Fixing material - Import export

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

STANLEY BOSTITCH PNEUMATIC STAPLERS MOD. S2638-2-E and S2650-2-E for special Wide Crown staples, with wide shoulder (mm. 25). New pneumatic staplers for fixing cardboard boxes to pallets and for packaging in which it is necessary to fix protective material (tar paper, polythene, polystyrene, etc.). Equipped with 2 start modes - sequential and contact that make them very versatile. The staplers are also equipped with the patented "DIAL-A-DEPTH" device which ensures precise control over the embedding depth of the stitch. All staplers are equipped with a shaped handle, a magnesium body, sequential safety, a belt hook, dust and splinter protection and a system for easy removal of the stitch. Available models: - S2638-2-E pneumatic stapler for staples with length from 13 to 38 mm - S2650-2-E pneumatic stapler for staples with length from 25 to 50 mm Also available in S2638/650-2-E BL models equipped with a long arm to fix the cardboard in the bottom of the case

Smart Slide Set guide rails, full extension Lock Fix, nominal length 350 mm, material: steel

The Powder Sampler Mini is a stainless steel sampler for small quantities. When the button is pressed, a sampling rod enters the sample material and retracts when released. In this way, a fixed amount of sample material is enclosed in the sample notch of the rod and removed. The sampler precisely collects 0.01 ml, 0.05 ml and 0.1 ml sample volumes, depending on the version. With an insertion depth of up to 300 mm, multiple target point samples can be collected at different depths. The small-volume powder sampler is made of high-quality stainless steel 1.4404/1.4571 (316L/316Ti). The Mini powder sampler is used for sampling powdery products from small containers, sacks, drums or open containers. Primarily in the pharmaceutical, medical products and biotechnology sectors, e.g. for testing raw materials, active ingredients and excipients.

New cordless stapler powered by lithium-ion battery. Excellent for jobs requiring freedom of movement. The battery offers high performance (7.2V) and is characterized by very rapid charging. The high quality construction ensures a long life to the instrument and is perfect for everyday use in case of fixing of paddings, textile materials, leather or thin wood. It has a safety system to prevents accidental shots and a "see-through" indicator for an efficient charging. The long duration power supply system (1300 shots), without constraints of pipes or cables makes it extremely versatile, practical and suitable for anyfixing work. Dual magazine for staples and nails. Ergonomic design with "soft grip" handle and prefect balance. The stapler Rapid BTX530 uses staples series 53 length from 6-8-10-12-14 mm, with total width of 11,40 mm and brads series 8 of length 15 mm.

- Aluminium clothes rail made of oval profile 3 non-twisting, non-tilting metal hooks - Material hooks fixed at the side, position can be changed as needed - Extra-large compartments provide sufficient storage space for equipment - Perforated base plate guarantees that moisture to drip away Valuables compartment: The compartment with inserting slot allows valuables to be stored quickly even with the door locked. The rubber-coated base softens impact and prevents scratches. Helmet compartment: Helmets are properly stored in the spacious helmet compartment. The gear locker can be equipped with either the ergonomic or flexible helmet holder. Alternatively, the helmet holder can be mounted on top of the cabinet creating extra storage space for equipment or large protective helmets. Variants: - number of compartments: 1 or 2 - Light grey, Flame red and Gentian blue are included, further on demand. - different locks

- Aluminium clothes rail made of oval profile with 3 non-twisting, non-tilting metal hooks - Material hooks fixed at the side, position can be changed as needed - Private compartment door with slot for personal documents and letters - Prepared for wall assembly easy to anchor and align Helmet compartment: The cut-out in the helmet compartment shelf guarantees that the helmet can be stored without buckling the neck protector. In addition, the recessed shelf makes it easier to store large helmets. Ventilation holes enable to quick drying. Private compartment: Available in width: 20 cm; 30 cm; 35 cm; 40 cm. Turnout gear and private clothing are stored separately. While the open compartment makes the quick access storage of turnout gear possible, the lockable compartment provides safe storage for private belongings. Colour of body and doors: Light grey, Flame red and Gentian blue are included, further on demand.. Locks The compartment can be equipped with different locks.

Toothed belt brushes from Kullen complement the belt brush range and offer one advantage in the feeding technique which the others do not: they can be set to a measurable cycle time. We only use standard toothed belts made of polyurethane with especially welded studs for fixing the fill material. The toothed belts are resistant against humidity, oils, greases and most chemicals. They can be used at temperatures between -15°C up to 80°C. Our experience shows that the required variations of toothed belt brushes are specific according to the customer's application and thus are normally produced ready to be installed as an endless unit. This brush type is available in common widths (KB) of standard toothed belts divided in T5, T10 and T20. The belt length depends on your requirements. You should always inform us about the inside belt length. The maximum belt speed is 6 m/s. Mainly natural hairs and bristles, plant fibres and synthetic bristles (PP, PA, etc.) are used, so all kinds of...

