Results for

Manufacturer Producer - Ultrasound

177 Companies

64 Products

Product recommendations

Belgium

Belgium

Belgium

Belgium

See more products

INDTACT GMBH

Germany

iNDTact is a pioneer in industrial digitalisation and the Internet of Things, offering solutions for Condition Monitoring and Structural Health Monitoring. With over a decade of experience, iNDTact offers its customers scalable, flexible and easy-to-use sensors based on a modular principle, alongside software and services. Our vision is to ensure sustainability, efficiency and safety of processes and structures worldwide. To do so, we use our own patented acoustic emissions and vibration sensor technology, developed and manufactured at our site in Würzburg. The globally unique sensor technology, which combines high bandwidth, high sensitivity, extremely good SNR and above-average robustness, and iNDTact’s exceptional application expertise lets machines, systems and structures "feel", and provides helpful monitoring data to customers to allow them to identify, locate and analyse even the smallest changes themselves. Clients benefit in various ways: iNDTact’s solutions help save costs, resources and time by enabling error detection at an early stage as well as predictive maintenance. iNDTact’s growing team of motivated researchers, hardware, IT and engineering specialists is continuously pushing into new technological areas with the goal of providing best sensor data and monitoring information for all industrial applications

Website
SDT ULTRASOUND SOLUTIONS

Belgium

SDT ULTRASOUND SOLUTIONS: Belgian manufacturer of ultrasound maintenance equipment. We help technicians check the mechanical state of machines, bearing lubrification, hydraulic systems, steam traps and tanks to avoid electrical faults and detect compressed air and gas leaks to reduce energy expenditure and reduce production costs whilst extending the life cycle of your facilities.

All the products for "ultrasound"

SDT270

Ultrasound Sensors and Ultrasonic Transmitters

Steam Trap Testing and Maintenance

ULTRAChecker

SDT340

Website See all products
IMV IMAGING

United Kingdom

Part of the IMV Technologies group, IMV imaging are leaders in veterinary imaging. Previously known as BCF Technology and ECM (Echo Control Medical), we have been committed to helping our customers improve animal care for over 35 years. We are also dedicated to providing the best equipment, advice, learning, customer care and technical support. Established in Scotland (BCF) and France (ECM and IMV) we have additional offices in Ireland, France, North America, India, South Africa, China and The Netherlands. We also work with over 50 distributors across the world. We were the first to develop water resistant, wearable ultrasound scanners for cows that allowed the users to view the image on a head mounted display. Nowadays all of our equipment is designed and manufactured in-house or sourced from the world’s leading healthcare and imaging providers. Our portfolio includes a variety of veterinary products including ultrasound, X-ray, digital image management (PACS), CT and MRI. Contact us and we'll put you in touch with a local representative: hello@imv-imaging.com Facebook: @IMVimagingInternational Twitter: @IMVimaging LinkedIn: www.linkedin.com/company/imv-imaging/ Instagram: @imv.imaging

All the products for "ultrasound"

ExaGo

ImaGo

Duo-Scan:Go

ExaPad and ExaPad mini

Easi-Scan:Go

Website See all products
U&STAR ULTRASONIC TECHNOLOGY CO.,LTD

China

1.Ultrasonic Transducer, also called piezoelectric transducer, convertor; 2.Ultrasonic Generator, also called Ultrasonic driving power, control box; Patterns and types like, Ultrasonic intelligent digital generator and Ultrasonic Analog Generator; 3.Ultrasonic Booster, also called amplitude amplifier pole, amplitude bar, ultrasonic exponential solid horn; 4.Ultrasonic Horn, Sonotrode, mould, tools head; (together with Ultrasonic Transducer and Booster, also called Ultrasound Oscillator, Ultrasonic vibration components)5.Ultrasonic Accessories, like special connection screws, Ultrasonic Sensors, transducer housing, ultrasonic probe, flange, connection cable, ultrasonic probes, cooling jacket, connectors with clip etc; 6.Ultrasonic detection equipments and Lab Testing, Like Ultrasonic Power (sound intensity) Measuring instrument; Ultrasonic Amplitude measuring instrument; Ultrasonic computer impedance analyzer etc; B. Our Ultrasonic Technology Processors (Reactors) Widely applied to fields and areas
ECOMED(HONGKONG)INDUSTRY CO.,LTD

