Clean rooms - Import export

Cleanroom bags and films - low-particle cleanroom bags and cleanroom films for research, pharmaceuticals, medicals Highest quality standards according to DIN EN ISO 14644, ISO 7, ISO 5 are fulfilled.

This high-end lift truck adhesive mat for cleanrooms and hygienic areas is a high-performance, antimicrobial mat or floor covering for walking on and light vehicles, such as lift trucks. This high-end lift truck adhesive mat for cleanrooms and hygienic areas is a high-performance, antimicrobial mat or floor covering for walking on and light vehicles, such as lift trucks. Reduced particle counts on the floor (up to 99.9%) and airborne particles (up to 75%) in critical areas.

Pre-assembled assemblies for the clean room A kit consisting of parts that we have cleaned very finely is put together appropriately for clean room conditions and packed airtight. In this way, the assemblies can be brought directly to the appropriate production site without having to be unpacked or cleaned beforehand.

flexible coating as surface protection for concrete floor, decorative coating

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of...

Our production is done in specifically equipped rooms, to rule out the possibility of product contamination from the outside. This includes, for example: special access authorisation, airtight walls and ceilings, windows that cannot be opened, air supply to the rooms being filtered, higher inside air pressure in relation to the outside air, insect lamps to prevent contamination with insects, mandatory protective clothing, shoe covers, gloves and hair covers, written authorisation with documentation for all work or events taking place in the rooms, such as cleaning, conversions, malfunctions. We have specialised in the particular needs of the pharmaceutical, food and health industries. All production takes place under clean room conditions and in compliance with the highest hygiene standards. Some sections are FDA-approved. Food additives are processed in accordance with the HACCP principles and in compliance with the European food hygiene directives and are prepared for dispatch.

We have been manufacturing UP machines / components and beam delivery systems for over 20 years.Benefit from our experience and let us do your demanding assembly or adjustment work.Assembly / adjustment of optical systemsAssembly / adjustment of mechanical precision systems.cleaning.Clean room assembly.Functional test.

Pressteck is one of the world's leading specialists for deep-drawn individual parts on transfer presses and their processing into assemblies. In this non-cutting tension-pressure process, we produce hollow parts from a metal strip in several stages, which can be aluminium, stainless steel, copper or brass, among others. Compared to other processes, deep drawing has decisive advantages: Material consumption and production costs are lower, and at the same time the strength of the components is higher. We are highly innovative and optimise deep drawing technology beyond what is currently possible. We manufacture your individual component from coiled sheet metal and master demanding geometries and high degrees of forming.

Pressteck has all standard sizes of MDI containers in its portfolio: 10ml, 14ml, 17ml and 19ml. If you need other sizes due to individual requirements, we are happy to offer these as well. Pressteck has all standard sizes of MDI containers in its portfolio: 10ml, 14ml, 17ml and 19ml. If you need other sizes due to individual requirements, we will be happy to offer you these as well. Depending on the medication and the propellant (CFC or HFA), different materials are used. We produce our containers from aluminium and stainless steel. While stainless steel containers are usually used uncoated, aluminium containers can also be offered in a coated version. Our containers are used as primary packaging for the administration of aerosol medication by inhaler. Patients worldwide use MDI (metered-dose inhalers) to treat respiratory diseases such as asthma and COPD.

PEKUWhite - Our low-particle cleanroom films and cleanroom bags, tuned to your needs in the pharmaceutical, medicals, laboratory sector. The cleanroom packaging fulfils the highest quality standards.

The Multilift II clean has now been added to the range. It has been deliberately developed for use in the clean room. A special shroud for the DC motor with brushes of the lifting column means discharge of particles is kept to a minimum. To verify its suitability for use in clean rooms, the Fraunhofer Institute for Manufacturing Engineering and Automation IPA carried out a particle emissions test as per DIN EN ISO 14644-1 and certified the lifting column for use in clean rooms up to a globally valid class 4.

