Heating elements - Import export

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

Made of high-alumina chamotte containing 65 to 72% Aluminum oxide. Sintered high-alumina ceramics' high thermal conductivity allows obtaining the most uniform temperature across the radiation surface, providing uniform and high-quality radiant heating. These elements are often used in thermoforming machines, drying chambers, infrared tunnels and panels, heating and drying equipment, and various commercial heaters. Estimated service life at least 8,000 - 10,000 hours of non-stop operation. Maximun temperature 750°C. Comply with all international standards and are interchangeable with all known brands (FTE/FSR/FSF/HTC/HTE).

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

ICH-400 series infrared quartz heaters are used in industrial and commercial heating systems where instant heat response is required: thermoforming, drying chambers, infrared tunnels and panels, heating and drying conveyors, and other infrared systems. These emitters are essential tools for the processes that need an immediate heat-up and cool down, where the product could be damaged because of a heater remaining too hot after the power is cut off. Maximun temperature 730°C. EUROLINIA quartz heating elements are hand-made using the best available components to bring you excellent performance and service life of up to 8000 hours of non-stop operation.Comply with all international standards and are interchangeable with all known brands (FQE/HQE/QQE/SQE)

InfraLine-200 series heaters are equipped with a special polished stainless-steel reflector with higher thermal insulation for maximum heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 700°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

InfraLine-200 series heaters are equipped with a special polished stainless-steel reflector with higher thermal insulation for maximum heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 700°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

InfraLine-100 series heaters are equipped with polished stainless-steel reflector that increases the heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 600°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

InfraLine-100 series heaters are equipped with polished stainless-steel reflector that increases the heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 600°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

InfraLine-100 series heaters are equipped with polished stainless-steel reflector that increases the heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 600°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

InfraLine-200 series heaters are equipped with a special polished stainless-steel reflector with higher thermal insulation for maximum heat output, reduces sideways heat dispersion, and produces an even spread of heat at approximately 90°. InfraLine heaters may consist of up to 3 ceramic infrared heating elements ranging from 250 to 1,000 Watts for each element. Maximum temperature up to 700°C. Setup and maintenance of the InfraLine heaters is very simple and straightforward. You can install them almost on any surface and precisely direct them to the desired heating area. InfraLine heaters can be grouped in sets and equipped with a control system.

QSun-A2 (1600W) is good for 8-15m2 depending on the insulation level. Equipped with a remote control. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-M2 (1600W) is good for 8-15m2 depending on the insulation level. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!

QSun-A1 (800W) is good for 5-12m2 depending on the insulation level. Equipped with a remote control. When it comes to heating open spaces like summer cafes, garages or warehouses you can’t find anything better than targeted infrared heating. Common convection systems rely on generating hot air currents and usually ridiculously ineffective because the heat is simply lost through poor insulation. QSun-M doesn’t have this problem because all the heat is going directly from the heater to the end user without losing energy for warming the entire place. For QSun-M series we use black (ICH) ceramic heating elements of our own production. These elements are very reliable and durable with practically no visible light during operation. ICH long-wave emitters produce soft and gentle heat that feels very close to the biggest infrared heater that we know - the Sun!