• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • valve maintenance

Results for

Valve maintenance - Import export

  1. SDT ULTRASOUND SOLUTIONS

    Belgium

    Verified by europages badge

    SDT ULTRASOUND SOLUTIONS: Belgian manufacturer of ultrasound maintenance equipment. We help technicians check the mechanical state of machines, bearing lubrification, hydraulic systems, steam traps and tanks to avoid electrical faults and detect compressed air and gas leaks to reduce energy expenditure and reduce production costs whilst extending the life cycle of your facilities.

  2. FRATELLI FAROOQ

    Italy

    FRATELLI FAROOQ is a service company involved in valves assembly and test on behalf of a third party. The continuous improvement and large experience matured raised the company to an high knowledge level concerning more common valves utilized in the oil industry like Trunnion, Floating, Top-Entry, etc. also in severe low temperature conditions and subjected to cryogenic test. The workshop is realized in a safe, sheltered and covered area of about 800m² and supplied with a bridge crane of 5.5 t. FRATELLI FAROOQ offers also Leak Test Level II Qualification in compliance with SNT-TC-1A and can correct machining defects or important components anomalies with support of external mechanical workshops if necessary, anticipating repairing preventive for approval. FRATELLI FAROOQ disposes of a team of qualified workers that can support companies in their own workshops or at sub-suppliers workshops in assembling and testing valves, engines, actuators, motors etc.

  3. MONTAJES INDUSTRIALES EOS, S. A.

    Spain

    The company MONTAJES INDUSTRIALES EOS, S. A., is a Multi-Category, which operates in the Energy - production plants and equipment industry. It also operates in the systems service, valve maintenance, and systems and equipment for oil refineries industries. It is based in Torrejon De Ardoz, Spain.

  4. GEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG

    Germany

    Verified by europages badge
  5. IEC SOLUTIONS

    Tunisia

    IEC Solutions is a growing Instrument & Electrical company operating in O&G and Energy industries to grasp new solutions and concept for Engineering, Construction & Commissioning and star-up project phases: * Instrument & Electrical Engineering, Procurement, Construction, Pre-commissioning , Commissioning and Start-up Solutions. * Design of ICSS system (DCS /PCS, PSD& ESD) and PLC Controllers , * Elaboration of technical drawings according to the standards and requirements of the project. * Fire & Gas safety engineering and installation (Automatic F&G detection and extinction : FM200, CO2). * E&I Maintenance and troubleshooting (Valve, flow, pressure, temperature...) * Process & Utilities design and calculation. * Video surveillance and access safeguarding system.

Office Building Outline icon
A page for your business
Can you see this? Your potential clients will too. Join us now so you too can be visible on europages
  1. ZHEJIANG XINGWEI VALVE MANUFACTURING CO.LTD.

    China

    Threaded ball valveThreaded flange valve is threaded ball and belong to a type of valve , the difference between its closure parts of a sphere , the sphere rotates around the body centerline to achieve open and close a valve . Valve in the pipeline is mainly used for cutting, distribution and changing the direction of media flow . Two ball valve , three valve, is widely used in recent years, a new valve , A threaded ball valve has the following advantages : 1 . Fluid resistance , the resistance coefficient with the length of the pipe sections are equal.2 . Simple structure , small size and light weight.3 . Compact and reliable valve sealing surface material widely used plastic , sealing in the vacuum system has also been widely used.4 . Easy to operate, opening and closing rapidly , from fully open to fully closed as long rotation 90 °, to facilitate remote control .5 . Easy maintenance, simple ball valve , seals are generally active, are relatively easy to replace demolished .6 . In the

  2. EAGLESAM INTERNATIONAL POWER TECHNOLOGY COMPANY LIMITED

    China

    Eaglesam International Power Technology Company Limited is one of the largest companies worldwide specializing in the R&D, manufacturing and marketing of maintenance-free valve regulated lead acid batteries. At present, Eaglesam International manufactures nearly 300 types of products with the nominal voltages of 2V, 4V, 6V, 8V, 12V, 24V, etc., and the rated capacity ranging from 0.3AH to 3000AH. The products are classified into five series: AGM ES Series AGM ESL Series AGM ESF Series AGM ESD Series GEL ESG Series

  3. PRMIA MASZ-ZAP SP. Z O.O.

    Poland

    The Machinery and Valve Maintenance Company “Masz-ZAP” Ltd. Sets as its goal to provide fully professional services that meet the requirements and expectations of our Customers and to constantly improve these services.

