Aluminium conductors - Import export

This conductor consists of a solid or stranded steel core surrounded by strands of aluminium ACSR CONDUCTOR is available in a wide range of steel varying from 6% up to 40%. The higher strength ACSR CONDUCTORS are used for river crossings, overhead earth wires, installations involving extra long spans etc.. against any given resistance of conductor, ACSR conductor may be manufactured for having a wide range of tensile strength as per requirement. The principal advantage of these conductors are high tensile strength and light weight with longer spans as well as with less supports. Due to the greater diameter of ACSR CONDUCTOR much higher corona limit can be obtained causing big advantages on high as well as extra high voltage overhead lines.

ACCC® conductor (Aluminum Conductor Composite Core) is a high capacity, low sag conductor which consists of a carbon fiber composite core encased in a protective fiberglass sheath that is helically wrapped with conductive aluminum strands. ACCC® conductors combine efficiency and increased current carrying capacity to deliver more power with less losses based on equal conductor size and weight. It was developed and patented by CTC Cable Corporation, now CTC Global. EMTA is official strander of ACCC® that is a registered trademark of CTC Global. (US)

PHASE CONDUCTORS Phase conductors made of aluminium wires are circular stranded, rounded and compacted with smooth circular surface. Our products are avaible 16 mm2 as solid, 25 to 70 mm2 7 wired; from 95 mm2 to onwards as 19 wired confirming TS 11654. MESSENGER (NEUTRAL) CONDUCTOR Bare, round, stranded and compacted aluminium alloy (294 N/mm2). INSULATION Phase conductors of Aerial Bundled Cables are insulated by black coloured PE or XLPE which are weather resistant. CORE IDENTIFICATION Phase conductors two, three and four longitudinal ridges, street lighting conductor without ridges. USAGE AREA & ADVANTAGES OF ABC SYSTEMS The usage of Aerial Bundled Cables in low voltage networks provides important saving in installation costs, while it ensures the same reliability and safety, replaces bare conductors in overhead distribution lines and increased very rapidly all around the world. Compared to the copper conductors aerial bundled cables are lighter and more economical.

AXON'CABLE offer lightweight microwave coaxial cables: they are 30% lighter than the avionics WN standard. Light and thin, they exhibit excellent mechanical and electrical performance. Advantages Excellent attenuation values, 15 dB for 100 m at 1 GHz, Temperature rating: -55°C to +180°C, Characteristic impedance: 50 Ω, In accordance with EN 4604-009 avionics KW standards. Construction Axon' lightweight coaxial cables are made with: an aluminium conductor and a Celloflon® dielectric (expanded PTFE), a silver plated copper braided shield, a reinforced aluminium braided shield and a FEP outer jacket. Can be terminated with (up to 18 GHz): SMA plug, straight or swept 90° TNC plug, straight or swept 90° N plug, straight or swept 90° N jack, straight up to 12 GHz. Applications Aircrafts, Helicopters.

Self-supporting protected composite wire with a conductor made of aluminum alloy, with a central strength member made of FRP rod in PE sheath (or without it); around it are stranded tubes containing up to 24 optical fi bers each and (if necessary) fi lling dummy tubes; outer sheath made of light-stabilized cross-linked PE. The wire is designed for suspension and service on supports of aerial power lines for rated voltage of 20 and 35 kV in atmosphere of types I, II and III in climatic version B according to Russian National Standard GOST 15150-69, in atmosphere over sea and salt lake shores, in industrial zones, and saline lands. Operational temperature of the cable is from -60°С to 70° С. Minimum temperature for installation is -30°С.

Optical cable for backbone networks with a central strength member made of FRP rod in PE sheath; around the central strength member are stranded tubes containing up to 24 optical fibers each, filling dummy tubes (if necessary), insulated copper conductors, with laminated aluminum PE tape; in inner PE sheath, with an armor made of round steel wires and outer PE sheath. Operational temperature of the cable is from -40°С to 70°С. Arctic version -60°С to 70°С Minimum temperature for installation is -30°С.

For transmission of electric power in overhead electric networks, used in I and II type atmospheric air provided that the content of sulphur trioxide in the atmosphere is not more than150mg/m2 per day (150mg/m3) and according to standard 15150-69 in all microclimatic regions of the land.The conductor is made of aluminum wire by twisting. In case of twisting in layers, the twisting is performed in opposite directions. Indicated in the table. According with customer’s request and agreement conductors with different construction length can be manufactured.

