Heads - Import export

We manufacture a wide range of vessel heads to works standards, both for construction purposes and as dished vessel heads in the form of torispherical heads, elliptical heads and caps for pressure applications. Applications are very varied – ranging from candleholders to pipe end-pieces or pressure vessels in equipment construction. And if a central hole is needed for connections, this can also be provided.

Our extrusion heads for blow molding meet the highest demands in terms of precision, availability, performance and ease of use. And They ensure your safe and cost-efficient production.

These are the dowel used in filtration system.

Application optimized read/write heads in the industry-standard design (up to IP69K with HF), allow for optimal integration into your application. Depending on the environmental conditions, read-write ranges of up to 1 m (HF) or several meters (UHF) are possible. The radio interface for read/write heads and data carriers is internationally standardized (ISO 15693 and ISO 18000-6c with HF at UHF).

Universal adapter piece for cameras on our articulated arms With standard ball joint for connection to camera thread 1/4" UNC, with cable feedthrough for camera cable or power supply. Cables can be laid through the articulated arm. Weight with spherical head: 100 g Weight without spherical head: 50 g Material: Adapter: Fine grade polyamide PA2200 Ball head: Alumiium Universal adapter piece for cameras on our articulated arms With standard ball joint for connection to camera thread 1/4" UNC, with cable feedthrough for camera cable or power supply. Cables can be laid through the articulated arm. Weight with spherical head: 100 g Weight without spherical head: 50 g Material: Adapter: Fine grade polyamide PA2200 Ball head: Alumiium

STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc

STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

head nut low and high type

With the TankMaster family, WOMA provides an especially wide application spectrum for all areas in which tanks and vessels of all types are to be cleaned in a highly efficient way. All systems have an end stop protection and can be fitted with various rotors and extension arms. This allows an enormous bandwidth of vessel sizes to be cleaned with an optimum area efficiency. Regardless of whether it be oils, greases, caking or deposits – simply nothing remains sticking here.

With the TankMaster family, WOMA provides an especially wide application spectrum for all areas in which tanks and vessels of all types are to be cleaned in a highly efficient way. All systems have an end stop protection and can be fitted with various rotors and extension arms. This allows an enormous bandwidth of vessel sizes to be cleaned with an optimum area efficiency. Regardless of whether it be oils, greases, caking or deposits – simply nothing remains sticking here.

With the TankMaster family, WOMA provides an especially wide application spectrum for all areas in which tanks and vessels of all types are to be cleaned in a highly efficient way. All systems have an end stop protection and can be fitted with various rotors and extension arms. This allows an enormous bandwidth of vessel sizes to be cleaned with an optimum area efficiency. Regardless of whether it be oils, greases, caking or deposits – simply nothing remains sticking here.

mushroom head screw with nylon patch on the thread

flat head screw with metric thread and hex socket

air regulation, needle valve, tube Ø19 mm, head Ø30 mm

Monitor swivel arms for ergonomic workstation design The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. This may be useful for carrying out set-up work on machinery for example, or if the monitor is having a disruptive impact on the working environment. There is also the option of expanding the support arm with two support tubes (twin version) to include a sturdy keyboard tray. The modular design of the RK swivel arm/support arm system allows for varied combination options and helps to adapt workstations to the most ergonomic arrangement. Different support arms, swivel arms and telescopic support arms are available, based on the load to be supported (monitor weight, torque support). The basic version has one support tube for loads of up to 10 kg , and the twin version has two support tubes for loads of up to 25 kg.

The extremely space-saving design of our screen changer allows a lot of creative freedom, both with new machines and in the case of retrofitting, since the structure of the extruder platform only needs to be adjusted a little. The screen changer is installed instead of a connection piece and can be equipped with a hydraulic or electric drive. The simplest way, however, is to use a cordless screwdriver, which makes changing bits a quick and easy endeavor. Screen changers are available for all common throughputs.

The perfect combination of head and complete extrusion is the heart of every blow molding machine - tailor-made for your product and adaptable to every machine. Our platforms guarantee the greatest possible security and user-friendliness for users.

Simply headed articles (screws and bolts) with diameters ranging from 1.5 to 6 mm and a length of up to 650 mm. Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

slotted mushroom head sleeve nut

flat head sleeve nut with hex socket

mushroom head sleeve nut with hex socket

countersunk head screw with square neck all sizes

Design and construction This Schulz ball caster / ball transfer unit consists of a casing, a top cover and a bearing cap as solid turned parts, a bearing ball and several support balls. To this ball caster is another casing which serves as a body for the spring. Prevent spring loaded ball casters Damage caused by shock loads. Dimensions Die Teilung wird ermittelt, indem man die kürzeste Kantenlänge des Fördergutes durch 3,5 dividiert.

Design and construction This Schulz ball caster / ball transfer unit consists of a casing, a top cover and a bearing cap as solid turned parts, a head flange, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.

Corner Head Connector Nr. 63

Head Hinge Part Nr. 45

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C bis +135°C • Good UV protection • Additional protection of the forehead due to the extended face shield • The face shield fits on the GFKKH100 headgear

Pre-stroke Pulverizing Relocation Penetration

Multilift II safety is yet another version of the Multilift II lifting column that is in the pipeline. RK Rose+Krieger has developed this column specially for overhead applications in media technology. Its uses include the correct positioning of projectors and monitors, whereby the lifting column is mounted upside down on the ceiling. A proprietary developed internal safety system prevents any accidental extension of the lifting column.