China

EcoMed is a professional leading manufacturer of medical devices based in Shenzhen, China. We have specialized in Ultrasound Scanner, Patient Monitor, X-ray Film Viewer and Infusion Pump for 13 years, with good quality and pretty competitive prices. All the products have passed CE and ISO certificates. It is our pleasure to seek a way cooperating with your esteemed company. Any interest or idea will be much appreciated. Catalogue and price list will be provided for your reference if needed.

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

CHATTANOOGA ACADEMY

United Kingdom

Chattanooga is the world's largest manufacturer of equipment for treating musculoskeletal, neurological and soft tissue disorders. However, we want to add real value to you as a clinician, to help you build your understanding of the technologies we provide, and how to best use them. This your go-to resource for articles, webinars, videos and support on rehabilitation.
ULTRASOUNDTECH

Italy

The company ULTRASOUNDTECH, is a Manufacturer/ Producer, which operates in the Environment - services industry. It also operates in the pesticide, antiparasiticides for animals, and ultrasound industries. It is based in Misinto, Italy.
WEBER ULTRASONICS AG

Germany

Ultrasonic technology for unlimited applications. As one of the leading companies, Weber Ultrasonics develops, produces and markets solutions and components for the industrial use of ultrasonic technology worldwide. The business areas include cleaning, welding and cutting with ultrasound solutions as well as ultrasonic-based plant technology for disintegration. For more than 20 years, Weber Ultrasonics has been synonymous with the entire range of industrial ultrasonic applications. Over 40 patents and numerous product innovations accompany us on the way to the best sound. All across the world, our solutions stand for efficient processes and first-class results. All our products are developed in Germany and manufactured according to German quality standards. Our engineers and consultants are familiar with your industry. This enables us to achieve perfection both in ultrasonic-based joining and cutting processes and in cleaning processes. Proudly Made in Germany.

Website See all products
EUROSONIC ULTRASCHALL GMBH & CO. KG

Germany

EUROSONIC specialises in the manufacture and development of modern ultrasonic components. The medium-sized company successfully combines its many years of expertise in ultrasonic technology with innovative ideas and first-rate, high-quality production technology. The powerful components are sold across Europe and guarantee significant benefits for all customers: Process reliability and cost efficiency. Companies in the packaging and automotive industries can rely on the proven EUROSONICweld system. From juice boxes to bags of cement – the ultrasonic welding technology easily seals a wide range of packaging solutions. As a specialist, we also supply solutions for special applications, which we develop together with our customers. In addition, we produce custom ultrasonic equipment from our various components for manufacturers of ultrasonic processing machines.

Website
SMAAT TECHNIQUES

France

Smaat Techniques is a group of industrial experts with a combined total of over 30 years' experience in the field of measuring and control instruments. We provide you with high-performance products combining quality and efficiency at competitive prices, covering flow, pressure and level measurements. Our devices have demonstrated their excellence in numerous sectors such as the chemical, metalworking and oil industries, as well as in the fields of water and waste water, while maintaining highly competitive prices. The unrivalled reliability of our products results from the outstanding quality of the raw materials used, thorough inspections of our production lines and, most importantly, our proven expertise with regard to flow, pressure and level measuring solutions. We specialise in meeting the specific demands of our customers by providing them with tailor-made products. Opt for excellence, opt for Smaat!

Website

YUTIAN FUTAI INTERNATIONAL TRADE CO., LTD.

