Doors- industrial - Import export

First introduced in 1999, many innovative solutions were integrated into this machine to ensure absolute reliability and cuts of the highest quality. If you’re looking for fast and efficient production cycles and high quality cut panels made with an easy to use machine, SM 400 TA is the solution for you. To solve the problem of shrinking crystal (clear) PVC we developed a system for the just in time heat treatment with infrared light. After the treatment the crystal PVC will remain perfectly stable and can be integrated in products such as industrial doors, tents or terace covers without the danger of shrinkage, even when exposed to sunlight or cold. SM 400 TA installs a wide range of industrial cutting tools for the creation of top quality fabric panels. A selection of accessories make this machine the complete solution for your panel cutting requirements.

Cost-effective solution for fire-protected shaft walls - With peripheral lip seal (silicone) against smoke penetration - Quick and easy installation. Fire resistance on duct side and room side NF EN 1634-1 : +A1 : 2018 The inspection hatch is specially designed for installation on technical ducts with one of the requirements "external and internal heat load of the duct" and a fire resistance class EI 30. It offers a safe protection against the spread of fire from a room into the duct or counteracts it. The aluminium mounting frame is equipped with a fire protection strip. The cover of the inspection hatch is filled with DF fire protection plates and protected against the passage of smoke by a four-sided circumferential seal. The cover is secured on both sides by self-adjusting safety arms. These safety arms ensure that the cover stops every time the door is opened. The cover can be easily removed and replaced

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 90 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 90. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018 Fire dampers EI 120 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 120. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboard Tested for fire resistance from underneath (room side) NF EN 1634-1: +A1: 2018EN 1634-1: +A1: 2018 Fire dampers EI 60 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Frame made of aluminium profile bars connected by "Tox" connections - Intumescent gas, smoke and flame tight seal in case of fire - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards - Quick and easy installation The 60-minute ceiling fire dampers are designed for installation in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 60. They provide effective protection against fire progression from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms. The safety catching arms ensure that the lid is intercepted every time the hatch is opened. The lid is easy to remove and replace.

Frame made of aluminium profile bars connected by "Tox" connections - All-round EPDM lip seal - Restraint security - Hidden latches - Screwed GKF gypsum plasterboards Tested for fire resistance from underneath (room side) NF EN 1634-1 : +A1 : 2018 Fire dampers EI 30 are designed to be installed in false ceilings for self-contained fire protection, one of the requirements being "combustible load only on the room side" and the fire resistance class being EI 30. They provide effective protection against the progression of fire from the room into the false ceiling area. The integrated aluminium frame is equipped with a fire stop. The cover of the inspection hatch is fitted with a DF fire protection plate and protected against smoke entry by a versatile all-round seal. The cover is secured on both sides by automatic safety hooking arms.

Characteristics of high speed door Mavi-one Multi-purpose door Rolling type For industry or food industry (Stainless steel version) – LERPAC agreement EN 13241-1 safety Standard – EC Self supporting mill galvanised steel frame with polyester powder coated finish – No welding – Option Frame : stainless steel 304 L – Stainless steel 316 L Structure with Flexible track – Patent Unique Flexible track for Break-a-way Curtain with Reinsertion System Soft bottom edge technology -no more trouble with rigid bottom edge electronics Standard lintel spring : 350 mm Opening: 1 m/s – closing: 0.5 m/s Curtain M2 with composite made horizontal strengthening Maximum clear opening dimensions in mm: W 3250 x H 3250 Automatic door >> High speed door for inside application Brochure

Characteristics of high speed door Maviroll EN 13241-1 safety Standard – EC Opening: 1 m/s – closing: 0.5 m/s Self supporting mill galvanised steel frame with polyester powder coated finish Structure with Flexible track – Patent Unique Flexible track for Break-a-way Curtain with Automatic Reinsertion System without human intervention Structure with Flexible track – Patent Unique Flexible track for Break-a-way Curtain with Automatic Reinsertion System without human intervention Soft bottom edge technology – no more trouble with rigid bottom edge electronics Hood/top roll and motor cover Jamb inserted control panel Curtain 832 g/m² reinforced by composite tube Option : Double skin curtain with insulated foam for chilled room Option: battery back-up for automatic opening (power supply 230 V single phase for the door) Maximum clear opening dimensions in mm : W 4000 x H 4000 Automatic door >> High speed door for Industrial area, supermarket, food industry, chilled room.

Characteristics of high speed industrial door Mavifold EN 13241-1 safety Standard – EC Opening: 1 m/s – closing: 0.5 m/s Self supporting mill galvanised steel frame with polyester powder coated finish Structure with unique Flexible track – Patent The curtain can be released for the side guides in case of impact Soft bottom edge technology -no more trouble with rigid bottom edge electronics Wind resistance : 100 km/ Hood/top roll and motor cover Option : semi automatic counterweight in case of power failure Maximum clear opening dimensions in mm : W 6000 x H 6000 Automatic door >> high speed door for outside application Brochure

With NOVACLEAN ® brand, always in the context of innovation, AV Composites offers a new range of technical insulating aluminium sandwich panels as well as processes to build clean rooms: - Medical / Pharmaceutical - Microelectronics - Food Manufacturing Processes - Petrochemical - Precise Industry A new generation of doors and windows, dual-flush or semi-flush, complete the range NOVACLEAN ®.