Tank cleaning - Import export

With the TankMaster family, WOMA provides an especially wide application spectrum for all areas in which tanks and vessels of all types are to be cleaned in a highly efficient way. All systems have an end stop protection and can be fitted with various rotors and extension arms. This allows an enormous bandwidth of vessel sizes to be cleaned with an optimum area efficiency. Regardless of whether it be oils, greases, caking or deposits – simply nothing remains sticking here.

With the TankMaster family, WOMA provides an especially wide application spectrum for all areas in which tanks and vessels of all types are to be cleaned in a highly efficient way. All systems have an end stop protection and can be fitted with various rotors and extension arms. This allows an enormous bandwidth of vessel sizes to be cleaned with an optimum area efficiency. Regardless of whether it be oils, greases, caking or deposits – simply nothing remains sticking here.

With the TankMaster family, WOMA provides an especially wide application spectrum for all areas in which tanks and vessels of all types are to be cleaned in a highly efficient way. All systems have an end stop protection and can be fitted with various rotors and extension arms. This allows an enormous bandwidth of vessel sizes to be cleaned with an optimum area efficiency. Regardless of whether it be oils, greases, caking or deposits – simply nothing remains sticking here.

In the cryogenic blasting process, an enrichment of rubber and plastic waste powder takes place due to fine abrasion during the treatment procedure. Thus the performance and processing time of the blasting-media will deteriorate and decrease its jet-energy. In our cryognic deflashing machines, the blasting-media is primary screened by the treatment drum perforation, however, after a long operating time the amount of rubber and plastic waste powder increases. In order to guarantee a constant, statistically secure and economic processing, this powder has to be removed periodically from the blasting-media. Our automatically working blasting-media recovery machine consists of a suction & drying system and a vibrating-screen unit. The used blasting-media has to be aspirated manually from the deflashing machine. The drying of the polluted wet and cold media takes place in the suction tank and the cleaning by screening with final separation into waste powder, waste media & re-usable media,

The application fields of the EcoMaster D 150Z Classic are the internal cleaning of tanks, containers or autoclaves, as well as the cleaning of large pipes. All Classic devices are fitted with robust, low maintenance and strong performance WOMA high pressure pumps. The compact design with stable frame construction enables easy usage in difficult areas. Fitted with crane hooks a simple transportation is guaranteed. Effortless regulation via optional manual pressure control or Dump Gun is possible and the large water tank ensures a calm water cycle. The Ecomaster Clasicseries brings a very good price performance ratio thanks to functional construction and proven mechanical components combined with low operational costs due to high service life, minimal maintenance costs and simple servicing.

The EcoMaster D 1502 Classic is ideally suited to the external cleaning of tanks up to the removal of dirt and corrosion, for example, as well as the removal of coating. All Classic devices are fitted with robust, low maintenance and strong performance WOMA high pressure pumps. The compact design with stable frame construction enables easy usage in difficult areas. Fitted with crane hooks a simple transportation is guaranteed. Effortless regulation via optional manual pressure control or Dump Gun is possible and the large water tank ensures a calm water cycle. The Ecomaster Clasicseries brings a very good price performance ratio thanks to functional construction and proven mechanical components combined with low operational costs due to high service life, minimal maintenance costs and simple servicing.

The EcoMaster D 2502 Classic is ideally suited to the external cleaning of tanks up to the removal of dirt and corrosion, for example, as well as the removal of coating. All Classic devices are fitted with robust, low maintenance and strong performance WOMA high pressure pumps. The compact design with stable frame construction enables easy usage in difficult areas. Fitted with crane hooks a simple transportation is guaranteed. Effortless regulation via optional manual pressure control or Dump Gun is possible and the large water tank ensures a calm water cycle. The Ecomaster Clasicseries brings a very good price performance ratio thanks to functional construction and proven mechanical components combined with low operational costs due to high service life, minimal maintenance costs and simple servicing.