On derivations of aerial lines and installation in walls of facilities in second and third type atmospheric air according to the standard 15150-69.1. The conductor is twisted by aluminum wires made from aluminum wire by twisting, Compacted. 2. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effectAgreed during receiving order from the customer. Conductor cores are marked with figures 1, 2, 3. An inscription is made on conductor core: “JSC Sakcable” cable brand, manufacture year

In magisterial air lines and its derivations in the second and third type of atmospheric air, accordance with standard Gost 15150-694. The conductor is twisted by aluminum wires and it is compacted. 5. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effect 6. Neutral conductor is twisted with aluminum solid wires or aluminum wire with steel core and uninsulatedagreed during receiving order from the customerMarking of conductor cores with figures 1, 2, 3. On one of the conductor cores an inscription is made: “JSC Sakcable”, cable brand, manufacture year

For supply and distribution electricity to power and lighting networks with variable voltage 0,660 / 1 kV . Used in the main overhead power line and in residential branching.1. The conductor is twisted by aluminum wires and it is compacted. 2. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effect 3. Neutral conductor is twisted with aluminum solid wires or aluminum wire with steel core and uninsulatedagreed during receiving order from the customerMarking of conductor cores with figures 1, 2, 3. On one of the conductor cores an inscription is made: “JSC Sakcable”, cable brand, manufacture year

AS: For transmission of electric power in overhead electric networks, used in I and II type atmospheric air provided that the content of sulphur trioxide in the atmosphere is not more than150mg/m2 per day (1.5mg/m3) and in all microclimatic regions of the land according to standard 15150-69. ASKP and ASKS: Used on the seashores, in industrial regions, salty sandy regions, as well as regions adjoining them in II and III type atmospheric air provided that the content of sulphur trioxide in the atmosphere is not more than150mg/m2 per day (1.5mg/m3) and Chlorine salt not more 200 mg/m2 ,in all microclimatic regions of the land according to standard 15150.The conductor is made by twisting of the steel conductor and aluminum wire. Regarding to the structure, the steel core is single-wire or twisted multi-wire. In case of twisting in layers, the twisting is performed in opposite directions.

In aerial lines with rated voltage 10/30kV in second and third type atmospheric air according to the standard 15150-69, including shores and industrial and salty sand regions. 1. The conductor is made from aluminum wire by twisting. Compacted with a special device. 2. The insulation is thermo and lightproof . It is also resistant to ultraviolet radiation and ozone effect XLPE insulationagreed during receiving order from the customerAn inscription is made on conductor core: “JSC Sakcable” cable brand, manufacture year.

heracle offers germanium doped fused silica graded index multimode fibers needed for data communication at the optical wavelengths 850 nm and/or 1300 nm. The metalized optical fiber is supplied with either 24 kt Gold or Aluminum coatings. As an electric conductor, these types of coatings provide the user with the ability to terminate the fiber directly onto the coating, supporting hermetically sealed assemblies. Gold and Aluminum coated fibers are capable of withstanding extreme temperatures and harsh environments. The manufacturing process utilized in the production of these fibers result in low stress corrosion susceptibility, and thus offering improved mechanical protection to the optical fiber when used in the most challenging harsh environments. All metal coated graded index fibers are 100 % quality tested to Heracle‘s stringent test procedures in accordance with the Telecommunications Industry Association (TIA/EIA) and international Fiber Optic Test Procedures (FOTP).

This conductor is also known as aluminium stranded conductor. It is manufactured from electrolytically refined aluminium, having purity of minimum 99.7% AAC is used mainly in urban areas and the spacing is short and the supports are close. All aluminium conductors are made up of one or more strands of aluminium wire depending on the end usage. These conductors are also used extensively in costal because it has a very high degree of corrosion resistance.

Aluminium Compacted Conductors from 16mm2 to 800mm2 for cable manufacturers.

Used as bare overhead conductor for power transmission and distribution lines on aerial circuit that require a larger mechanical resistance than AAC, and a better corrosion resistance than the one produced by the ACSR. The sag characteristics and the strength-toweight ratio is better than AAC / ACSR.

EMTA Conductor & Cable has worldwide experience in rod manufacturing for different standarts and countries. EMTA has produced in excess of 60,000 metric tons of Continuous Cast Aluminum Rod in its own plants in Kadirli. EMTA Aluminum Continuous Casting and Rolling lines are designed to produce pure electrical conductor grade aluminum rod by using A7E (purity of 99,7%) and A8 (purity of 99,8%) and alloy conductor grade aluminum rod coils directly from pure molten metal on a continuous basis. EMTA can produce heat-treatable alloys rod with tempers supplied which from F (as Fabricated) to T4 (Thermally Treated). EMTA manufacturing lines are designed to produce from 9.5 to 15 mm diameter rods in level wound coils and packed in both "Eye to Side" and "Eye to Sky" coils of 2 tons covered with paperboard and plastic shrinkage to be delivered on wooden pallets.