  4. SCHUBERT & SALZER CONTROL SYSTEMS GMBH

    Germany

    Verified by europages badge
  5. CIC - KLAUS CZERWONKA

    Germany

    Verified by europages badge

    As a customer-oriented service provider and supplier, we offer a comprehensive and efficient range of services. In our business segments, we serve as an interface between market requirements and the possibilities offered by modern manufacturing processes. Through consulting, mediation, trade or in-house production – our aim is to provide you with the optimum solution for your individual tasks. In doing so, we build on essential values such as partnership, fairness, openness and honesty, diligence and safety, environmental protection and the careful use of resources. We are also fully aware of our social responsibility and are committed – in particular at a local level – to art, culture and the community. Be inspired by our wide range of pneumatic cylinders – double-acting, single-acting and standard cylinders. Our product portfolio also includes telescopic cylinders and rodless linear cylinders. Do you need special solutions? We also have electromagnetic cylinders, telescopic pneumatic cylinders and cylinders with anti-rotation lock. Whether you are looking for working cylinders, boring cylinders, stainless steel special cylinders or pneumatic tandem cylinders, we're sure to have the solution for you. In the automotive, mechanical engineering and medical technology industries, we accompany you through professional project management. We call on all our expertise and experience to support launch management, quality assurance and supply chain management.

  1. TECHNOTRANS SOLUTIONS GMBH

    Germany

    Verified by europages badge

    The fact that the gwk Gesellschaft Wärme Kältetechnik mbH company enjoys such a great reputation as a top expert and innovative specialist in high-quality temperature control and cooling technology is based on an abundance of experience that stretches back more than five decades. Anyone in need of well-thought-out high-tech products ranging from cooling plants via temperature control systems to water treatment solutions will find gwk to be a system provider that manages the entire thermal process, generating individually tailored designs and also delivering engineering and all the necessary components. Also in the area of close-to-cavity temperature control for mould inserts and mould cleaning, gwk offers its customers intensive and individual support. At present over 400 employees are engaged in producing complete process solutions for customers from the plastics, metal processing, food and chemicals industry on every continent. The technotrans group of companies focuses successfully on applications involving liquid technology as its core competence. With 21 sites and about 1, 250 employees, it has a presence in all major markets worldwide. For many years, technotrans has opened up new areas of application based on its core competences of cooling, temperature control, filtration as well as measuring and dosing technology. The strategy aims at a sustainable, result-oriented development.

  2. BEULCO GMBH & CO. KG

    Germany

  1. IRM.ES SRL

    Italy

    The company IRM.ES SRL, is a Service Provider, which operates in the Mechanical engineering - custom work industry. It also operates in the overhaul of hydraulic pneumatic and hydropneumatic equipment, and Control valve maintenance industries. It is based in Gela, Italy.

  2. DC VALVES

    Belgium

    The company DC VALVES, is a Distributor, which operates in the Industrial maintenance industry. It also operates in the Control valve maintenance industries. It is based in Alleur, Belgium.

  3. STRATE TECHNOLOGIE FÜR ABWASSER GMBH

    Germany

    Verified by europages badge

    STRATE has stood for innovative and modern sewage technology for more than 70 years. The company develops sewage pumping stations with the patented separator system that effectively protects the pumps used against clogging. Today, AWALIFT sewage pumping stations are one of the best-known STRATE products with over 41, 000 units sold, and make a significant contribution to saving energy and maintenance costs. Non-return valves as well as ventilation and bleeding valves of all sizes round off STRATE's sewage range. In the industrial sector, STRATE supplies blower and compressor manufacturers with non-return valves and start-up relief valves for air and technical gases. The STRATE service offers the customer a comprehensive range of services, from new installation and regular maintenance to refurbishment, spare parts sales and the reconstruction of existing stations. Today, the company mainly supplies customers in the European markets.

  4. APUMAS

    Belgium

    Verified by europages badge

    Apumas is a company based in Belgium specializing in the selection and supply of filters, pumps, mixers and valves. With 20 years' experience, our dynamic team provides you with its know-how and expertise in industrial processes in the form of advice and tools to find the best solution to suit your needs in the shortest possible time-frame. We can provide you various services and solutions to support you in your technical processes, as well as to appraise, calculate and adapt our equipment to your needs, such as selecting, refurbishing, supplying, installing on site, … pumps, agitators, filters, synthetic valves, turnkey solutions an so on. We can also provide you support for the periodical follow up of your water treatment facilities in collaboration and with the expertise of Inwatec. We distribute a wide range of products, such as volumetric and centrifugal pumps, dynamic and static agitators, as well as self-cleaning and manual filters … FYI, our internationally renowned partners include: ALBIN – FILTERNOX –POMAC – FTI – MASTERFILTER –SERA PRODOS SOMEFLU –STATIFLO – SYDEX. To appraise, carry out maintenance and repair your equipment, our workshop only uses original spare parts. Feel free to contact us for more details!