Healthy air and wellness for the airwaysBreathe deeply and feel healthy! Thanks to a combination of refreshing humidification, permanent air purification and room air aromatization, the ultra-silent 3-in-1 ultrasonic humidifier B 7 E helps to improve the room air quality and maintain a healthy indoor climate with a wellness factor. The room humidity level is regulated fully automatically to a healthy comfort range (40 – 60 %), freed from dust, pollen and unpleasant odours in the integrated carbon air filter and, if desired, additionally aromatized with a subtle fragrance. The UV lamp in the water tank keeps the water clean and up to 97.9 % free from germs. Why is air improvement necessary at all? Whether we feel comfortable at home, sleep through the night or are receptive and productive at the workplace depends decisively on the quality of the room air.

BK 0.5 US/K – BK 2.5 US/K (0.5 – 2.5 m² filter area) Dry cake discharge No fleece consumption compact systems are used for cleaning contaminated cutting fluids in metal processing and rolling mill operations. Cleaned cutting fluids have longer lifespan, improve the surface quality of workpieces or rolled goods, and help dissipate heat at the processing or forming location. Advantages: Fully automatic operation Excellent filtration results without fleece consumption Minimal carryover of cutting fluid Dry cake discharge Low maintenance requirements Full-flow filtration Maximum lifespan of cutting fluid Option for emergency operation with fiber fleece The cleaned cutting fluid is supplied to the system pump (A) from the clean tank (B) of the processing machine (C). The contaminated cutting fluid is introduced into the dirt tank (E) of the folding belt filter system through the lifting stations. The internal processing of the system consists of two steps: “Filtration” and “Regeneration.”

Automatic Precoat Filter are used for the cleaning of contaminated cutting fluids in metal processing and rolling mill applications. Clean cutting fluids lead to longer tool life, improved surface quality of workpieces or rolled goods, and efficient heat dissipation at the processing or forming point. Advantages: Fully automatic operation Excellent filtration results Compact size Low maintenance requirements Full-flow filtration Dry cake discharge with minimal carryover of cutting fluid No fleece consumption Maximum lifespan of cutting fluid Operating Principle: The cleaned cutting fluid is supplied to the filter system pump (1) from the clean tank (2) of the processing machine. The contaminated cutting fluid is introduced into the dirt tank (3) of the cake filtration system through inlet channels or lifting stations. The internal processing of the system consists of four steps: “Cake Formation,” “Filtration,” “Regeneration,” and “Sludge Treatment.”

Plate Precoat Filter are used for the fine filtration of low-viscosity oils. This cost-effective filter is a compact device designed to supply individual machines. The achievable filtration fineness is between 1 and 5 µm in NAS 3-7. The filter regeneration and cleaning of the filter discs are done manually. Advantages: Small footprint Excellent filtration results Low installation effort The filter geometry can be customized to match the machining machine (on request) Affordable price Operating Principle: Swelling: The entire tank is filled with oil. Before filtration can begin, the filter discs (1) need to be swollen with a filter aid (diatomaceous earth, cellulose, perlite). Filtration: After the precoat, the operator manually switches to filtration and directs the filtrate into the clean tank (2). The system pump can now be switched on to supply the processing machine. The achievable filtration fineness is 1 – 5 µm, depending on the filter aid used.

Mobile, compact and multifunctional. Whether as manual spraying equipment or on a fully automatic robot spraying system, the compact supply tank with its 45 litre stainless steel tank is suitable for all tasks. Equipped as standard with a pneumatic lifting device, handling is particularly easy. By using proven components, the sprayer is perfectly suited for continuous operation. The device is suitable for spraying lubricants or coatings with a high solid content. To change the tank or clean it, the complete tank cover with all attachments is lifted pneumatically.

STAUFF Offline Filter Units can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated motor/pump unit draws fluid out of the tank, filters it and pumps clean oil back into the system. Offline Filter Units can continue to work even when the main system is not in use. Motor/Pump Unit ▪ Available in different configurations ▪ Air driven motors Clogging Indicator (available as an option) ▪ Visual clogging indicator Micro Filtration Elements ▪ Micro filter elements of SRM series Construction ▪ Offline filter with integrated motor/pump unit ▪ Offline filter units with up to four filter housings in single or double length configurations Nominal Flow Rate ▪ 2,1 ... 17 l/min / .55 ... 4.5 US GPM Max. System Volume ▪ Up to 10.800 l / 2.853 gal Port Connection ▪ G3/8, G1/2, G3/4 and 18 L Materials ▪ Anodised Aluminium Media Compatibility ▪ Mineral and lubrication oils, other fluids on request

