the-art light technologies make even minimal surface defects or tiny irregularities visible. Producers can quickly take corrective action, reduce expensive waste and ensure high, consistent quality. Colour sampling. Complex formulations, surface finishes, even different raw materials and materials of the substrate carriers can unintentionally lead to colour deviations in the manufacture of industrial products. Our ColorMatching system makes colour deviations visible and process corrections can be initiated promptly and effectively.

See all products