China

-WHATSAPP : +8615713352738 -Yutian Futai International Trade Co., Ltd. -http: //husbandry-poutry.en.alibaba.com -Contacting Person: Mr.will -E-mail: futai_vet@126.com Yutain Futai International Trade Co., Ltd. is a manufacturer with self-independent import-export rights, which specialized in pig equipments; sheep / goat equipments; horse equipments; cattle equipments; pet equipments; Poutry equipments and so on. Yutain Futai has established close business relationships with foreign institutions in China and domestic manufacturers, which has taken the lead in obtaining ISO9001: 2000 quality management system certificate among other domestic manufactures. Our company is a member unit of the State Agricultural Ministry's Veterinary Apparatus Sector. Our company has independently researched Farrowing stall/crate/pen, Drinker and feeder system equipements, Temperature control equipments, Ear marking equipments, Medical care equipments, Artificial insemination equipments, Slaughtering equipments, Incubation equipments, Medical care equipments, Farm construction equipments, Fishing yatch and other all animal equipments. Our main product's brand are 'Futai' & 'WELLD', which were both entitled as "Famous Brand Products" of International Agro Exhibition in China in 1999 One time co-operation with my company, business and friendship will be forever.

All the products for "ultrasound"

Animal pregnancy ultrasound scanner

Vet pregnancy ultrasound scanner

handheld veterinary ultrasound scanner for pig/sheep/goat

Veterinary wrist ultrasound scanner for pig/sheep/goat

Pig pregnancy ultrasound scanner with palm

Website See all products
DOLFIN INDUSTRIAL PARTS WASHING MACHINE AND SYSTEMS

Turkey

Dolfin was founded in 1976. After the first production of washing the machine in 1985 stepped into the business, in 2001 preparing the necessary substructure in 5000 m2 production area attracted foreign market and started Industrial Part Washing Machine production. From the first day, it has become a model in part washing machines business (by having ISO 9001 and CE documents) and aimed the high-level quality. 40+ years of machine production experience, standard and special washing machines for spray washing; engine/block washing machines for soaking and ultrasonic washing machine productions; pickling machines; ultrasonic washing machines; screw with fasteners washing machines; auto spare parts washing machines; plane, ship, train, and locomotive parts washing machines, become the leader company in Turkey. Dolfin will continue its modern and innovator manner of the rule today and the future. It is giving confidence by service quality and following modern technology for its clients. Moreover, Dolfin is giving value to its workers and partners also dynamic for the demands. Along with quality a and trust it is exporting more than 20 countries and it will.

Website See all products

Product recommendations

Belgium

Belgium

Ultrasound Sensors and Ultrasonic Transmitters

Belgium

Belgium

See more products

WERNER LANGER GMBH & CO. KG

Germany

Werner Langer, metal & plastic processing: Over 90 employees, more than 50 years of industry experience, recognised as a high-tech company – this is our profile. Certification in accordance with DIN EN ISO 9001: 2000. We have proven ourselves as a supplier to sectors such as model making, foundry products, automotive, construction industry, electrical and the household goods industry. As a manufacturer of high quality plastic components, we can supply both plastic components and complete assemblies.

Website See all products
BOUS RENZMANN CLEANTECH GMBH

Germany

BOUS RENZMANN Cleantech GmbH is a specialist in the production of water-based cleaning and degreasing systems. In recent decades, the company has always focussed on the constant development and optimisation of all associated components. Our systems are used in a wide range of sectors to clean and degrease components and parts made from materials such as metal, plastic, glass, ceramic or combinations of these. In addition to an extensive standard programme, we also offer a wide range of custom-made products according to customer requirements. At our in-house technical centre, washing tests are implemented under realistic conditions to determine the scope of the cleaning task or the feasibility of the cleaning requirements. By doing this, BOUS allows production companies worldwide to ensure optimum cleaning of their products for the purposes of delivery or further processing. BOUS has its own customer service which, in addition to providing installation, commissioning and instruction services, can be contacted in the event of malfunctions or for regular annual maintenance. Furthermore, we provide training in the correct care and maintenance of the systems and accompany our customers in conducting initial washing tests and determining the ideal washing parameters on site – if necessary in cooperation with our long-standing chemicals partner.