  5. AGROMATIC REGELUNGSTECHNIK GMBH

    Germany

    Verified by europages badge

    The electric actuators from Agromatic are perfectly suited to all areas of industry for moving, regulating and controlling valves. Since 1972, we have been specialists in electromechanical actuators, becoming one of the leading providers in our field. Our international customers are mechanical and systems engineers from all kinds of industrial sectors. Agromatic develops and offers a wide range of electric actuators, produced exclusively in our plant in Oerlinghausen, East Westphalia, and developed and suited to the individual and specific requirements of our customers. Our sales team is happy to offer advice and answer your questions. Agromatic actuators are long-lasting and reliable with low maintenance costs. Wherever regulation and control of gas, liquid or solid inflow is required, our actuators ensure safety in even the most difficult climatic conditions and extreme temperatures.

  6. MD INDUSTRIE

    France

    Verified by europages badge

    MD Industrie is a French company specialising in upgrading energy efficiency for professionals. For several years, we have been offering high quality, high performance thermal solutions such as insulation for singular points, but also heat insulation and loft or underfloor insulation. To guarantee the best performance when insulating your singular points (valves, taps, flanges, etc.), we create our own insulating cushions in our workshop in the Rhône-Alpes region. These are eligible for EEC grants. Made to measure, our products are easy to install, and we use the very best materials to ensure that the thermal insulation can withstand very high temperatures, giving you the most effective product possible. Saving energy, protecting your personnel from the risk of burns, facilitating the work of maintenance teams, improving the performance of machines... just a few of the reasons to insulate your singular points with our insulating cushions. We have over 2000 square metres of stock to allow us to serve any type of sector of activity (pharmaceuticals, agrifoods, tertiary, etc.). Do not hesitate to contact us to submit an eligibility request, as MD Industrie can provide a fully subsidised turnkey solution which guarantees: - Management of your EEC grant dossier, -A high quality product Made in France, -Installation managed by our own qualified teams, -No cash advances required.

  7. SYNTHERM

    Netherlands

    Verified by europages badge

    SynTherm is a supplier of innovative technical solutions in the field of energy saving and maintenance improvement, for industry, power generation, shipping and offshore.SynTherm is an agent and distributor of renowned manufacturers of the following products: GEM orifice venturi steam traps without moving parts, saving on energy and maintenance, 10 years performance guarantee; Wrap Seal quick repair products for pipe leakages; Tom-Pac sealing compound the replacement for braided packing and mechanical seals in pumps, agitators and mixers, zero leakage, no cooling water, on-line maintenance; GO Switch magnetic limit switches and position sensors for the most demanding plant conditions such as hot (204°C) cold (-40°C), wet, dirty, abusive, corrosive and for explosive environments, no power to operate; TopWorx / Emerson discrete valve controllers and valve position indicators.

  8. KITO ARMATUREN GMBH

    Germany

    KITO® is a German manufacturer of safety devices for explosion protection and for vent valves for atmospheric application. KITO® devices are developed and produced for transporting and storing combustible fluids and gases since over 90 years in Braunschweig. Our products are applicable in the chemistry, petrochemical sector and pharmaceutical industry, renewable energy (bioethanol/biodiesel) as well as in the oil and gas industry. We also develop customized solutions for our customer’s installation or products. All our products correspond to the newest technical norm and safety requirements. With our world-wide network of representations we are able to provide a qualified local service for international customers. We continually update our customers as well as our maintenance partners for our devices maintenance in order to reach a long service life and a reliable function.

  1. A J SERVICES

    United Kingdom

    A J Services have been supplying the HVAC industry for over 30 years with a range of access doors and dampers which are manufactured at the Birmingham headquarters as well as supplying a variety of top quality components which can be used in the completion of a full heating, ventilation and air conditioning system. AJS are always aiming to stay at the forefront of innovation and safety which means new items are continuously being added to the already expansive 70, 000 item product line. Access door are supplied in a variety of styles - circular, oval and tabbed as well as being manufactured from aluminium, galvanized and stainless steel. The dampers are manufactured to specification with multi leaf, non return, single blade, smoke, fire butterfly and volume control dampers all options.On top of these AJS can also supply a host of items, which have been designed in order to complete a full HVAC system this includes: Air Valves, Grilles, Louvres & Diffusers, Filters, Silencers, Duct Insulation, Spiral Duct & Fittings, Rectangular Duct & Fittings, Flange System, Turning Vane & Track, Flat Oval Duct & Fittings, Flexible Duct, Banding & Clamping Products, Suspension Products, Slotted Channel, Gaskets, Sealants & Tapes, Duct Pain. AJS can also provide fully trained and qualified technicians to complete a host of services including: ducting installation & cleaning, fire & smoke damper testing. As well as maintenance, repairs and installation for air conditioning systems.

