Clean rooms - Import export

Cleanroom bags and films - low-particle cleanroom bags and cleanroom films for research, pharmaceuticals, medicals Highest quality standards according to DIN EN ISO 14644, ISO 7, ISO 5 are fulfilled.

Pre-assembled assemblies for the clean room A kit consisting of parts that we have cleaned very finely is put together appropriately for clean room conditions and packed airtight. In this way, the assemblies can be brought directly to the appropriate production site without having to be unpacked or cleaned beforehand.

This high-end lift truck adhesive mat for cleanrooms and hygienic areas is a high-performance, antimicrobial mat or floor covering for walking on and light vehicles, such as lift trucks. This high-end lift truck adhesive mat for cleanrooms and hygienic areas is a high-performance, antimicrobial mat or floor covering for walking on and light vehicles, such as lift trucks. Reduced particle counts on the floor (up to 99.9%) and airborne particles (up to 75%) in critical areas.

A clean room is a controlled environment used for the production of very clean parts. starlim//sterner owns a clean room that meets the requirements of the following standards: ISO 14644-1 class 7 & 8 (defines the number of particles in the air) and GMP class C or D (defines the number of germs in the air). These silicone and 2-component parts are produced for the medical and the pharmaceutical industry. We also produce small and miniature parts for the automotive industry . The clean room incorporates the complete manufacturing process such as injection molding, post curing, washing and packaging of the molded parts. SHARE:

flexible coating as surface protection for concrete floor, decorative coating

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of...

Our production is done in specifically equipped rooms, to rule out the possibility of product contamination from the outside. This includes, for example: special access authorisation, airtight walls and ceilings, windows that cannot be opened, air supply to the rooms being filtered, higher inside air pressure in relation to the outside air, insect lamps to prevent contamination with insects, mandatory protective clothing, shoe covers, gloves and hair covers, written authorisation with documentation for all work or events taking place in the rooms, such as cleaning, conversions, malfunctions. We have specialised in the particular needs of the pharmaceutical, food and health industries. All production takes place under clean room conditions and in compliance with the highest hygiene standards. Some sections are FDA-approved. Food additives are processed in accordance with the HACCP principles and in compliance with the European food hygiene directives and are prepared for dispatch.

laboratories, clean rooms, hospitals, any sterile place … Advantages: very effective way to remove all dirt and dust thanks to the sticky surface 30 numbered adhesive sheets for easy count each sheet can be used several times before being removed adhesive lower surface for better adherence easy to use hygienic

The IKO High Rigidity Precision Linear Slide Unit BWU is a small limited linear motion guide with two rows of balls in contact with the raceway at four points, allowing stable accuracy and rigidity to be achieved even in applications where fluctuating or complex load is applied. It is available in abundant sizes and can be selected according to the application. Since the integrated table and bed grind the two track grooves simultaneously, machining errors are fewer, the dimensional accuracy between each row can be easily increased, and highly accurate and extremely smooth operation is possible. Stainless Steel Stainless steel types are also available, with excellent corrosion resistance and ideal for use in clean rooms, such as in medical equipment, various disc readers and semiconductor manufacturing devices.

Interchange specifications are available. Since the slide unit and track rail dimensions are separate, each can be individually added or exchanged. Click here for details on the interchangeable type Length of Slide Unit Four types with the same crosssectional dimensions but different slide unit lengths are available short type, standard type, long type and extralong type. Each can be selected according to the application. Flange Type and Block Type Slide unit shapes include a flange type that can be mounted from either the top or bottom, and a narrow block type. Dimensional Compatibility with Ball Type Since the mounting dimensions are the same as the ball type Linear Way H, it is easy to include in the specifications of machines and equipment. Stainless Steel Stainless steel types, with excellent corrosion resistance, are also available. They are ideal for use in clean rooms for medical equipment, various disc readers and semiconductor manufacturing devices.