A very interesting aspect of our STS-spiral coils is the type with inverted fill material that is used, for instance, for polishing, descaling or removal of corrosion off rods or wires in a continuous operation. With an outside diameter of only 20 mm it is possible to reach an inner diameter of zero. Offering an enormous choice of dimensions and fill material qualities this brush has almost unlimited applications. The pioneering of this brush type has left its mark and shows in every detail of this brush. The diagram below shows how the STS coil is constructed: the fill material is fixed with a locking wire inside the backing tape. Available backing tapes We manufacture our STS-spiral brushes in eight different coil widths (WB) from 2,5 - 13,5 mm. As material we use mild steel, stainless steel (1.4301 or 1.4571) or brass. Variety The STS-spiral coil offers an enormous choice of dimensions in fill material, fill configuration, fill density.

The STS-spiral coil is the only brush type that can be produced with very small diameters starting at an overall diameter of 17 mm. Offering an enormous choice of dimensions and fill material qualities this brush has almost unlimited applications in light or medium work. The long period of development of this brush type has left its mark and appears in every detail of the brush. The diagram below shows how the STS coil is constructed: the fill material is fixed with a locking wire inside the backing tape. Available backing tapes We manufacture the STS-brush in eight different coil widths (WB) from 2.5 mm to 13.5 mm. As material we use mild steel, stainless steel (1.4301, 1.4571) or brass. STS-spiral coils can be supplied for self installation, as well as a complete roller brush with shaft. Variety The STS-spiral brush offering an enormous choice of fill material, fill arrangements and fill densities. Depending on the fill material and dimension we can also increase the density by...

- Aluminium clothes rail made of oval profile 3 non-twisting, non-tilting metal hooks - Material hooks fixed at the side position can be changed as needed - Prepared for wall assembly, easy to anchor and align - Perforated base plate guarantees that moisture to drip away Valuables compartment: The open storage shelf can be replaced by a lockable valuables compartment if needed. The compartment door has a slot for letters and documents. Integrated rubber pads ensure quiet closure of the door. Helmet holder: The gear locker is equipped with the ergonomic helmet holder as standard. An alternative accessory is our flexible helmet holder. Thanks to the round shape, the helmet is stored with care, as though on your head. Good ventilation is guaranteed. Variants: - number of compartments: 1; 2; 3 - compartment width: 30 cm; 40 cm; 50 cm - Light grey, Flame red and Gentian blue are included, further on demand. - different locks

Volumetric cup fillers enable the volumetric dosing of granular products. They can be fitted to all models of vertical form fill and seal machines and are offered in two series: 6 cups or 12 cups. Both models are equipped with a feed hopper with controlled outlet, a product level sensor, a series of cups made of food-grade material, a fixed lower cup carrier and, in automatic mode, a height-adjustable upper cup carrier with cup level sensor. The product is unloaded by gravity at the inlet of the packaging machine and, for fine products, the unloading system is equipped with a flap that prevents the product from spilling.

Product Numbers： PEAG-0 Product description：PE Nagaimo net 100% PE raw material INTRODUCTION: PE Nagaimo net ( ナガイモネツト 角目 ) *used horizontally, the nets become a fairly effective guide to space-keeping implanting, successive layers can be fixed at brackets with the continuing growth of plants *simple in structure, high quality, clean, economical, harmless to leave and quite easy to fix. *Material: 100% PE raw material *Twine: 6ply, 9ply, 12ply *Mesh: 12cm,18cm,20cm,21cm,24cmsquare mesh *Color: White *Size: 4step x75M, 6step x100M, 7step x185M, 8step x275M, 9step x320M, 11step x 540M and etc. *Package: folded and put into a plastic bag with customer’s label; Outer package with PP woven bag or export standard carton *Note: There are many different sizes and requirement for Nagaimo net, please supply your detailed requirements when you make the order.

These rack and pinion hoists with steel segment masts have earned their good reputation over the years being a reliable partner for construction workers. Their spacious load platforms offer enough space for two wheelbarrows or large pallets as well as fixing devices for bulky construction materials. The steel mast system allows for easy assembly from the platform up to a height of 100m. Safe unloading of the transported materials is granted by the platform's being able to be turned by 90°. Loading at the base unit is carried out parallel to the building. This can be very space saving and a decisive feature on narrow construction sites! A patented mono-axis trailer for transporting and automatically putting down/ loading the hoist is offered as accessory.

These rack and pinion hoists with steel segment masts have earned their good reputation over the years being a reliable partner for construction workers. Their spacious load platforms offer enough space for two wheelbarrows or large pallets as well as fixing devices for bulky construction materials. The steel mast system allows for easy assembly from the platform up to a height of 100 m. Safe unloading of the transported materials is granted by the platform's being able to be turned by 90°. Loading at the base unit is carried out parallel to the building. This can be very space saving and a decisive feature on narrow construction sites! A patented mono-axis trailer for transporting and automatically putting down/ loading the hoist is offered as accessory. The GEDA 500 Z Duo is available with load-through and rotable platform.