Website
HÖNTZSCH GMBH

Germany

Flow measurement technology has been the core of our business since our company was founded in 1966. From 1976 onwards, Höntzsch has worked to develop, manufacture and distribute innovative and groundbreaking products in the flow measurement sector, and has been part of the DMT GmbH & Co. KG group in Essen as of 2012. Höntzsch also offers solutions for special areas of application such as explosive zones in accordance with ATEX, for gases with operating temperatures up to 550 °C, for measurements under regulatory control in accordance with the "TA Luft" air pollution control regulation and sections 13 and 17 of the "BImSchV" (the German Federal Imission Protection Ordinance), for high flow speeds of up to 200 m/s or for flows with changing directions of flow. Our DAkkS-accredited calibration laboratory completes our range. Air flow meters, calibration service for electrical measuring and testing equipment, development of flow meters, intrinsically safe sensors for explosion protection areas, compressed air measurement, intrinsically safe equipment for explosion protection areas and compressed air flow meters

Website
DSL AIR TECHNOLOGY GMBH & CO KG

Germany

A medium-sized company of more than 25 years' standing, we have made our name nationally and internationally in the fields of air filter technology, workplace safety and environmental protection on the basis of an ecological and socially responsible company philosophy. The "door within a door" design of our electrofilter series has become an international benchmark for technically sophisticated and easy-maintenance filter systems. For years, the continuous monitoring of developments in the design and performance of modern machine tools has given rise to more and more new electrofilter series, often in collaboration with the mechanical designers, and with the form adapted to the machine tool design. This also calls for a new design of the filter equipment, primarily the ionizer and collector cells. Today, DSL Air Technology boasts the world's largest electrofilter modification in the sector.

Website
PACO PAUL GMBH & CO. KG METALLGEWEBE UND FILTERFABRIKEN

Germany

The manufacture of wire mesh is based on traditional craftsmanship. Making high-tech products from wire mesh requires state-of-the-art production and finishing equipment too, like that used at PACO. This is created in PACO's in-house Development and Mechanical Engineering departments. This means that PACO quality cannot easily be copied by others with little expertise – with all the advantages for manufacturing in Germany. As a wire mesh specialist, PACO boasts exceptional in-house expertise, particularly in screening technology. Plus they have comprehensive knowledge of and in-depth awareness of specific processes in screening applications for a wide variety of industries, as well as in research, laboratory and development environments. PACO wire meshes for silk-screen printing are some of the world's best in their numerous areas of application.

Website
G.A. RÖDERS GMBH & CO KG

Germany

The company produces aluminium and zinc parts by means of a die-casting process as well as plastic injection moulding. G.A.Röders supplies small series of injection-moulded parts, made in Soltau with surfacing and processing, and large series of parts, made in the Czech Republic, in the following sectors: automotive engineering, aircraft manufacturing, medical technology and electronics. Through our own tool manufacture and project management, we accompany you through the entire product lifecycle, from the initial idea to series production. Zinc or aluminium pressure die-casting. In the plastic injection moulding process, we supply pre-finished parts, in some cases with complex assemblies, in small and large series from Solltau and the Czech Republic.

Website
LAUBSCHER PRÄZISION AG

Switzerland

Since it was first founded in 1846, Laubscher Präzision AG has evolved to become the leading manufacturer of technologically sophisticated precision turned parts, thanks to its successful balancing of tradition and innovation. Ready-to-install precision turned parts with diameters ranging between 0.3 mm and 42 mm, made from a wide range of steels, non-ferrous heavy metals and light metals, as well as special working materials. Heat and surface treatments in our own facilities. Series production runs from 500 to several million pieces. Founded in 1846, it is the oldest company in its sector, and became a public limited company in 1920. 260 employees – 500 production units – Production space approx. 22, 400 m2 – Quality-certified in accordance with ISO 9001 – Environmental certification ISO 14001 – Certified for medical devices in accordance with ISO 13485