CLube Linear Way MUL is a USeries linear motion rolling guide with a Ushaped track rail crosssection and builtin CLube lubrication that provides longterm, maintenancefree operation. Our CLube technology maintains the lubrication performance for an extended period of time, reducing lubrication schedules and the time it takes to manage them. Since CLube is built into the small Linear Way U, it is lightweight and compact with the same outside dimensions. Stainless Steel Stainless steel types, with excellent corrosion resistance, are also available. They are ideal for use in clean rooms for medical equipment, various disc readers and semiconductor manufacturing devices.

Interchange specifications are available. Since the slide unit and track rail dimensions are separate, each can be individually added or exchanged. Slide units include two flange types with different mounting directions and three narrow block types with different heights and mounting directions. Length of Slide Unit Available types include short type, with the same crosssection as the standard type, highrigidity long type and extrahigh rigidity long type. Stainless Steel Stainless steel types, with excellent corrosion resistance, are also available. They are ideal for use in clean rooms for medical equipment, various disc readers and semiconductor manufacturing devices. Ultra Seal Specification The ultra seal specification provides excellent dust prevention performance thanks to a combination of the dedicated track rail finished with an overall ground finish, and the special shape of the end seal and under seal on the slide unit.

Interchange specifications are available. Since the slide unit and track rail dimensions are separate, each can be individually added or exchanged. Lower, narrower, shorter...more compact in every aspect. Flange Type and Block Type Slide units include two flange types with different mounting directions and three narrow block types. Length of Slide Unit Available types include a short type, with the same crosssection as the standard type, and a highrigidity long type. Stainless Steel Stainless steel types, with excellent corrosion resistance, are also available. They are ideal for use in clean rooms for medical equipment, various disc readers and semiconductor manufacturing devices.

The IKO Miniature Linear Bushing is an extremely small linear motion rolling guide with a shaft diameter of 3 to 5 mm that performs endless linear motion in the axial direction while making rolling contact with the shaft. Cage, steel balls and stop ring are compactly built in the external cylinder, allowing high feed accuracy to be obtained. Since the steel balls are accurately guided by the cage, stable linear motion can be obtained with small frictional resistance. Compact Design The ultrasmall size allows for compact machine and device design. Wide Variation In addition to the standard type, the highrigidity long type has been serialized and can be selected according to the application. Stainless Steel Stainless steel types are also available, with excellent corrosion resistance and ideal for use in clean rooms, such as in medical equipment, various disc readers and semiconductor manufacturing devices.

The IKO Linear Bushing is a highprecision linear motion rolling guide that performs endless linear motion in the axial direction while making rolling contact with the shaft. Cage, steel balls, and the like are built compactly in the external cylinder. Models are available in abundant sizes and can be selected according to the application. Since the steel balls are accurately guided by the cage, stable linear motion can be obtained with small frictional resistance. Simple Replacement for Rolling Guide With the shaft used as the raceway, guiding parts using conventional bushings can be changed to rolling guides without major design changes. Wide Variation For each dimensional series, standard, adjustable clearance, and open types are available with and without seals, which can be selected according to the application. Stainless Steel Stainless steel types are also available, with excellent corrosion resistance and ideal for use in clean rooms, such as in medical equipment

We have been manufacturing UP machines / components and beam delivery systems for over 20 years.Benefit from our experience and let us do your demanding assembly or adjustment work.Assembly / adjustment of optical systemsAssembly / adjustment of mechanical precision systems.cleaning.Clean room assembly.Functional test.

ISO 14644-1 certified cleanroom with class 8 air cleanliness constructed by market-leading air system and cleanroom suppliers. We offer manufacturing of medical plastic bottles/components to packaging without human contact.