  2. GIESSE

    Italy

    GIESSE GROUP Born in 1960 for the mechanical processing of molds for thermoplastic materials and valve seats for marine engines, from the early seventies the GIESSE GROUP began to establish itself in the textile machinery sector with the design and production of innovative machines for the production of fancy yarns, in particular " chenille". Today the GIESSE GROUP is the most qualified manufacturer of machines for fancy and chenille yarns: modular, electronically controlled and highly energy efficient. The GIESSE GROUP holds international patents for mechanical and electronic components that make its machinery unique in terms of product quality, energy efficiency and reduced production and maintenance costs. A widespread network of technical and technological assistance and a rapid spare parts supply service always guarantee users maximum efficiency and production continuity. Service, consulting and training. GIESSE GROUP proposes itself not only as a supplier of machinery but also as a partner of its customers for: Technical, mechanical and electronic assistance for installed machines. Technological consultancy for the optimization of the use of machinery. Reconditioning and updating of installed machinery in order to keep them in full efficiency. Mechanical, electronic and technological training courses for updating the qualifications of the Customer's staff.R esearch and development.

  3. HARTMANN VALVES GMBH

    Germany

    As one of the leading manufacturers of ball valves, pig valves and wellheads, Hartmann Valves is active in the oil, natural gas, petrochemical, power plant technology, geothermal and renewable energy sectors all over the world. Design, assembly and tests are carried out exclusively at the German plants. Designed on a customer-specific basis, Hartmann high-performance fittings are suitable for temperatures ranging from -200 to +550 °C, pressure levels up to 700 bar as well as for up to 200, 000 switches a year and can withstand aggressive media such as oil, natural gas, sour gas, syngas, oxygen, hydrogen, helium, steam, thermal water, coal dust, mud, slag & ash, polymers, cellulose as well as abrasive and degreasing media. The pure metal seal system is especially durable, long-lasting and low-maintenance. Our API 6A-conformant wellheads and subsea trees are equipped with metallic sealing ball valves and have been successfully in use for decades.

  4. WROPOL ENGINEERING SP. Z O.O.

    Poland

    We have been operating since 1985 as a manufacturer of hydraulic actuators and units. We established the Wropol Engineering plant in Lutynia, in Dolnośląskie Voivodeship. The elements are manufactured on the basis of the documentation provided to us. Forthermore, our Research and Development Department creates Wropol's original designs. Our production has been meeting strict standards of the PN-EN ISO 9001: 2015 Quality Management System since 1988. We manufacture ready-made and custom hydraulic actuators. We supply standard actuators, Cr rods, pipes and eartips. Our range further includes: - briquette presses (swarf and chips of non-ferrous metals and aluminium), - hydraulic power supplies (for mechatronic machines), - specialized machinery and equipment, - hydraulic blocks, - hydraulic valves (ZD, ZZ, ZDZ, ZSZ). We also offer actuator repair service. Only certified substitutes are used for maintenance work. We are able to upgrade the system to meet the requirements of your industrial plant. Hydraulic power units are mainly manufactured on Hydac, Parker, Bosch-Rexroth and Kawasaki Hydraulics components. We are in constant cooperation with research centres, therefore ensuring the highest quality of all our projects. We invite you to contact - Wropol Engineering company from Lutynia.

  5. ENGIC (PTE.) LTD.

    Singapore

    Established in 2009 in Singapore, Engic (Pte.) Ltd. is one of the leading Engineering, Procurement and Construction Management (EPCM) services provider in Singapore and region. A Statutory Members of SBF (Singapore Business Federation) and SAC ISO 9001, 14001, 45001 and BizSafe Star certified services company to Oil and Gas, Power and Alternative Energy, Marine and Shipbuilding, Water Supply and Sewage, Aerospace and Aviation, Industrial Process, Civil Infrastructure, General Construction and ‘Etc.’ Industries. The company operations are divided into 3 segments: Trading, Services and Manufacturing. Trading Division: Valves and Actuators, Flanges and Pipe Fittings, Energy and Standard Tubulars, Structural and Electric Conduits and Oilfield and Drilling Equipment’s. Services Division: Project Management, Engineering and Design, Procurement, and Maintenance (Asset Management - Maintenance, Modifications and Operations (MMO)) activities. Manufacturing Division: Carbon Steel, Stainless Steel, Alloy Steel and Non-ferrous Metal Flanges and Pipe Fittings in all sizes and configurations in accordance to all standards.

  6. YAJI PRECISON COMPONENT (SUZHOU) CO. LTD

    China

    Yaji precision component co. Ltd was established in 1984 in Taiwan. In 2003, investing new factory which is located Suzhou Industrial Park, and devoted to near hundreds well-know Japanese CNC automation machine (Tsugami and Miyano) has been involved in manufacturing kinds of connector for telecommunication, pneumatic, hydraulic, RF coaxial, valve body, and medical by advanced processing technology with strict inspection equipment. It passed quality system ISO 9001 2008. Meanwhile, to reach better production process. Who commits itself to promise and perfection with production units fully armed with highly trained engineers and top quality CNC machining equipment that manufacturer effectively with high standards and good maintenance before any wrong operation happening.

  7. ARMAS SU ARMATURLERI

    Turkey

    ARMAŞ A.Ş. was founded in 1998 to produce valves for potable water and agricultural irrigation systems. It has become one of the leader establishments of its sector in a short time thanks to ARMAŞ makes valves. ARMAŞ A.Ş. has given high quality services with economical prices to his costumers in industry, potable water networks and agricultural irrigation systems by means of Hydraulic Control Valves, Automatic Filtration Systems, Gate Valves, Ball Valves, Strainers, Check Valves, Air Valves and Hydrants he produced. Our company who does not sacrifice quality in production has used ISO 9001-2000 Quality Management System since 2000. In the scope of importance we gave for both human and environment, we have developed our institutional structure day by day with ISO 14001 Environmental Management System Certificate and TS 18001 Occupational Healthy and Safety Certificate since 2007. Our products have been subjected to pressure and performance tests before sales by Quality Control Department and technical support services have been given at the installation, operation and maintenance stages after sales by our experienced engineers. Our company who have continued R&D investments in order to present more quality and reliable products to his costumers, will continue its costumer-satisfaction focused services with increasing achievements in future thanks to his dynamic staff, powerful brand and permanent developing structure.

  8. ELACTIS SA

    Switzerland

    Elactis is specialized in electronic control of solenoid valves and electromagnets. We produce power saving solutions, control electronics with diagnostics. Standard and customer specific products are available as DIN 43650 connectors or boards to be integrated into the coil.. Products are available to drive solenoids from battery voltages up to 230 VAC and for low power valves up to 1kW electromagnet coils for braking and locking applications. We also offer proportional control electronics for valves: proportional driver, IP converter, electronic pressure and flow regulator We serve individual requests from a few part up to several hundred thousand. From harsh industrial environment to consumer products the drivers find different applications such as dosing, sorting, power saving, heat reduction, preventive maintenance. Elactis is part of Gevasol Group offering custom fluid control solutions.

  9. FRANCE PROTECT - CFPI

    France

    Company specialized in the installation and maintenance of fire safety equipment: fire extinguishers, fire alarms, desenfumage, dry column, automatic detectors, evacuation plan, fire training. France Protect is the recognized leader for fire protection solutions in France for a wide variety of industries. We are a full-service provider of fire protection engineering, design and installation services, as well as inspection, testing and maintenance services with our dedicated team of experts have an average of 40 years’ experience. France Protect can serve as a single-source for fire protection inspection, testing and maintenance services to provide our clients with superior compliance services by certified technicians. We provide services for fire protection systems, including: Deluge, water spray, vapor mitigation and sprinkler systems Hydrants, post indicator valves and fire monitors Fire pumps and fire apparatuses Fire hoses Fire trucks Fixed and portable fire extinguishers Smoke, flame and incipient fire detection Manual and remote controlled fixed monitor systems Emergency alarm and mass notification systems Combustible and toxic gas detection systems Clean agent fire suppression systems CO2, dry chemical and foam-based fire suppression systems This fire safety company is located in Vichy, Montluçon, Moulins, Limoges and Clermont-Ferrand in France. Keywords: Blocs Autonomes De Secours, Désenfumage, R.I.A, Colonnes Sèche

  10. SIGMATECH

    Greece

    Sigmatech is a customer oriented company. It can be your one stop supplier for equipment, spare parts and complete systems according to customer specifications. It supplies high quality instrumentation, automation gear, valves, hoses, pneumatics, hydraulics, specialty chemicals and special equipment. Its products find their way to companies in the maritime sector, plant construction and maintenance, oil and gas industry, renewable energy and EPC contractor business. It efficiently serves its customers worldwide. Long term collaboration with first class European suppliers, large inventory and computerized systems guarantee a fast and reliable service at a reasonable cost.

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free