Website
HTP EUROPE

Belgium

HTP Europe has since 1954 been specialised in plastic injection, injection blowing, the manufacture of matrices, moulds and tools. With over 60 years experience we have become a leader in this field. Our business is focussed on the injection of technical parts, injection blowing (IBM and ISBM) of bottles made form plastic and composite materials in clean environments. We carry out overmoulding of inserts which can be metal, textile or flexible TPE/TPU/SEBS type materials, and assemblies of plastic parts thanks to welding (ultrasound, mirror and vibration) or by bonding. We transform all types of thermoplastics which can be loaded with glass or carbon fibres. We are active in various fields, such as medical, pharmaceutical, food, aeronautics, electricity and safety. Since quality management is one of the keys to our success, we are proud to be ISO 9001 and EN 9100 certified.

Website

OT OBERFLÄCHENTECHNIK GMBH & CO. KG SCHWERIN

Germany

Processing and coating of machinery and machine parts, in particular manufacturing and regeneration, as well as arranging such work. Our products include: Contracted sand blasting; Vacuum heat treatment; Turbine blades; Contracted water jet cutting; TIG welding; Ultrasonic testing; Eddy current testing; Laser cladding; Removing paint from metal parts; surface coating, oxide ceramic

Website
AUROMAK MAKINA

Turkey

Located in Turkey, Auromak Makine stands as a premier manufacturer of industrial cleaning machines and parts washing solutions. Our meticulously crafted products are tailored to address the diverse requirements of both retail and wholesale markets, with a strong emphasis on aesthetics, superior quality, and practicality. Our machines are designed with versatility in mind, adeptly meeting the stringent demands of various sectors, including automotive, packaging, and the food industry. They excel, particularly in parts washing applications. Basket Type Parts Washers: •Parts Cleaner Machine •Turntable Parts Cleaner Machine •Basket Washing Machine •Pneumatic Turntable Parts Cleaner Machine •Parts Washing Machine with Cabin •Manual Parts Washers and Solvent Manual Brush Washing Sink Turbo Parts Washers: •Manual Pressure Turbo Washing Machine •Pressure Turbo Washer Wet Blasting Machines: •Aqueous Sandblasting Machine •Wet Blasting Machine, and many more to be discovered on our website! We take great pride in our commitment to innovation, consistently elevating industry standards and delivering added value to our customers. Our dynamic team ensures that we stay ahead in technological advancements, swiftly adapting to the evolving needs of our customers. All our products comply with international quality standards. For further details and information, please do not hesitate to contact us: ihracat@auromakmakine.com

Website See all products
EGE-ELEKTRONIK SPEZIAL-SENSOREN GMBH

Germany

We have been developing and producing high-quality sensors for special requirements, challenging environmental conditions and sensors for explosive environments according to ATEX/IECEx – including customer-specific versions – since 1976. Our product range includes: Flow sensors Fill level sensors Proximity sensors Special sensors for pressure and temperature Metal detectors As your sensor specialist, we always have a smart solution for your requirement – either from our extensive range of high-quality standard sensors Made in Germany or as an adapted version with usage-specific characteristics for your automation tasks. Whether you work in mechanical engineering in heavy industry or for an engineering consultancy for automation, we are always here to listen and provide dedicated support for your requirements and ideas in order to find a solution that reduces costs and increases your innovative strength and competitiveness.

Website See all products
BRIO ULTRASONICS

Spain

For over 20 years, the team at A&J Tecno Innovacions S.L. have been designing, manufacturing and selling industrial machinery, notably ultrasonic cleaners, across the country and around the world. We have always been known for our commitment to R&D and our constant determination to reduce the environmental impact and energy footprint of each application, without ever compromising on results. We manufacture machinery for businesses around the world.

