Bulk materials for construction - Import export

It is used for conveying inclined or horizontally such products as; non-adhesive, powdery, causing less wearing, brittle, fine or medium size granular products

It provides high strength. It is easy to use. Time and material savings provides. It is economical CONSUMPTION AMOUNT Product kg / m2 Brick (8.5x19x19) 5,05 Brick (13.5x19x19) 9,39 Pumice Brick (10x39x19) 3,27 Pumice Brick (15x39x18) 4,81 Pumice Brick (20x39x19) 5,32 Pumice Brick (25x39x18) 7,55

It is a mold plaster used in shaping ceramics and ceramics.

INSTRUCTION MANUAL 1- First, water is poured into a clean container. 2- 10 kg to approximately 4.8- 5.0 kg of water PLASTER BASED SPECIAL PURPOSE JOINT FILLER is added. 3- Mix for 3 minutes with 60 seconds of sipping and 60 seconds of waiting. 4- The molds and materials to be used must be clean. 5- Before completing the setting time, the amount mixed in the container at room temperature should be used. 6- Completion of the application before the start of the first freeze should be provided. 7- The mortar mixture, with its flexible and easy application, It dries in minutes. 8- In the joints where gypsum-based special purpose joint filler is used There is no need to use joint tape.

Surface preparation; Before starting the application, the surface should be cleaned of dust and anti-adhesive substances. The smoothness and mechanical health of the application surface should be checked. Application; The appropriate consistency of the mortar is 25 kg of joint filler in 5-7 liters of water. With a low-speed mixer, the joint filler is mixed into clean water for 3-5 minutes so that no lumps remain. The mortar, which is left to rest for 5 minutes, is mixed again for a short time and becomes ready for use.

Joint tape at plasterboard joints used with. It makes the application surface smooth. It does not crack in the joints. It has high adhesion. It is economical.

EPS, XPS, composite sheet, plasterboard and rock internal thermal insulation fast adhesion in applications provides the opportunity. It is economical.

Ideal for detail work. It is aesthetic. It is economical.

Acrylic copolymer emulsion based, surface filling feature, colored Pigmented, mineral-added, High Adherence Concrete Primer is a colored primer that allows concrete wall and ceiling surfaces to be plastered with gypsum plaster. Thanks to its quartz sand-added formula, it strengthens the adhesion strength of gypsum and gypsum-lime-based liquids to concrete surfaces, and prevents rapid water loss of the plaster and the formation of cracks due to it. For indoor use, not recommended for use on damp and wet surfaces. Do not store below 5 0C Scope of application Especially on concrete-based surfaces, vertical and horizontal (column, curtain, wall, ceiling and similar) is used as adherence primer before gypsum plaster

Makes the surface ready for paint, saves paint. Oz does not. It is aesthetic. It is economical

Repair and renovation application makes it practical. High addressability has.

Repair and renovation application makes it practical. High addressability has.

GLASROC X SHEATHING BOARD 12.5MM Glasroc X Sheathing Board 12.5mm is a high performance gypsum sheathing board with mould resistant properties. WHERE TO USE Use it to provide external weather protection to Steel Frame System (SFS) constructions prior to the installation of the finished exterior façade system. COMPOSITION This product is made up of a gypsum board with a glass fibre mat reinforcement which has inherent mould resistant properties. The mat protects the board with its hydrophobic coating, and has additional UV resistant properties. PERFORMANCE Here we only provide performance information related to the product. Please see the White Book for system-dependent performance. EFFECT OF CONDENSATION The thermal insulation and ventilation requirements of national Building Regulations aim to reduce the risk of condensation and mould growth in new buildings. However, designers should take care to eliminate all possibility of problems caused by condensation,

Gilsonite is a key ingredient in our products. It differentiates Asphalt Systems from others, it is a trade name for Unitahite or Unitaite. It is a hydrocarbon-based mineral product. Until recently it wasn't considered a coal, oil product, or asphalt. Now it is recognized as an asphalt.Today gilsonite is used in the electrical industry.It is still used to line pipes and tanks because of its resistance to chemicals. It is used to insulate underground pipes for steam and hot water.it is olso uses in ink paints and varnishes.