The approved and economic system of this multi-tank-machine offers various possibilities for all applications in the area of the production and manufacturing industry. Most different process steps like cleaning, rinsing, inter-rinsing and drying makes the machine the all-round talent. The PERKUTE system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Simple operation Adjustable feed fork-lift facility incl. 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Electronic basket drive Tank cover in the return flow, filter basket incl. Long wash liquid service life due to the skimmer (washing tank) Programmable operation operating counter incl. Automatic steam extraction by air blower Powerful washing pump in the washing- and rinsing tank High permissible basket load 2" socket slide valve for the tank emptying Safety limit switch at cover Separate washing- and rinsing tank

FULLY AUTOMATIC CENTRIFUGATION FOR CLEANING YOUR PROCESS WATERThe PLC-controlled peeling centrifuges of the ZA range are your reliable aid for fully automatic process water cleaning. The sludge is separated in a rotating drum and automatically peeled off into a sludge tank. You can set the cleaning cycles individually. MODULAR DESIGN FOR INDIVIDUAL SOLUTIONS The ZA range features a modular design, allowing you to flexibly adjust it to your needs. Select the dirt and process water tank, available in a range of sizes, as well as the additional process water pumps, dosing units or a heat exchanger, suitable for both the ZA 04 and ZA 06 configurations. THE BENEFITS AT A GLANCE Centrifuges with up to 2,417 times the acceleration of gravity PLC for fully automatic operation Two configurations: ZA 04 with a cleaning power of 1,000 l of process water per hour ZA 06 with a cleaning power of 2,000 l of process water per hour

Efficiency and quality of this innovative cleaning system are impressive, from the three-dimensional small parts to large format workpieces in large batch sizes. The performance of the CO2 ice jet is especially convincing when cleaning plastic workpieces. The shown surface plant offers optimum noise emission values of approx. 80dB(A) due to the patented noise protection system comprising follower-type bulkhead partitions. A cleaning jet consisting of a mix of compressed air, CO 2 and CO 2 ice particles causes the soiling on the surface to become brittle. The thermal tension loosens cohesion and detaches the soiling from the workpiece surface. The cleaning jet guarantees the removal of soiling without residue. The DUST FREE and PERFECT applications optimally meet the requirements of the subsequent downstream surface quality, offering maximum thoroughness from dust removal through to cleaning. This process allows gentle cleaning of virtually all components, therefore, it is an alternative to aqueous power washing. Patented detail solutions form the basis for this mature system technology. Small workpieces are reliably held in place by the special hold-down system. The Venjakob pump station developed for this task guarantees the process reliable supply of liquid CO 2 from a low pressure tank system to the cleaning module. A clear advantage of the CO 2 cleaning system over the conventional aqueous cleaning process is its relatively small space requirement.

The application of CO 2 ice jet spraying is convincing. Ranging between CO 2 cleaning and high-performance dust removal with regard to quality, optimum pretreatment can be accomplished with this system variant, only requiring simple workpiece fixing and little noise protection measures. DUST FREE can be flexibly integrated in existing equipment. A cleaning jet consisting of a mix of compressed air, CO2 and CO2 ice particles causes the soiling on the surface to become brittle. The thermal tension loosens cohesion and detaches the soiling from the workpiece surface. The cleaning jet guarantees the removal of soiling without residue. The DUST FREE and PERFECT applications optimally meet the requirements of the subsequent downstream surface quality, offering maximum thoroughness from dust removal through to cleaning. This process allows gentle cleaning of virtually all components, therefore, it is an alternative to aqueous power washing. Patented detail solutions form the basis for this mature system technology. Small workpieces are reliably held in place by the special hold-down system. The Venjakob pump station developed for this task guarantees the process reliable supply of liquid CO 2 from a low pressure tank system to the cleaning module. A clear advantage of the CO2 cleaning system over the conventional aqueous cleaning process is its relatively small space requirement. Additional decisive advantages of this system are: