Tubes - Import export

Tubing Aluminium

Tubing Light grey RAL 7035

Top tube 12253 made of PVC for the floor sockets 7601A, 7602A, 7604A, 7701E, 7701M. For use in wet conditions when plugged in.

Tubing White aluminium RAL 9006

Tubing Stainless steel

Aluminiumwerk Unna AG is specialised in the production of Aluminium tubes. The Aluminium tubes are extruded on site using two possible methods. These are either Seamless extrusion or Porthole extrusion. It is quite simple to distinguish between the two extrusion methods. In seamless extrusion, a mandrel is positioned and fixed inside the extrusion die, creating the inner contour of the tube. In porthole extrusion, the mandrel is fixed and is supported by a number of integral bridges affixed to the outer portion of the extrusion die.

Rain protection set 12256 consisting of an extension made of PVC and a black protective cap made of soft PVC for the floor sockets 7501A, 7601A, 7602A, 7604A and 7701AW. The rain protection set offers ideal protection against rain with plugged-in connections. Use: Proper installation and proper use is required. The seals must be cleaned of dirt regularly and the products must be checked to ensure they are in perfect condition.

Sheathing tube resistance thermometer Pt100

Sheathing tube resistance thermometer NTC 10 kOhm

Sheathing tube resistance thermometer Pt1000

Sheathing tube resistance thermometer Ni120

Sheathing tube resistance thermometer NTC 10 kOhm

Sheathing tube resistance thermometer Pt1000

Tubing Special request Other outer diameter, other wall thickness, other RAL color

Tubing Black RAL 9005

Tubing Zinc yellow RAL 1018

• with the rubber band the opener gets a good grip on the lid • that way jars, bottles and tubes can be opened easily • also ideal as can puncher/cap lifter

Finned tubes for efficient heat exchange Large exchange area in a small space By using finned tubes (also known as corrugated rib tubes), optimal heat exchange can be achieved in a small space. By applying so-called ribs to smooth tubes, the exchange area of ​​the tubes is increased considerably. Finned tubes are usually used where an optimal temperature exchange between gaseous media and liquids is to be achieved. Different designs for every purpose In many cases, finned tubes are built into production machines as a component in machine and apparatus construction. Finned tubes can be designed for a variety of special application conditions. The length, the design and the ribbing can be individually adapted.

The smart companion for many different sites: a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality. Tube measurements up to 60 mm, up to 80 mm and up to 115 mm are covered, depending on the machine. It is also feasible to bend tubes with imperial sizes with the standard tools.

Induction hardened shafts, manufactured to the tightest tolerances according to ISO h6, piston rods for the hydraulic sector or headrests in the automotive sector. These are just three of many hundreds of application examples. Further applications can be found in railroad technology, shipbuilding and renewable energy.

Tubes made of aluminum offer various advantages, such as corrosion resistance, low weight and high stability. Aluminum tubes are very durable and can be recycled without loss of quality. A wide variety of constructions can be realized with tubes made of aluminum.

Whether chassis applications with high dynamic stress and safety-relevant functions or lightweight solutions for the highest crash requirements. Our claim is to find the technically and economically best solution for your individual requirements

The light weight and pliability of aluminum make it easy to work with and can streamline installation. In addition to the weight advantage and ductility, aluminum provides a complete barrier to light, moisture and magnetic waves. Impermeable to all gases including oxygen, aluminum also provides superior fireproofing capabilities for both industrial and residential construction. Aluminum insulation offers good noise reduction properties along with resistance to corrosion and heat. Not only does this improve interior environments, it also increases product life and efficiency. These proven characteristics continue to make aluminum the leader in insulation and the preferred choice for all types of building and construction.

There are many good reasons to separate tubes chiplessly. And first of all, of course, the cleanliness. Precision and output, too, are not insignificant. Our chipless orbital cutting machines make precise cutting results possible. Your tubes can be formed immediately afterwards. That saves time and money. Technical specifications: Separation efficiency: max. Ø 28 x 2 mm for stainless steel tubes Shortest separation length: — 25 mm (without pull apart) — 55 mm (with pull apart) Separation efficiency: up to 2,000 pcs per hour

The X2000NC is a modular, fully servo-electric wire and tube bending machine that can be configured to customer specifications with various servo-electric units such as NC finger benders, bending slides and presses up to a force of 7000kN. Due to the variable positioning possibilities of the units, a great variety of different forming processes can be realized on the machine. This makes it possible to produce a wide variety of wire, tube and strip products on one X2000NC. Dimensions: from app. 5,50m x 2,50m, app 10 - 30 to.

Our Speedmax is the fastest available wire and tube forming automation solution available on the market for bending machines. By combining NC finger benders with our servo-electric transfer, the Speedmax with its 90 servo axes can reach a speed of up to 4,000 machining steps per minute. The SPEEDMAX is available in three variants (S,M,L). The SPEEDMAX (S) has 20 processing stations and can produce up to 200 parts per minute. The machine concept combines the advantages of 3D-NC wire bending and wire bending by slides. Bending, embossing, notching, flattening, joining, punching, swaging of tubes and wire are possible production technologies in the 20 processing stations. The new SPEEDMAX L has actually 20 processing stations and can produce up to 60 parts per minute. The SPEEDMAX L can work with tube and wire up to a diameter of 12mm and a feed length of 50cm. Various bends in all levels and in the current equipment up to four swaging processes are possible.

Novelis is the global leader in rolled aluminum products and aluminum beverage can recycling. Our technical competence and innovation have made us a development partner chosen by leading companies from the automotive, building, printing and packaging industries, among others. With its customer orientation and strong industrial performance, Novelis plays a crucial part in shaping products for the future. The aluminium content means that there is only slight thermal length variation, just like with metal tubes. In addition, the tubes become completely oxygen-impermeable, which is indispensable when connecting radiators, for example. Using state-of-art production facilities and experienced specialists, Novelis ensures top quality in the manufacture of its products – across the entire production process, from casting and processing the ingots via hot and cold rolling, to packaging.

stainless steel*band width 11 mm

The smart companion for many different sites: a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality. Tube measurements up to 60 mm, up to 80 mm and up to 115 mm are covered, depending on the machine. It is also feasible to bend tubes with imperial sizes with the standard tools.