SHERA board is the perfect choice for building board applications such as drywall construction, cladding, partitioning and decorative walling. The types of buildings that are suitable for SHERA board applications are residential, commercial and industrial buildings as well as schools and hospitals; especially where speedy construction, cleanliness and hygiene is of high importance. SHERA Board is a non-asbestos fibre-cement product composed of Portland cement, cellulose fibre and refined sand. Using a special manufacturing process called autoclave, SHERA board acquires the strength, durability of cement and easy workability of wood as well as dimensional stability. - Weather resistant - Immune to water damage - Fire resistant - Provides sound insulation - Shatter resistant - Low shrinkage - Flexible - High degree of workability - Termite resistant

SFC (Europe) Ltd now have bar in stock for immediate despatch. Get in touch with us with your requirements. Tel: + 44 (0)1902 314533 www.sfc-europe.com

We produce graphene by mechanical exfoliation of graphite in an aqueous medium without the addition of chemical additives, which gives us much more properties than using chemistry. We also have a filtration system with the ability to select from 1-3 layers to 1-8 (it all depends on your desires). At the moment, our volumes are up to 100 kg / month. With huge quantities, the cost can be below 0,95$ gram. We supply this graphene in dry form (powder). Applications: Graphene batteries, nanoinks, supercapacitors Electrically conductive inkjet particles, solar energy, Conductive nanocomposites, Conductive films/coatings.

Graphene nanopowder obtained by mechanical exfoliation of graphite. Condition New Production Ukraine We produce graphene by mechanical exfoliation of graphite in an aqueous medium without the addition of chemical additives, which gives us much more properties than using chemistry. We also have a filtration system with the ability to select from 1-3 layers to 1-8 (it all depends on your desires). At the moment, our volumes are up to 100 kg / month. With huge quantities, the cost can be below 0,95$ gram. We supply this graphene in dry form (powder). Applications: Graphene batteries, nanoinks, supercapacitors Electrically conductive inkjet particles, solar energy, Conductive nanocomposites, Conductive films/coatings.

As Fly Kimya, we have been producting foam polyuretane and polyurea for many years. We export polyurethane and polyurethane raw materials to more than 30 countries around the world. In the new year, we have expanded our product portfolio with other raw materials such as PMDI, MDI, TDI, etc. Sectors in which we mainly sell products: insulation companies, construction companies, shoe sole manufacturers, foam mattress manufacturers, sandwich panel manufacturers, etc.) In addition to supplying raw materials, we also manufacture sandwich panels and polyurethane spraying machines. Our raw material and sandwich panel factory is located in Istanbul. Our polyurethane spray gun manufacturing machine and warehouse are located in Kayseri.

Spectrophotometer, For continues In– Line colour measurement Description Colour measurement based on the standard CIELAB. Continuous onlineidentification of colours and indication of the deviation from the colourstandard. Colour determination of products with smooth and planar surfaces, no abrasive bulk material. Through the modular construction (Sensor and evaluation unit are separate), the sensor can be installed at a difficult accessible places. This ensure the easy handling. With the easy to use calibration function (calibration button), our customer can take spectra's for the calibration with the calibration button at the measurement place and read the internal stored spectra's with the calibration software. Due to this function and the open calibration system our customers can expand independent an existing calibrations or create new calibrations.

There are currently 14 injection molding machines with clamping forces from 60 to 250 tons in our production plant. The maximum weight is about 600 grams. We process both bulk and construction materials. We process materials such as: - PP, - PE, - PVC, - PA6 (also modified varieties - e.g. modified with glass fiber up to 40%), - PA6.6, - POM, - PBT, - Thermoplastic elasotmers, - SAN, - PS, - PC, - PMMA.

Gomastit 701 is a painting compatible sealant based on acrylic dispersion. Suitable for slight movement joints in interior and exterior use and repair of wall cracks. Adheres to absorbent construction materials such as concrete, wood and masonry.

Gomastit Spiegelkleber is an elastic adhesive based on SMP. Adheres mirrors and coated glass perfectly on various construction materials inclusive plastics.

Construction equipment

Construction materials

Construction materials

Steel Door

Laminate flooring