Pressteck has all standard sizes of MDI containers in its portfolio: 10ml, 14ml, 17ml and 19ml. If you need other sizes due to individual requirements, we are happy to offer these as well. Pressteck has all standard sizes of MDI containers in its portfolio: 10ml, 14ml, 17ml and 19ml. If you need other sizes due to individual requirements, we will be happy to offer you these as well. Depending on the medication and the propellant (CFC or HFA), different materials are used. We produce our containers from aluminium and stainless steel. While stainless steel containers are usually used uncoated, aluminium containers can also be offered in a coated version. Our containers are used as primary packaging for the administration of aerosol medication by inhaler. Patients worldwide use MDI (metered-dose inhalers) to treat respiratory diseases such as asthma and COPD.

PEKUWhite - Our low-particle cleanroom films and cleanroom bags, tuned to your needs in the pharmaceutical, medicals, laboratory sector. The cleanroom packaging fulfils the highest quality standards.

The Multilift II clean has now been added to the range. It has been deliberately developed for use in the clean room. A special shroud for the DC motor with brushes of the lifting column means discharge of particles is kept to a minimum. To verify its suitability for use in clean rooms, the Fraunhofer Institute for Manufacturing Engineering and Automation IPA carried out a particle emissions test as per DIN EN ISO 14644-1 and certified the lifting column for use in clean rooms up to a globally valid class 4.

The sampling bag SteriBag Cleanroom with double packaging can be placed directly in the clean room. 25 sample bags are placed in double secondary packaging. They can be removed one after the other and are therefore ideally suited for introducing into the clean room. Then the sterile bags can be used directly in the clean room. SteriBag Cleanroom is sterile inside and outside. This guarantees contamination-free storage and transport of solid, semi-solid and liquid media. The sample bag is perfect for use in chemical and pharmaceutical applications. The disposable sample bag has a labelling field, saves space and is also easy to transport. The large bag opening makes it easy to pour in the sample.

We offer high-quality assembly of semi-finished goods or ready for sale final products with packaging. Assembly conducted within or outside clean room.

Instead of air, we use pure mechanics. Bottles are turned and aligned with the help of a wheel. You benefit from low-noise and energy-saving processes. High performance and clean room suitability are convincing.

Niro Präzisionstechnik specializes in the manual mechanical processing and processing of thin stainless steel sheets up to 4 mm. Our specialty are funnels, composite shapes, reductions and transitions, for example from round to square. We only process non-rusting materials such as V2A and V4A stainless steel, titanium alloys and aluminum. Our production conditions allow the manufacture of products for clean room applications such as those used in the pharmaceutical industry, medical technology and in the food industry. Funnels and reducers from Ø 70 - 900 mm invisibly ground weld seams carefully smoothed transitions to avoid product buildup suitable for clean room applications uniform wall thicknesses free of tension and distortion

Disposable funnel for reliable filling of liquids, ideal for filling bottles and other containers with a narrow filler opening. The disposable funnel ensures no loss when transferring liquid samples or free-flowing solids. That makes this practical and hygenic pouring aid a helpful accessory for sampling or in laboratories. Clean room produced funnel with suspension eye and venting fins for ventilation to ensure uniform flow while pouring. The disposable funnel for liquids is ideal for use in laboratories and clean rooms or for sampling. It can be used in pharmaceuticals, chemistry and cosmetics and the food and animal feed industries, as well as all areas where special purity is important.

The SteriPlast® sample spoon made of polystyrene is produced in our clean room of class 7 (10,000), individually packaged for disposable use and then sterilised by gamma rays. The sample spoon is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and is ideal for sampling powders, granulates and fluids.

The SteriPlast® scraper, made of polystyrene, is produced in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. Sturdy and convenient scraper for disposable use. The scraper is suitable for scraping off, smoothing or cleaning as well as removing residue.

Franke FDE linear guides are equipped with lubricant-free, high-quality needle bearings and are made almost entirely of lightweight aluminum. They are suitable for linear motion tasks in almost all industries, especially for use in food production or in clean rooms. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly

Franke FDE linear guides are equipped with lubricant-free, high-quality needle bearings and are made almost entirely of lightweight aluminum. They are suitable for linear motion tasks in almost all industries, especially for use in food production or in clean rooms. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.