The sampling bag SteriBag Cleanroom with double packaging can be placed directly in the clean room. 25 sample bags are placed in double secondary packaging. They can be removed one after the other and are therefore ideally suited for introducing into the clean room. Then the sterile bags can be used directly in the clean room. SteriBag Cleanroom is sterile inside and outside. This guarantees contamination-free storage and transport of solid, semi-solid and liquid media. The sample bag is perfect for use in chemical and pharmaceutical applications. The disposable sample bag has a labelling field, saves space and is also easy to transport. The large bag opening makes it easy to pour in the sample.

Instead of air, we use pure mechanics. Bottles are turned and aligned with the help of a wheel. You benefit from low-noise and energy-saving processes. High performance and clean room suitability are convincing.

Niro Präzisionstechnik specializes in the manual mechanical processing and processing of thin stainless steel sheets up to 4 mm. Our specialty are funnels, composite shapes, reductions and transitions, for example from round to square. We only process non-rusting materials such as V2A and V4A stainless steel, titanium alloys and aluminum. Our production conditions allow the manufacture of products for clean room applications such as those used in the pharmaceutical industry, medical technology and in the food industry. Funnels and reducers from Ø 70 - 900 mm invisibly ground weld seams carefully smoothed transitions to avoid product buildup suitable for clean room applications uniform wall thicknesses free of tension and distortion

Franke FDE linear guides are equipped with lubricant-free, high-quality needle bearings and are made almost entirely of lightweight aluminum. They are suitable for linear motion tasks in almost all industries, especially for use in food production or in clean rooms. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly

Disposable funnel for reliable filling of liquids, ideal for filling bottles and other containers with a narrow filler opening. The disposable funnel ensures no loss when transferring liquid samples or free-flowing solids. That makes this practical and hygenic pouring aid a helpful accessory for sampling or in laboratories. Clean room produced funnel with suspension eye and venting fins for ventilation to ensure uniform flow while pouring. The disposable funnel for liquids is ideal for use in laboratories and clean rooms or for sampling. It can be used in pharmaceuticals, chemistry and cosmetics and the food and animal feed industries, as well as all areas where special purity is important.

Franke FDE linear guides are equipped with lubricant-free, high-quality needle bearings and are made almost entirely of lightweight aluminum. They are suitable for linear motion tasks in almost all industries, especially for use in food production or in clean rooms. Rail elements can be manufactured in lengths from 200 mm to 4000 mm and can be coupled endlessly.

The SteriPlast® sample spoon made of polystyrene is produced in our clean room of class 7 (10,000), individually packaged for disposable use and then sterilised by gamma rays. The sample spoon is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and is ideal for sampling powders, granulates and fluids.

The SteriPlast® scraper, made of polystyrene, is produced in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. Sturdy and convenient scraper for disposable use. The scraper is suitable for scraping off, smoothing or cleaning as well as removing residue.

All connections are welded while avoiding the inclusion of oxygen, and the weld seams are made invisible through careful polishing. The workpieces are machined free of tension and distortion with uniform wall thicknesses. In the surface finish, structures of any type and surface roughness up to an area of ​​1000 x 2000 mm are possible. Our production conditions also allow the manufacture of products for clean room applications such as those required for the special hygiene requirements in the pharmaceutical industry, medical technology, the food industry and in the clinical sector. Machine housing Control cabinets Manufacturing facilities Aperture Disguises Covers Support frame

The high-quality scraper is suitable for scraping off, smoothing, cleaning, levelling out and also for removing strong adhesive, sticky substances or dried up media. The edge of the corrosion-resistant stainless steel scraper is ideal for blending and portioning viscous media. The smooth, seamless and sturdy surface ensures cleaning without difficulty and meets hygenic requirements. The scraper makes a suitable implement for use in laboratories, production and clean rooms. It is ideal for use under rugged conditions in pharmaceuticals, chemistry, cosmetics, animal feed and food & beverage.

Special and flame retardant Just like ICS, ICS-ETFE is also suitable for coating stainless steel process and utility pipework, for example. As a special, flame-resistant interior coating, this is particularily suitable for the coating of exhaust air pipework, for example, in factories in the chip, solar cell and fibre optics industries. ICS is FM-approved - each construction part is marked separately with the FM specification. This coating is also tested according to the American safety standard Factory Mutual Research 4910 and suitable for use in clean rooms.

The LaboPlast® disposable spatula made of polystyrene is produced and assembled in our clean room of class 7 (10,000) and individually packaged for disposable use. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into containers such as paper or plastic sacks. The disposable spatula is ideal for sampling powders, granulates and pastes. The spatula with transparent sealing sleeve can be closed again immediately after sampling and the exclusion of contamination can be safeguarded for the sample taken.

Detectable SteriPlast® scoops, made of blue polystyrene, are produced (except for the 1000 ml scoop) and assembled in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. Detectable scoops are ideal for powders, granulates and pastes. These scoops, spatulas, spoons and scrapers are not only coloured blue but also have a special additive in the material that makes them visible to metal detectors or X rays. These products can therefore be rejected with standard systems for checking for foreign objects, even though they are made of plastic.

The spoon spatula is a double spatula with a 0.5 ml spoon and a 17 mm spatula blade, total length 178 mm. The spoon spatula has many different uses in labs – as a sampling spoon, for measuring or transferring small amounts, as a scraper or for mixing and stirring. Specially designed for disposable use, resistant to chemicals and corrosion-proof. Clean room manufactured, available either in a large package with 100 pieces or 100 pieces packaged individually and sterilised by gamma rays.

Double scoop spatula with rounded ends, content 1.0 and 0.25 ml, total length 180 mm. The micro spatula can be used to sample, transfer or process small amounts of chemicals, powders, granulates, pastes, creams or liquids. The sturdy and convenient centre handle facilitates precise work. Clean room manufactured, available either in a large package with 100 pieces or 100 pieces packaged individually and sterilised by gamma rays.

New interferometer sensors with different designs and properties are available for the integration in demanding environments. Due to its 90° beam path, the IMP-DS0.5/90/VAC can also be mounted in low installation spaces. The new IMP-DS1/VAC miniature sensor is one of the smallest optical sensors from Micro-Epsilon. With a diameter of 4 mm and an integrated cable, the sensor can also be used in extremely confined installation spaces. Sensors and cables can be used both in the clean room and in a vacuum.

The light plastic forceps for single use allow for fatigue-free work. The clean room-manufactured lab assistants meet the highest standards and prevent cross-contamination or impurities in the sample being examined. The lab tweezers are suitable for chemical, pharmaceutical or cosmetic applications as well as the food industry and scientific uses. Pointed/angled shape The disposable forceps have fine, smooth, curved gripping tips. Different materials can be held and processed reliably with the pointed ends. Pointed shape The anatomical forceps have a straight tip, fluted on the inside. This makes it possible to grip sensitive materials reliably. Broad tip shape The disposable forceps have ends with a broad tip. The broad tip is smooth and blunt. It prevents the material from being damaged when it is gripped.

These plastic pallets from bekuplast are made of high-quality raw materials. They are stable, resilient, hygienic, and durable. The product range of bekuplast includes industrial pallets, Euro pallets, heavy-duty pallets, clean room pallets, ESD conductive plastic pallets, and other special solutions. bekuplast offers a wide range of pallets for light-, medium-, or heavy-duty applications, depending on the required load capacity. Depending on the model, you also have your choice among different base coverings and anti-slip edges. Of course, you can also order our pallets in special colours and with individual labelling such as screen printing or engraving. We would be happy to advise you! Plastic Pallets vs. Wooden Pallets There are many reasons for the use of plastic pallets: Plastic pallets have a considerably longer service life than wooden pallets. They can be used many more times over and therefore need to be replaced less frequently. In contrast to wooden pallets, plastic...