Adjustable feet in over 20,000 variations — fixed adjustable foot — hinged adjustable foot function: — screw-on (with screw-on hole/with extension arm/through accessories: floor mounting for trapeze plate) — levelable — swiveling — anti-slip (by accessories: anti-slip plate made of thermoplastic elastomer) — EDS-capable Plate shape and size: — Round — Trapezoidal shape — Square — Diameter 20 mm to 120 mm other shapes on request Material plate: — Plastic PA, glass ball reinforced — steel, galvanized — zinc die casting — stainless steel other materials and surfaces on request Threaded rods for adjustable feet with/without ball head — swivel range 0° - 20° degrees — M5, M6, M8, M10, M12, M14, M16, M20, M24, M30 — Length: 20 - 300 mm — Alternative: ball head with internal thread — Material: galvanized steel, stainless steel Colors: black, silver, other colors on request

CNC Turning/Lathe machine is a machining/cutting tool which fixed and rotated the raw material rod on it's driving headstock, to remove the material by means of relative movement between various cutting tools and raw material rod. A CNC Turning/Lathe Machine can be combined with specific machining operations, such as turning, threading, boring, drilling, grooving, reaming, cutting, facing, parting, knurling, etc. A CNC Turning/Lathe Machine with computer numerical control(CNC) can be a powerful machine integrated with highly precision CNC control, automatic feeders, coolant systems, translation/rotary systems, etc. KOSMOS Industries Corporation mainly operated with highly precision Japan and Taiwan CNC Turning/Lathe Machining Center, such like Nomura, Star, Moriseiki, Miyano, Takisawa, Chiah Chyun, etc, basically generalized into Fixed Head and Sliding Head Turning/Lathe Machining Centers for various purpose.

The bald eagle is a proud bird. And predatory. Such a brooch will tell others about the serious intentions of the owner. The brooch is relevant for both men and women - it will emphasize the individual style and give confidence. Made of silver with elements of gilding, decorated with black and colorless cubic zirkonia. Clasp - pin. The pin is conveniently attached to any material, securely fixed and remains invisible.

Single hook in solid stainless steel (AISI 303), satin finished, for surface mounting. Concealed antitheft twopoint rosette wall mounting. Delivery includes fixing material. Dimensions Ø 45 x 36 mm

Waste bin in stainless steel (AISI 304) for surface mounting. Allstainless steel housing with rounded vertical corners. Visible surfaces satin finished and brushed. Equipped with removable fabric stand bag in polypropylene, washable. Capacity approx. 23 l. Delivery includes fixing material. Dimensions 298 x 448 x 170 mm

Toilet brush set in solid stainless steel (AISI 303), satin finished, for surface mounting. Concealed antitheft twopoint rosette wall mounting. Brush head replaceable, cup removable with internal stop bolt for optimum brushposition. Delivery includes fixing material. Dimensions 97 x 391 x 129 mm

Toilet roll holder in solid stainless steel (AISI 303), satin finished, for surface mounting. Concealed antitheft twopoint rosette wall mounting. Can be mounted pointing right or left. Delivery includes fixing material. Dimensions 135 x 110 x 66 mm

Selfclosing, flameretardant disposal flap with mounting frame in stainless steel (AISI 304) for undercounter mounting at the front side. Allstainless steel construction; visible surfaces satin finished and brushed. Delivery includes fixing material. Dimensions 298 x 148 x 10 mm

Waste bin in stainless steel (AISI 304) for surface mounting or floor installation. Allstainless steel housing; visible surfaces satin finished and brushed. Equipped with removable fabric stand bag in polypropylene, washable. Capacity approx. 60 l. Delivery includes fixing material. Dimensions 400 x 600 x 250 mm

Hygiene waste bin in stainless steel (AISI 304) for surface mounting. Allstainless steel housing; visible surfaces satin finished and brushed. Equipped with removable hygiene bin. Capacity approx. 4 l. Accessible through hinged lid. Delivery includes fixing material. Dimensions 202 x 250 x 115 mm

Waste bin in stainless steel (AISI 304) for surface mounting. Allstainless steel housing; visible surfaces satin finished and brushed. Equipped with removable fabric stand bag in polypropylene, washable. Capacity approx. 34 l. Delivery includes fixing material. Dimensions 298 x 598 x 190 mm

Waste bin in stainless steel (AISI 304) for surface mounting. Allstainless steel housing; visible surfaces satin finished and brushed. Equipped with removable fabric stand bag in polypropylene, washable. Capacity approx. 23 l. Delivery includes fixing material. Dimensions 298 x 448 x 170 mm

Paper towel dispenser in stainless steel (AISI 304) for surface mounting. Allstainless steel housing with rounded vertical corners, open at the top. Visible surfaces satin finished and brushed. Filling quantity approx. 500 paper towels. Inspection slot to indicate fill level. Refillable from the top. Delivery includes fixing material. Dimensions 298 x 298 x 120 mm

Paper towel dispenser in stainless steel (AISI 304) for surface mounting. Allstainless steel housing with rounded vertical corners. Visible surfaces satin finished and brushed. Filling quantity approx. 500 paper towels. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material. Dimensions 265 x 298 x 120 mm