Direct current motors - Import export

"All our motors have a square frame with a compact and robust construction. A modular design allows a wide flexibility of assembly forms. The motors have a laminated housing, which allows high currents in transit. An insulation system with a higher class than F guarantees a longer life of the motors. They are suitable for a wide range of applications. The motors comply with the international requirements 34-1. The following conditions apply: continuous duty S1 and a DC power supply fully controlled by the drive. Features: - Depending on the application, the motors can be equipped with IC0666 air exchanger or ICW81 air water exchanger. - Predisposition for encoder or tachometric dynamo mounting 20 or 40 or 60V/1000T - On request, the motors can be built to measure to go in place of the existing motors - IP23 protection - Heating class F - In 12-24-48-220-440V - Cast iron - Up to 800kW - B3/ B35/ B5 - Insulation class H - Cooling IC06 - 100 - 355 size"

"We also offer used engines directly from our stock. These motors are a fast and efficient solution which allows us to help you out by offering short delays for sale or rent with or without purchase option and this at an extremely interesting price. These motors with cages, rings or direct current are revised and tested in our workshops to ensure you an optimal service. They are delivered with a 12 months warranty. Our stock offers used motors with power ranging from 15kW to 5MW. Characteristics: - From 15kW to 5MW - With or without purchase option - 12 months warranty"

- Simple automation directly using the control system without software and/or PC - Operation with limit switch or via power consumption - Left/right operation and speed control directly on the housing - Option for external switches/joysticks - Various modes of operation, such as tip operation and start to finish (semi-automatic) - Various adjustable acceleration ramps - Power supply via 24V/2.5A

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

Type MR - roller bearing mounted slide /Typ MS - dovetail slides Positioning accuracy: 0,001 - 0,1 mm according to the spindle used and the feedback system Drive: Stepping or direct-current motors

Two-stage gear drive with solid shaft Gear Type: SN6 Motor Type: Three-Phase and Direct Current Mounting: Motor Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN9BH Motor Type: Three-Phase and Direct Current Mounting: Motor Foot / Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN5 Motor Type: Three-Phase and Direct Current Mounting: Motor Foot Ausgangswelle: solid shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with solid shaft Gear Type: SN9BN Motor Type: Three-Phase and Direct Current Mounting: Motor Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with solid shaft Gear Type: SN4B Motor Type: Three-Phase and Direct Current Mounting: Motor Foot Ausgangswelle: Solid Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

The right drive solution for every challenge: Experience our new modular worm gear, which offers a variety of mounting options and can therefore be adapted to all your needs. With the preconfigured basic components based on our many years of experience, you can implement your drive task particulary quickly. Should your application make special demands on the drive unit, we naturally offer you competent advice and will be happy to assist you in configuring your drive unit Basic version: — Aluminium casting housing — Hollow shaft Ø15 — Ratios: 7; 10; 20; 24; 30; 50; 55 — Permissible torques: 11-13 Nm Customising - Optional equipment: — Plug shaft on both sides Ø10x30mm gen. 5x20 — One-sided plug shaft Ø10x30mm gen. 4x20 — Big flange Ø100/Ø80/Ø60mm — Complete drive units as three-phase, direct current or 24VDC permanent magnet motors

PMDC Motors or permanent magnet direct current motors are a form of brushed DC motor. Brush is used to introduce an extraction voltage and a current. It is the most significant part of the motor. This Eccentric shaft dc motor with gear reducer is designed for car or other vehicle automation.

Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. Three-Phase BLDC (Brushless Direct Current Motor) comes in smaller size with advantages of energy-saving, and high efficiency. •High-voltage driving to reduce transfer loses •Sensor-less phase detected •Low phase switching noise •Sine-wave control. •Support both of linear and digital (PWM) control signal •High efficiency for power saving. voltage 12v 24v rated speed 6600 7700 RPM rated torque 20.78 28.92 mNm output 14.36 23.25 W EFF 62 74 %

Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. Three-Phase BLDC (Brushless Direct Current Motor) comes in smaller size with advantages of energy-saving, and high efficiency. •High-voltage driving to reduce transfer loses •Sensor-less phase detected •Low phase switching noise •Sine-wave control. •Support both of linear and digital (PWM) control signal •High efficiency for power saving. voltage 12v 12v 12v 24v rated speed 2250 10700 8800 5100 RPM rated torque 6.13 13.7 11.4 8.12 mNm output 1.4 15.46 4.37 10.63 W EFF 55 76 70 75 %

High-torque electric motors of types 2MTA, 3MTA, 4MTA, 4MTB, 5MT are designed for feeding mechanisms of CNC machine tools, robots, trans-manipulators and other mechanisms. Electric motors of the MT series have the following typical designations: - 2MTA: 2MTA-C, 2MTA-P, 2MTA-K, 2MTA-CP, 2MTA-CK; - 3MTA: 3MTA-C, 3MTA-P, 3MTA-K, 3MTA-CP, 3MTA-CK; - 4MTA: 4MTA-C, 4MTA-P, 4MTA-K, 4MTA-CP, 4MTA-CK; - 4MTB: 4MTB-C, 4MTB-P, 4MTB-K, 4MTB-CP, 4MTB-CK; - 5MT: 5MT-C, 5MT-P, 5MT-K, 5MT-CP, 5MT-CK. Decoding of type designations on the example of “4MTA-CPK” where: “4” - symbol of the moment; "M" is the engine; "T" - a series; “A” - modification by moment; "C" - electromagnetic brake; "P" - resolver with multiplier; "K" - photoelectric raster converter (pulse encoder, encoder). All electric motors of types 2MTA, 3MTA, 4MTA, 4MTB, 5MT have a degree of protection IP-44 and are equipped with a four-pole tachogenerator of direct current 4P (20V / 1000min-1).