Website See all products
TELSONIC AG

Switzerland

The company TELSONIC AG, is a Manufacturer/ Producer, which operates in the Ultrasound systems - Processing plastics industry. It is based in Bronschhofen, Switzerland.
KVT BIELEFELD GMBH

Germany

The company KVT BIELEFELD GMBH, is a Manufacturer/ Producer, which operates in the Ultrasound systems - Processing plastics industry. It is based in Bielefeld, Germany.
HELM - SONOTRODENBAU INH. ERIK HELM

Germany

The company HELM - SONOTRODENBAU INH. ERIK HELM, is a Manufacturer/ Producer, which operates in the Ultrasound systems - Processing plastics industry. It is based in Schaafheim, Germany.
SEIDEL INDUSTRIAL EQUIPMENT CO., LTD.

China

Seidel Industrial Equipment Co., Ltd is a German company specializing in the development and contract manufacturing of small to mid-size machinery & industrial equipment. Furthermore, we are an OEM producer and supplier of Solar Mounting systems and other Components for Ground Installation. All the mounting system solutions we supply are produced on our in-house design machines and robotic systems, giving us excellent control over quality and lead times. With production engineering facilities in China combined with our strong technical know-how and utilization of advanced automated technology, we can manufacture your products quickly, efficiently & cost-effectively to your specifications. We are devoted to research, engineering design, and manufacturing safe, reliable, high-quality products for our clients globally. Our broad manufacturing spectrum, which includes milling, lathing, drilling, and CNC machining, enables us to produce simple to complex machines in our factory. We apply our expertise in new product development and are happy to assist start-ups and customers in developing new products tailored to their needs. Contact us, and we will find the right solution for you.

All the products for "ultrasound"

SSH360 Compact Clean

See all products
HERRMANN ULTRASCHALLTECHNIK GMBH & CO. KG

Germany

Herrmann Ultraschall is a world leader in ultrasonic welding with five decades of expertise. With our 360 ° ULTRASONIC ENGINEERING we offer customer-specific support from concept to production and after-sales support. For our customers we are both consultants and solution providers for welding projects. Through our global network, we have ultrasonic laboratories in 18 countries to support you locally. Ultrasonic welding is joining without gluing, screwing or heat input from outside. As an economical production process with fast cycle times, it offers high process control and reproducible quality. We offer suitable platforms for a variety of applications: - Ultrasonic welding systems for thermoplastic parts - Ultrasonic sealing systems for packaging - Ultrasonic joining systems for nonwovens and foils - Ultrasonic welding systems for non-ferrous metals like aluminum and copper Our ultrasonic technology is used in many industries, such as medical, automotive, packaging, hygiene and energy storage. Our state-of-the-art machines and systems meet all the requirements of modern Industry 4.0 production, whether manual workstation or automation, and thus stand for high efficiency and sustainability.

See all products
GELTEK-MEDICA LTD

Russia

Geltek-Medica company is the largest Russian manufacturer of medical contact media for ultrasound and functional diagnostic, eyelid care products and professional skin care products. Quality standards: ISO 13485-2017, ISO 13485: 2016, ISO 22716 (GMP standard). Professional and home care skin care products for mature skin, dry and sensitive skin, oily and problematic skin, body care products etc. That include proven ingredients and balanced formulas that potentiate the effect of each other, modern ingredients and technologies for the production and delivery of active ingredients into the deeper layers of the skin: peptides, stable forms of vitamins, liposome complexes, safe UV filters of the latest generation. Products undergo two-stage clinical trials. Eyelid care products are indispensable tools for the treatment of eyelid demodicosis and blepharitis. Reduce inflammation, eye fatigue and the dry eye syndrome, restore tear secretion due to wearing contact lenses and working on the computer for extended time periods. Geltek-Medica medical product range involves: Uniscrub - an abrasive scrub used for reducing skin impedance and roughness of the upper skin layer, as well as for skin moisturizing, that allows to acquire high-quality test results without causing any discomfort to a patient. Unipaste - a highly conductive adhesive electrode contact paste for electroencephalography (EEG), electromyography (EMG) and evoked potential (EP) registration of the brain.

All the products for "ultrasound"

Colorless Mediagel Of Medium Viscosity

Mediagel-c (sterile Gel For Ultrasound Transmissions)

Desincrustation Lotion

Mediamix

Colored Mediagel Of Medium Viscosity

See all products